SOURCES SOUGHT
59 -- CM20098002 4 NSN LTC PROJECT
- Notice Date
- 9/18/2020 9:50:30 AM
- Notice Type
- Sources Sought
- NAICS
- 334220
— Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- 1000092037
- Response Due
- 9/25/2020 8:59:00 PM
- Archive Date
- 10/10/2020
- Point of Contact
- Suzanne Maginn, Phone: 6146927055, Tina Wolf, Phone: 614-692-7879
- E-Mail Address
-
Suzanne.Maginn@dla.mil, Kristina.Wolf@dla.mil
(Suzanne.Maginn@dla.mil, Kristina.Wolf@dla.mil)
- Description
- Contract Officer: Suzanne Maginn������ Email: Suzanne.Maginn@dla.mil CLIN 1: 5996-00-880-3562 ��AMPLIFIER, AUDIO FREQUENCY � � � � � � � � Approved Source(s) � ANDREA SYSTEMS LLC (3GET4) P/N A81-85 CLIN 2: 5996-00-880-3563 AMPLIFIER, AUDIO FREQUENCY ��������������� Approved Source(s) � ANDREA SYSTEMS LLC (3GET4) P/N A81-86 CLIN 3: 5930-00-988-5058 ADAPTER, SWITCH ACTUATOR � � � � � � � �Approved Source(s) � ANDREA SYSTEMS LLC (3GET4) P/N 824-35 CLIN 4: 5996-01-139-2843 AMPLIFIER, AUDIO FREQUENCY ��������������� Approved Source(s) � ANDREA SYSTEMS LLC (3GET4) P/N A81-105 ---------------------------------------------------------------------------------------------------------- The AMC/AMSC for the CLINS 1, 2 & 3 (NSNs) listed above is �3 C� AMC ��""3�� �Acquire, for the second or subsequent time, directly from the manufacturer AMSC �C ""�� This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. If one source is approved, AMCs 3, 4, or 5 are valid. A review of the document availability code reveals that the drawings for this item cannot be made available to the general public and manufacturer TE Connectivity (3GET4) IS uniquely qualified to manufacture this item because they are the only owners of the technical drawings and data. ---------------------------------------------------------------------------------------------------------- The AMC/AMSC for CLIN 4 (NSN) listed above is �3 B� �AMC ��""3�� �Acquire, for the second or subsequent time, directly from the manufacturer �AMSC �B� This part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. Suitable technical data, Government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application. Although, by DoD-STD-100 definition, altered and selected items shall have an adequate technical data package, data review discloses that required data or data rights are not in Government possession and cannot be economically obtained. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid. �----------------------------------------------------------------------------------------------------- Please review the NSNs listed above and provide any sources that may be able to manufacture these items. The approved sources for this NSN are currently listed above.�� All information may be submitted directly to the Contract Specialist listed above. This information must be provided by the response date indicated above.� Should a company wish to be reviewed and qualified as an �Approved Source�, they may submit an application package through the DLA Land and Maritime Alternate Offer/Source Approval Request (SAR) Program.� A SAR package contains all technical data needed to demonstrate that the prospective contractor can competently manufacture the product to the same level of quality or better than the Original Equipment Manufacturer (OEM).� The onus is on the contractor to document and demonstrate their product is equal to, or better, than the currently approved item which DLA Land and Maritime is procuring.� For further information, please reference the DLA Land Maritime web page shown below and click on the highlight: Alternate Offer/Source Approval Program for detailed explanation for the information and format necessary for a SAR and for the SAR approval process. http://www.landandmaritime.dla.mil/programs/altofferor/ Thank you in advance for your assistance.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/23dc3c6809e9490ea5310565e2f65001/view)
- Record
- SN05804025-F 20200920/200918230208 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |