SOLICITATION NOTICE
99 -- Mobile Column Lift Extra Wide
- Notice Date
- 11/29/2022 12:32:02 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333923
— Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
- Contracting Office
- GSA/FAS SCIENTFC,TEMP SVCS,ADINT FORT WORTH TX 76102 USA
- ZIP Code
- 76102
- Solicitation Number
- 47QSWA-23-Q-0101
- Response Due
- 12/6/2022 3:00:00 PM
- Archive Date
- 02/06/2023
- Point of Contact
- Cynthia Bruce, Phone: 817-850-8383
- E-Mail Address
-
cindy.bruce@gsa.gov
(cindy.bruce@gsa.gov)
- Description
- ITEM PRODUCT DESCRIPTION Must be one set of 6 wireless mobile column lifts extra wide which includes the following specifications. Specifications Sizes and Capacity: Lift size: 1216mm depth x 1120mm width x 2674mm height Lifting Capacity: Each post 18,500 pounds Electricity Consumption Power: 24 Volts DC Control Box on every column and adjustable forks Column base width 49.25 inches Column base depth 48.8 inches Column height � 97 inches Column weight 1310 pounds The lift system shall be fitted with the ALI GOLD CERTIFICATION LABEL at the time of delivery. Should meet ISO 9001 Certification standard. The system shall be hydraulically operated. Spindle based technology is not acceptable. Secondary mechanical locks shall be used to ensure safety during use. Lifting carriage locking profile shall not be greater than 1 1/3� and the first locking position shall engage after no more than five (5) inches of lifting. Electrical and hydraulic equipment shall be suitable for all weather use indoors and outdoors and be NEMA4 certified. The system shall utilize a lowering mode known as �Turtle Function� which allows the operator to lower the lift speed. The lifting system shall have the ability to communicate wirelessly between columns without the use of cords or cables of any kind. Zigbee wireless communication protocol is preferred to assure a safe, secure connection is established. Carriage guides shall be manufactured using oil filled, nylon rollers, which are warranted for life and require no maintenance. The lift will be 12v powered and recharge on standard 110v outlet. Carriage Fork Length must be at least 14 inches to properly engage oversized 1600R20 tires. Wide Body carriage for lifting HEMMT, PLS/LVRSR and HET vehicles with 1600R-20-inch military flotation type tires shall be included. (Minimum width of 27 inches and outside width of 35 inches is needed) The motor driven screw jack must operate without any hydraulic fluid. 2-year Warranty on Parts and labor are included. Shipping, set up, and Training are included. End of Item Description
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/84c038051efb44d0a82bf295260b137f/view)
- Record
- SN06530146-F 20221201/221129230111 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |