SOURCES SOUGHT
48 -- 1 NSN SOURCES SOUGHT
- Notice Date
- 5/10/2022 10:26:29 AM
- Notice Type
- Sources Sought
- NAICS
- 332912
— Fluid Power Valve and Hose Fitting Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7MX22R0111
- Response Due
- 5/19/2022 10:00:00 AM
- Point of Contact
- Scott D. Knowles, Phone: 6146920639
- E-Mail Address
-
scott.knowles@dla.mil
(scott.knowles@dla.mil)
- Description
- ***Sources Sought*** This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10.� � � � � � � � � � � � � � � � � � � � � � NO SOLICITATION IS BEING ISSUED AT THIS TIME. � The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below. �Please review the below NSNs and provide us with any additional sources that are able to manufacture these items. �Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information. �All of this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil. �Phone 614 692-0639. We thank you in advance for your assistance. NSN�� ��� ��� �NAME�� ��� ��� ��� � 4820-01-550-4881�� �VALVE, LINEAR, DIRECTIONAL CONTROL �� � VALVE, LINEAR, DIRECTIONAL CONTROL (SHUTTLE VALVE ASSEMBLY) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS � � �(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE � � �DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB � � �AT: � � �http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx � � �FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE � � �SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. �FOR LARGE � � �ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE � � �APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON � � �REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND � � �NON-MANUFACTURERS) RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL � � �REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES Q0037: CLAUSE 52.246-15, CERTIFICATE OF CONFORMANCE, � � �IS NOT AUTHORIZED FOR THIS NSN UNLESS APPROVED BY THE ESA. ZQA03: THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM � � �(CSI). � � �ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE � � �FORWARDED TO THE DSC CONTRACTING OFFICER FOR � � �REVIEW AND APPROVAL. � � �. � � �ALL ITEMS OF SUPPLY SHALL BE MARKED IAW � � �MIL-STD-129. �IN ADDITION, EACH UNIT PACK WILL � � �BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), � � �CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S � � �CAGE CODE AND PART NUMBER. �CRITICAL APPLICATION ITEM � � �IAW BASIC DRAWING NR 16236 RE-015504881 � � �REVISION NR � � DTD 09/23/2021 � � �PART PIECE NUMBER: � � �IAW REFERENCE STD NR MIL-STD-1330D(1) � � �REVISION NR D � DTD 06/28/2007 � � �PART PIECE NUMBER: PREP FOR DELIVERY PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 � � �QUP:001 �PRES MTHD:33 �CLNG/DRY:Z �PRESV MAT:00 � � �WRAP MAT:ZZ �CUSH/DUNN MAT:00 �CUSH/DUNN THKNESS:0 � � �UNIT CONT:D3 �OPI:M � � �INTRMDTE CONT:E5 �INTRMDTE CONT QTY:AAA � � �PACK CODE:U � � �MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. � � �SPECIAL MARKING CODE:ZZ -ZZ Special Requirements � � �PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING � � � REQUIREMENTS FOR PROCUREMENT CS284: EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN, � � �CONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE � � �CODE, MANUFACTURER CAGE CODE, AND PART NUMBER. IP042: Oxygen Clean Packaging and Marking Requirements Apply CLEANING SHALL BE IAW THE REQUIREMENTS OF MIL-STD-1330D. � � �""Unit, intermediate, and exterior shipping container shall be marked in � � �accordance with MILSTD129. � � �In addition, each level of packing shall contain a label, marked with � � �letters, maximum two inches and minimum one-half inch high on two (2) sides� � � �and two (2) ends as follows: � � �""SPECIAL CLEAN O2N2"" --------------------------------------------------------------- Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/2300e95cadf6494b9d8046f49b04ac23/view)
- Place of Performance
- Address: Columbus, OH 43218, USA
- Zip Code: 43218
- Country: USA
- Zip Code: 43218
- Record
- SN06323295-F 20220512/220510230059 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |