SOLICITATION NOTICE
66 -- Blue UAS capable of Carrying Lidar Sensor, NDAA Compliant Lidar Sensor, Sensor Integration Lidar Software, Training, Support
- Notice Date
- 9/20/2022 8:52:12 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334519
— Other Measuring and Controlling Device Manufacturing
- Contracting Office
- W07V ENDIST ST LOUIS SAINT LOUIS MO 63103-2833 USA
- ZIP Code
- 63103-2833
- Solicitation Number
- W912P922R0053
- Response Due
- 9/27/2022 8:00:00 AM
- Archive Date
- 10/12/2022
- Point of Contact
- Elena Coleman, Phone: 3143318527
- E-Mail Address
-
Elena.C.Coleman@USACE.ARMY.MIL
(Elena.C.Coleman@USACE.ARMY.MIL)
- Description
- All bids shall be submitted via email to Elena Coleman at Elena.C.Coleman@USACE.ARMY.MIL no later than 1000 CST, 27 September 2022. Please select the amended document containing Appendixes on pages 8 and 9 for further information. � UAS Platform Requirements Quadcopter or multirotor (NDAA compliant or Blue list approved) 5 lb. carrying capacity 30-minute flying time on single battery for 5 lb. payload NDAA Compliant control (ground control station) Minimum total endurance (with additional batteries) of 120 minutes Battery Charging Unit Drone Case Custom payload integration for Lidar Sensor Additional replacement propellers Sensor: Lidar Payload Requirements: NDAA compliant Integrated camera (capable of producing colorized point cloud) Camera can produce orthophotos (greater than 20 MP resolution) Capable of flying up to 300 ft. AGL Capable of at least two returns Absolute vertical accuracy <=5cm RMSE Kinematic Post-processing Payload costs less than $60,000 (excluding UAS and software) Software: UAS Flight Planning software � No subscription. Must be a perpetual license with lifetime support for firmware updates. LiDAR - Software yearly only maintenance under� $3,035 on all systems. Point cloud generating software IMU trajectory software (Future cost Savings) Post processing software � Not having additional post processing software other than QT Modeler, Global Mapper, and/or ArcGIS Pro.� These three post processing point cloud software are paid for by a USACE Enterprise License Agreement.� No additional funding source would be required either for a perpetual upfront cost or a year-to-year cost. Training Requirements UAS OEM Flight planning course Lidar Planning and Flight Automation Course Lidar OEM sensor training Lidar data processing training Support (minimum): 1 year warranty 20 hours of technical support Maintenance cost: (Future cost Savings) Hardware and software maintenance under $12,000 per year
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/3bddcc9b0eb043a78562fb7b13dcf48f/view)
- Place of Performance
- Address: TX 77553, USA
- Zip Code: 77553
- Country: USA
- Record
- SN06472661-F 20220922/220920230125 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |