SOLICITATION NOTICE
36 -- KB Mirrors (Build to Print) for 3 Beamlines at ANL
- Notice Date
- 6/28/2021 4:55:40 AM
- Notice Type
- Solicitation
- NAICS
- 423490
— Other Professional Equipment and Supplies Merchant Wholesalers
- Contracting Office
- ARGONNE NATL LAB - DOE CONTRACTOR Lemont IL 60439 USA
- ZIP Code
- 60439
- Solicitation Number
- 1-B158-P-00311-00
- Response Due
- 7/13/2021 3:00:00 PM
- Archive Date
- 07/28/2021
- Point of Contact
- Kelli Kizer, Phone: 6302525677
- E-Mail Address
-
kkizer@anl.gov
(kkizer@anl.gov)
- Description
- The Advanced Photon Source Upgrade Project (UPS-U) is planning a storage-ring upgrade that will reduce the electron-beam emittance by a factor of ~75.� This ultra-low emittance is achieved by replacing the present storage ring lattice with a multi-bend achromat (MBA) lattice.� The MBA lattice will increase the coherent x-ray fraction by two orders of magnitude and decrease the horizontal source size by a factor of ~20.� In addition, the APS-U is planning to build eight new featured beamlines and make optics upgrades to many others. BUILD TO PRINT - This SOW describes the requirements for endstation bendable KB mirrors to be installed on APS-U insertion-device beamlines.� A reference paper (Reference paper_bender mirror.pdf) of an in-house bender mirror design is attached to the�SOW. A pair of bendable KB mirrors consists of two polished mirror substrates with optical coatings and the bonded adaptor plates for the bender assembly.� Each sector has an associated Appendix that describes detailed specifications of the mirror shapes, dimensions, orientations, materials, and figure errors.This scope contains a total of 6 flat mirror substrates for 3 bendable KB mirror pairs.� The endstation KB mirror pairs as a function of beamline.� The mirror pairs are designated using the following code QID-KB-X-YZ,� where Q is the Sector number 8, 9, or 34; KB stands for KB mirror; X is the mirror pair index; Y defines vertical or horizontal deflection and its direction U (vertical up), D (vertical down), I (horizontal inboard), or O (horizontal outboard); and Z denotes the prefiguring of the mirror substrate, which is always F (flat and bendable) in the�SOW.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/06fb5ef8496e4ed7a5afd485642b239a/view)
- Record
- SN06044875-F 20210630/210628230112 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |