SOURCES SOUGHT
H -- Breathing Hose Abrasion Testing
- Notice Date
- 12/1/2020 11:16:33 AM
- Notice Type
- Sources Sought
- NAICS
- 541380
— Testing Laboratories
- Contracting Office
- W4MM USA JOINT MUNITIONS CMD ROCK ISLAND IL 61299-5000 USA
- ZIP Code
- 61299-5000
- Solicitation Number
- W52P1J-20-T-BR06
- Response Due
- 12/14/2020 9:00:00 AM
- Archive Date
- 12/29/2020
- Point of Contact
- Brian Ray, Kathleen M. Ward
- E-Mail Address
-
brian.l.ray.civ@mail.mil, kathleen.m.ward20.civ@mail.mil
(brian.l.ray.civ@mail.mil, kathleen.m.ward20.civ@mail.mil)
- Description
- This is a Sources Sought Notice (SS). This is not a solicitation for proposals, proposal abstracts or quotations. The purpose of this notice is to obtain information regarding the availability and capability of qualified contractors to provide this service.� Response to this are voluntary and no reimbursement will be made for any costs associated with providing information.� Any contractor responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the contractor's qualifications to perform the work.� Describe your process/procedures. Responses to this market research/sources sought should be sent only via Email to brian.l.ray.civ@mail.mil and kathleen.m.ward20.civ@mail.mil���� Mark any information �Proprietary� that you feel necessary. Request you include your Name, Mailing Address, CAGE Code, Business Size (Small, WOSB, SDB, VOSB, Large) and company website. Hose to be tested description:� 1 inch diameter ""corrugated"" hose (is able to be compressed and stretched in the axial direction), resists crushing with embedded wire (radial direction), made from a polymer material that may or may not have a textile covering.� The primary material of the hose will either be isopropyl rubber or an EPDM/Butyl rubber combination.� Minimum of 2 different designs with 5 hoses each to be tested, up to 3 designs maximum.� The Government will provide the hoses to be tested. Testing desired:� Abrasion testing of up to 3 designs of the hose, without separation of hose materials, to determine acceptability of new designs.� Contractor to propose data to be collected, examples include but are not limited to weight lost after set number of cycles or wire exposure after quantity of cycles.� Proposed testing procedure to be submitted for Government acceptance before testing is to begin.� Final product to include actual data and comparisons between designs via a final test report.� NOTE:� Ability to test leakage after abrasion testing is preferred but not required.�
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/031163e3edb34e3dbb0d956952f8736e/view)
- Place of Performance
- Address: USA
- Country: USA
- Country: USA
- Record
- SN05863982-F 20201203/201201230142 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |