SOURCES SOUGHT
30 -- Cylinder Assembly; Mine Cutter Repair Kit
- Notice Date
- 10/5/2020 7:05:42 AM
- Notice Type
- Sources Sought
- NAICS
- 333613
— Mechanical Power Transmission Equipment Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7LX-20-R-0180
- Response Due
- 10/9/2020 12:00:00 PM
- Archive Date
- 10/24/2020
- Point of Contact
- Patrick Laugherty614-692-3316, Phone: 614-406-1966
- E-Mail Address
-
patrick.laugherty@dla.mil
(patrick.laugherty@dla.mil)
- Description
- The purpose of this Sources Sought Notice is to locate interested vendors in providing the following items: 1075-00-507-1210: Mine Cutter Repair Kit; ADQ: 2; ADV: $14,864.00 3040-01-572-7391: Cylinder Assembly, Linear Actuating; ADQ: 543; ADV: $145,312.23 ���� FAR CLAUSE 52.246-11 APPLIES.� THE CONTRACTOR SHALL BE IN COMPLIANCE ���� WITH THE FULL REQUIREMENTS OF THE INTERNATIONAL ORGANIZATION FOR ���� STANDARDIZATION (ISO) 9001 STANDARD AT THE TIME OF CONTRACT ACCEPTANCE ���� OR CONTRACT MODIFICATION DATE. ���� 1.� The minimum Higher Level Contract Quality Requirements for ���� manufacturers for DLA ISO 9001:2015.� MIL-I-45208 and MIL-Q-9858 are ���� obsolete and no longer acceptable when higher level quality is required. ���� 2.� Higher-Level Contract Quality Requirement for Non-Manufacturers.� If ���� a non-manufacturer is supplying the material, the non-manufacturer ���� shall: ���� (i) Furnish items produced at a manufacturing facility conforming to the ���� higher-level contract quality requirement for manufacturers as specified ���� in paragraph 1; and ���� (ii)� Maintain and provide documented evidence that material furnished ���� under this contract was produced at a manufacturing facility conforming ���� to the specified higher-level contract quality requirement and that the ���� material meets all requirements.� At a minimum, the documented evidence ���� shall be sufficient to establish the identity of the product and its ���� manufacturing source; and include the basic item description, the ���� item(s) part number and/or national stock number, the item(s) ���� manufacturing source , the manufacturing source#s commercial and ���� government entity code (e.g. CAGE code), and clear identification of the ���� name and location of supply chain intermediaries from the manufacturer ���� to the direct source of the product for the offeror/contractor, to the ���� item(s) acceptance by the Government.� It should also include, where ���� available, the manufacturer's batch identification for the part(s), such ���� as date codes, lot codes, or serial numbers. ���� (iii) Maintain documentation of the Non-Manufacturers# quality assurance ���� program; receiving/verification processes; records management system; ���� procurement system; inventory control system; testing results; and any ���� other records associated with the material being provided.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/a80b64ff46a94e21a900f1043c0a4cc3/view)
- Record
- SN05819157-F 20201007/201005230143 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |