SOURCES SOUGHT
47 -- CM20315001 PROJECT NSN 4720-01-646-6755
- Notice Date
- 12/1/2020 7:19:40 AM
- Notice Type
- Sources Sought
- NAICS
- 326220
— Rubber and Plastics Hoses and Belting Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- 1000110193
- Response Due
- 12/7/2020 8:59:00 PM
- Archive Date
- 12/22/2020
- Point of Contact
- Suzanne Maginn, Phone: 6146927055, Kristina Wolf, Phone: 6146927879
- E-Mail Address
-
Suzanne.maginn@dla.mil, Kristina.wolf@dla.mil
(Suzanne.maginn@dla.mil, Kristina.wolf@dla.mil)
- Description
- Contract Specialist: Suzanne Maginn����� Email: Suzanne.Maginn@dla.mil NSN: 4720- 01-646-6755�� HOSE, NONMETALLIC Drawings � NSN 4720-01-646-6755 HOSE ASSEMBLY, NONMETALLIC HYDROSTATIC TEST CERTIFICATE REQUIRED TO BE PROVIDED WITH EACH HOSE ASSEMBLY.� ATTACH CERTIFICATES IN SUCH A WAY THAT ENSURES THEY ARE STILL ATTACHED WHEN THEY REACH THEIR FINAL DESTINATION, WHICH COULD INVOLVE MULTIPLE INTERIM SHIPMENTS.� DO NOT REMOVE CERTIFICATE. CERTIFICATE IS ONLY TO BE REMOVED BY END USER. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO-BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. FULL AND OPEN COMPETITION APPLIES. RS030: Shelf-life requirement RS001 for a TYPE I (CODE W) item with a shelf life of 120 months (non-extendable) applies to this item. CRITICAL APPLICATION ITEM IAW BASIC SPEC NR MIL-PRF-370L REVISION NR L�� DTD 07/11/2019 PART PIECE NUMBER: M370C100O5000 IAW REFERENCE STD NR MIL-STD-129R (2) REVISION NR R�� DTD 09/27/2019 PART PIECE NUMBER: IAW REFERENCE QAP 16236 SQAPMIL-PRF-370 REVISION NR���� DTD 09/02/2009 PART PIECE NUMBER: ---------------------------------------------------------------------------------------------------------- The AMC/AMSC for the NSN listed above is �1G� AMC ����""1"" �������� Suitable for competitive acquisition AMSC ""G� ����� �The Government has unlimited rights to the technical rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2. ---------------------------------------------------------------------------------------------------------- Please review the NSN listed above and provide any sources that may be able to manufacture these items. The approved sources for this NSN are currently listed above.�� All information may be submitted directly to the Contract Specialist listed above. This information must be provided by the response date indicated above.� NOTE: This project contains Drawings/Specifications. � Drawings/TDP are accessed in the cFolders at the following website: � https://pcf1.bsm.dla.mil/cfolders Offerors are asked to reference the LTC project number CM20315001 in lieu of solicitation number in cFolders.� Search for the project CM20315001 under �Collaborative scenarios� when searching in cFolders. The drawings cannot be accessed through DIBBS. See the attachments for the Market Research Questionairre and Spreadsheet - please return the completed items to the buyer. Thank you in advance for your assistance.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/e6ce4bf57f91448bb1dc633a5d773842/view)
- Record
- SN05864047-F 20201203/201201230142 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |