SOURCES SOUGHT
66 -- Calibrator Set, Radiac
- Notice Date
- 4/29/2021 10:50:31 AM
- Notice Type
- Sources Sought
- NAICS
- 334519
— Other Measuring and Controlling Device Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7M921R0007
- Response Due
- 5/7/2021 12:00:00 PM
- Archive Date
- 05/22/2021
- Point of Contact
- Ken Pliska614-692-5373, Herman Poe614-692-2865
- E-Mail Address
-
Ken.Pliska@dla.mil, Herman.Poe@dla.mil
(Ken.Pliska@dla.mil, Herman.Poe@dla.mil)
- Description
- Review the below NSN and provide us with any sources that are able to manufacture the item. Also, provide the location of the manufacturer (city and state OR country, if applicable). Please provide the POCs for these manufacturers, if available. All of this information can be submitted to Ken Pliska at ken.pliska@dla.mil, Phone (614) 692-5373. Thank you for your time and cooperation. NSN��� 6665-01-416-7938 CALIBRATOR SET, RADIAC RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES Hazard Communication Standard Notice: Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities. The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals.� As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels. In accordance with the revised standard after June 1, 2015: 1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R.� 1910.1200 for hazardous materials delivered to the Government. 2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government. 3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200. For more information on SDS, refer to OSHAs website, available at:� https://www.osha.gov/law-regs.html For information on 29 C.F.R. 1910.1200, refer to the below link:� https://www.osha.gov/dsg/hazcom/index.html ---- **IF** AN ITEM CONTAINS HAZARDOUS MATERIAL(S), A MATERIAL SAFETY DATA SHEET (MSDS) AND THE SUBMISSION OF HAZARD WARNING LABELS SHALL BE PROVIDED TO DSCC-VSS AT THE TIME OF THE QUOTE. THE MSDS MUST BE COMPLETED IN IT'S ENTIRETY IN ACCORDANCE WITH FED-STD-313 (MATERIAL SAFETY DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES). .OFFEROR SHALL DETERMINE IF THEIR PRODUCT MEETS THE DEFINITION OF ""HAZARDOUS MATERIAL"" AS DEFINED UNDER THE LATEST VERSION OF FED-STD-313. THE OFFEROR MUST LIST ANY HAZARDOUS MATERIAL AS DEFINED IN ACCORDANCE WITH FED-STD-313 AND FAR 52.223-3. **IF** ITEM IS NOT CLASSIFIED AS A HAZARDOUS MATERIAL, IN ACCORDANCE WITH FED-STD-313, THE OFFEROR SHALL DISREGARD THE REQUEST FOR DOCUMENTATION SUBMISSION. MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO OR COME IN DIRECT CONTACT WITH ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;� AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). RS011: Shelf-life requirement RS001 for a TYPE I (CODE H) item with a shelf life of 12 months (non-extendable) applies to this item. CRITICAL APPLICATION ITEM Sierra Monitor Corporation DBA 66647 P/N N-18004
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/59c5ee89b450451ba30e38062a0ba281/view)
- Place of Performance
- Address: Columbus, OH 43218, USA
- Zip Code: 43218
- Country: USA
- Zip Code: 43218
- Record
- SN05987873-F 20210501/210429230128 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |