SOURCES SOUGHT
25 -- CL20192187-LTC
- Notice Date
- 9/1/2020 9:28:48 AM
- Notice Type
- Sources Sought
- NAICS
- 336390
— Other Motor Vehicle Parts Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- CL20192187-LTC
- Response Due
- 9/10/2020 10:00:00 AM
- Archive Date
- 09/25/2020
- Point of Contact
- Bret Griffin, Phone: 6146921148
- E-Mail Address
-
bret.griffin@dla.mil
(bret.griffin@dla.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- Please review the below NSN and provide us with any sources that are able to manufacture the item. Please also provide the location of the manufacturer (City and State OR country if applicable). Please also provide POCs for these manufacturers if available. All of this information can be submitted to: Bret.Griffin@dla.mil, Phone 614-692-1148. We thank you in advance for your assistance. NSN - 2540-01-255-3347 - *** LTC PID Packaging Consolidated Text *** - PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. NSN:012553347 ���� PARTS KIT, HULL SEMI-ANNUAL ���� REFERENCE NUMBER:RQ032 ���� REFERENCE NUMBER:RD002 ���� REFERENCE NUMBER:RP001 ���� REFERENCE NUMBER:RA001 ���� REFERENCE NUMBER:RQ001 ���� REFERENCE NUMBER:RQ002 ���� REFERENCE NUMBER:RQ009 ���� REFERENCE NUMBER:RQ011 ���� REFERENCE NUMBER:RQ016 ���� CONTRACTOR CERTIFICATE OF CONFORMANCE REQUIRED ���� REFERENCE NUMBER:RS023 ���� REFERENCE NUMBER:CS147 ���� REFERENCE NUMBER:CS187 ���� REFERENCE NUMBER:ZD080 ���� QUALITY ASSURANCE PROVISIONS (QAPS): ���� PROVIDED I/A/W THE FOLLOWING DRAWINGS, ���� 12273559,12284708,12286856,12387379 AND 12287953. ���� EXCEPTION TO DRAWING 12345800 NOTE 2: MIL-R-2765 BE USED IN LIEU OF ���� MIL-R-3065. ���� PROVIDE 1 EACH OF THE FOLLOWING PART NUMBER 12345800-2, 12345800-3, AND ���� 12345800-4. ���� EXCEPTION TO DRAWING 12961043: GLOVES ALLEGIANCE HEALTHCARE CORP. CAGE ���� 07TA6 PART NUMBER 2D7088 OR MAXIM MEDICAL INC. CAGE 06US7 PART NUMBER ���� 480215 MAYBE USED IN LIEU OF CAGE 89875 PART NUMBER E-011. ���� EXCEPTION TO DRAWING 11610298: CAGE 87405 PART NUMBER CF-308-2PL IS ���� APPROVED BY ESA. ���� EXCEPTION TO DRAWING 12285860 PER CAGE 22627 VENDOR PART NUMBER CHANGED ���� TO 02-03120BG01. ���� EXCEPTION TO DRAWING 5705438: NSN FOR LITHIUM BATTERY ON PAGE 4 SHOULD ���� READ 6135-01-481-7127 IN LIEU OF 6135-01-441-5746. ���� USE MIL-STD-129P W/CHG 2 ���� CRITICAL APPLICATION ITEM ���� IAW BASIC DRAWING NR 19207 5705438 ���� REVISION NR AG� DTD 08/15/2011 ���� PART PIECE NUMBER: 5705438 ���� IAW REFERENCE QAP 19207 12273559 ���� REVISION NR���� DTD 03/22/1993 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12287953 ���� REVISION NR F�� DTD 06/30/1993 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12288306 ���� REVISION NR R�� DTD 04/12/1996 ���� PART PIECE NUMBER: REFERENCE ���� IAW REFERENCE DRAWING NR 19207 12387272 ���� REVISION NR B�� DTD 08/09/2016 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 11602062 ���� REVISION NR H�� DTD 08/01/2015 ���� PART PIECE NUMBER: REFERENCE ���� IAW REFERENCE QAP 19207 12284708 ���� REVISION NR D�� DTD 11/16/2011 ���� PART PIECE NUMBER: ���� IAW REFERENCE QAP 19207 12286856 ���� REVISION NR D�� DTD 05/10/2013 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12336831 ���� REVISION NR H�� DTD 11/12/1996 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12336814 ���� REVISION NR K�� DTD 03/02/2007 ���� PART PIECE NUMBER: 12336814-8, -10 & -11 ���� IAW REFERENCE DRAWING NR 19207 12273563 ���� REVISION NR U�� DTD 12/10/2008 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12345034 ���� REVISION NR A�� DTD 09/21/1987 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19206 12312058 ���� REVISION NR A�� DTD 04/27/1987 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19200 5911304 ���� REVISION NR D�� DTD 06/28/2005 ���� PART PIECE NUMBER: 5911304-134 ���� IAW REFERENCE DRAWING NR 19207 11610298 ���� REVISION NR F�� DTD 03/29/1993 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12273464 ���� REVISION NR C�� DTD 01/11/1991 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19200 12272827 ���� REVISION NR L�� DTD 06/06/1995 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19200 9377334 ���� REVISION NR A�� DTD 09/17/1991 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12286856 ���� REVISION NR K�� DTD 01/01/1939 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12284544 ���� REVISION NR A�� DTD 08/07/1992 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19206 7309998 ���� REVISION NR G�� DTD 07/23/2015 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12288067 ���� REVISION NR C�� DTD 09/12/1989 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12387269 ���� REVISION NR D�� DTD 08/09/2016 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12387299 ���� REVISION NR���� DTD 02/26/1992 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12387349 ���� REVISION NR C�� DTD 06/13/2017 ���� PART PIECE NUMBER: 12387349-35 ���� IAW REFERENCE DRAWING NR 19207 12472719 ���� REVISION NR���� DTD 09/28/2000 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19200 12987693 ���� REVISION NR B�� DTD 03/06/2017 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12273559 ���� REVISION NR I�� DTD 10/01/1999 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 11602061 ���� REVISION NR J�� DTD 06/01/2015 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12324584 ���� REVISION NR A�� DTD 11/11/1990 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 11641857 ���� REVISION NR F�� DTD 08/01/2015 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12387152 ���� REVISION NR E�� DTD 06/11/2019 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19206 12528494 ���� REVISION NR A�� DTD 06/05/2009 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19200 12283641 ���� REVISION NR C�� DTD 09/25/2006 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12288303 ���� REVISION NR G�� DTD 07/16/1996 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19206 12529740 ���� REVISION NR C�� DTD 09/03/1987 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19200 12272684 ���� REVISION NR G�� DTD 08/27/1998 ���� PART PIECE NUMBER: ���� IAW REFERENCE QAP 19207 12387379 ���� REVISION NR B�� DTD 05/28/2003 ���� PART PIECE NUMBER: ���� IAW REFERENCE QAP 19207 12287953 ���� REVISION NR���� DTD 04/16/1993 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 5705143 ���� REVISION NR G�� DTD 11/17/1999 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 11602063 ���� REVISION NR N�� DTD 08/01/2015 ���� PART PIECE NUMBER: REFERENCE ���� IAW REFERENCE DRAWING NR 19200 9377106 ���� REVISION NR D�� DTD 12/17/2010 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12284708 ���� REVISION NR F�� DTD 05/23/2003 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12301979 ���� REVISION NR B�� DTD 03/13/1990 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12344039 ���� REVISION NR E�� DTD 06/24/2005 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12345800 ���� REVISION NR B�� DTD 04/22/2003 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12387379 ���� REVISION NR C�� DTD 09/03/2002 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19200 12961043 ���� REVISION NR C�� DTD 12/14/2017 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 81205 NAS1149 ���� REVISION NR K�� DTD 02/01/2008 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 5705134 ���� REVISION NR B�� DTD 05/11/1987 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 5705155 ���� REVISION NR B�� DTD 03/16/1988 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 5705207 ���� REVISION NR C�� DTD 05/17/2002 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 11610232 ���� REVISION NR B�� DTD 08/01/2015 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 11641744 ���� REVISION NR C�� DTD 08/01/2015 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19200 12282157 ���� REVISION NR K�� DTD 03/06/2017 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 80205 NAS1149 ���� REVISION NR 2�� DTD 08/29/1994 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19200 12285860 ���� REVISION NR L�� DTD 08/08/2017 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 5705135 ���� REVISION NR E�� DTD 05/11/1987 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 12373562 ���� REVISION NR U�� DTD 09/02/2015 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 5705438 ���� REVISION NR���� DTD 08/31/2016 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19207 5705438 ���� REVISION NR S�� DTD 03/12/2012 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 19200 12285860 ���� REVISION NR K�� DTD 07/18/2016 ���� PART PIECE NUMBER: ���� PREP FOR DELIVERY ���� LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 ���� QUP:001� PRES MTHD:ZZ� CLNG/DRY:Z� PRESV MAT:ZZ ���� WRAP MAT:ZZ� CUSH/DUNN MAT:ZZ� CUSH/DUNN THKNESS:Z ���� UNIT CONT:ZZ� OPI:A ���� INTRMDTE CONT:ZZ� INTRMDTE CONT QTY:ZZZ ���� PACK CODE:U ���� MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. ���� SPECIAL MARKING CODE:ZZ -ZZ Special Requirements ���� PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 ���� PACKAGING SHALL BE IN ACCORDANCE WITH SPECIAL ���� PACKAGING INSTRUCTION AK12553347. ************************************************************************************************************ ��������������������������������������������������� GLOSSARY ************************************************************************************************************ PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: ITEM DESCRIPTION TEXT ���� REFERENCE NUMBER RQ032 ���� RQ032: EXPORT CONTROL OF TECHNICAL DATA ���� This item has technical data some or all of which is subject to ���� export-control of either the International Traffic in Arms regulations ���� (ITAR) or the Export Administration Regulations (EAR), and cannot be ���� exported without prior authorization from either the Department of State ���� or the Department of Commerce. Export includes disclosure of technical ���� data to foreign persons and nationals whether located in the United ���� States or abroad. This requirement applies equally to foreign national ���� employees and U.S. companies and their foreign subsidiaries. DFARS ���� 252.225-7048 is applicable to this data. ���� The Defense Logistics Agency (DLA) limits distribution of export-control ���� technical data to DLA contractors that have an approved US/Canada Joint ���� Certification Program (JCP) certification, have completed the ���� Introduction to Proper Handling of DOD Export-Controlled Technical Data ���� Training and the DLA Export-Controlled Technical Data Questionnaire ���� (both are available at the web address given below), and have been ���� approved by the DLA controlling authority to access the ���� export-controlled data. Instructions for obtaining access to the ���� export-controlled data can be found at: ���� https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ ���� To be eligible for award, offerors and any sources of supply proposed ���� for use are required to have an approved JCP certification and have ���� been approved by the DLA controlling authority to access ���� export-controlled data managed by DLA. DLA will not delay award in ���� order for an offeror or its supplier to apply for and receive approval ���� by the DLA controlling authority to access the export-controlled data. ���� REFERENCE NUMBER RD002 ���� RD002, COVERED DEFENSE INFORMATION APPLIES ���� REFERENCE NUMBER RP001 ���� RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ���� REFERENCE NUMBER RA001 ���� RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS ���� (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE ���� DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB ���� AT: ���� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx ���� FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE ���� SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ���� ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE ���� APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON ���� REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. ���� REFERENCE NUMBER RQ001 ���� RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND ���� NON-MANUFACTURERS) ���� REFERENCE NUMBER RQ002 ���� RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL ���� REQUEST FOR VARIANCE (DEVIATION OR WAIVER) ���� REFERENCE NUMBER RQ009 ���� RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN ���� REFERENCE NUMBER RQ011 ���� RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES ���� REFERENCE NUMBER RQ016 ���� RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS ���� LISTS (QML).� THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A ���� SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR ���� QUALIFIED MANUFACTURERS LIST (QML).� QUALIFICATION REQUIREMENTS IN ���� PROCUREMENT NOTE H02 ""COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED ���� MANUFACTURERS LIST (QML)"" APPLY. ���� REFERENCE NUMBER RS023 ���� RS023: Shelf-life requirement RS001 for a TYPE I (CODE S)� item with a ���� shelf life of 60 months (non-extendable) applies to this item. ���� REFERENCE NUMBER CS147 ���� ""THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH ���� MUST CONFORM TO SOURCE CONTROL DRAWING. BY ���� SUBMITTING AN OFFER, THE OFFEROR AGREES TO ���� PROVIDE SOURCE CONTROLLED COMPONENTS FROM ���� SOURCES APPROVED ON THE APPLICABLE SOURCE ���� CONTROL DRAWING."" ���� REFERENCE NUMBER CS187 ���� CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE ���� USED NOR INCORPORATED IN ANY ITEMS TO BE ���� DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION ���� SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT ���� DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. ���� SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR ���� APPROVAL UNLESS THEY ARE AUTHORIZED BY THE ���� SPECIFICATION REQUIREMENTS. ���� REFERENCE NUMBER ZD080 ���� SAMPLING: ���� THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ ���� H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE ���� SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, ���� STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR ���� AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF ���� VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ���� ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE ���� SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER ���� MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR ���� PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT ���� SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT ���� UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/84d97b1db0af45c8a8099dedc9be1e32/view)
- Record
- SN05782872-F 20200903/200901230145 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |