SAMDaily.us | PRESOL | 66 | Procurement of a Polatis Switch

SAMDAILY.US - ISSUE OF DECEMBER 03, 2022 SAM #7673
SOLICITATION NOTICE

66 -- Procurement of a Polatis Switch

Notice Date: 12/1/2022 10:15:09 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 334516 — Analytical Laboratory Instrument Manufacturing
Contracting Office: DEPT OF COMMERCE NIST GAITHERSBURG MD 20899 USA
ZIP Code: 20899
Solicitation Number: 1333ND22QNB770542
Response Due: 12/10/2022 7:00:00 AM
Archive Date: 12/25/2022
Point of Contact: Brian Jamieson, Phone: 3019758276
E-Mail Address: brian.jamieson@nist.gov
(brian.jamieson@nist.gov)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: CLASSIFICATION CODE:� 66 � Instruments and Laboratory Equipment TITLE: Procurement of a Polatis Switch SOLICITATION NUMBER:� 1333ND22QNB770542 RESPONSE DATE: 12/10/2022 � CONTACT POINTS: Brian Jamieson, Contract Specialist, (301) 975-8276 �� Robert Cowins, Contracting Officer, (301) 975-8335 �� DESCRIPTION:� The National Institute of Standards and Technology (NIST) has a requirement for equipment to be utilized by the Information Technology Laboratory (ITL) at NIST, Gaithersburg, MD campus. THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A SEPARATE WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED.� THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES UNDER THE AUTHORITY OF FAR PART 13. This solicitation is a Request for Quotations (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2022-08 dated 09/23/2022. 1352.215-72 INQUIRIES (APR 2010) Offerors must submit all questions concerning this solicitation in writing to brian.jamieson@nist.gov. Questions should be received no later than three calendar days after the issuance date of this solicitation. Any responses to questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the question responses included in the amendment to the solicitation will govern performance of the contract.� (End of Provision) The associated North American Industrial Classification System (NAICS) code for this procurement is 334516 - Analytical Laboratory Instrument Manufacturing with a small business size standard of 1000 employees. This is acquisition being solicited using 100% small business set-aside.� All offerors shall provide a quotation for the following line items: CLIN 0001: Description: The contractor shall provide Polatis Series 6000 Ultra Secure grade 8x8 Switch in accordance with the incorporated Specifications. QTY: 1 Unit of Issue: LO Specifications Purpose The purpose of this acquisition is to obtain a Polatis Series 6000 Ultra Secure grade 8x8 All-Optical Switch, manufactured by Huber+Suhner. The switch will be used to route single and entangled photons around a quantum network testbed on the NIST campus and across the DC-region. The switch will be integrated into the existing infrastructure of the QN testbed at NIST and the infrastructure across the region. The network uses Polatis switches to manage the routing of quantum signals and a unique, NIST built Quantum Network Control Plane has been especially developed to manage this process. This control plane is written specifically for Polatis switches. For this reason, we require a BRAND NAME ONLY switch (manufacturer part number Polatis S-OST-08x08-LA1-HMHNS ) Minimum Requirements: The system shall meet or exceed the salient characteristics identified below. All items must be new.� Used or remanufactured equipment will not be considered for award. Experimental, prototype, or custom items will not be considered.� The use of �gray market� components not authorized for sale in the U.S. by the proposer is not acceptable. ��All line items shall be shipped in the original manufacturer�s packaging and include all original documentation and software, when applicable. The Contractor shall provide a Firm Fixed Price Quotation for the following CLINS. Contract Line Item 0001: Polatis S-OST-08x08-LA1-HMHNS Optical Switch, quantity one (1), in accordance with the specification requirements identified in the following: Part Number Quantity Description S-OST-08x08-LA1-HMHNS 1 Polatis Series 6000 Ultra Secure grade 8x8 Switch The product shall be a Polatis Series 6000 Ultra Secure grade 8x8 Switch meeting the following specifications: SMF28 Optical Matrix Switch configured in a 1U high Rack-mount Tray 08 Input ports and 08 Output ports (i.e. 8x8 switch), LC/APC connectors Hot Swap Twin Gigabit Ethernet & serial comms Multiprotocol (TL1,SNMP,SCPI,SDN) & secure web GUI control interface Hot swap dual 100/240VAC power �� Delivery: Delivery shall be FOB destination and shall occur within 30 days after contractor receipt of order. �FOB Destination means:� The contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for any loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery.� The contractor shall deliver all Line Items to: Delivery shall be made to the NIST Shipping and Receiving address identified below. The delivery will then be directed to the equipment�s final destination, also identified below. NIST Shipping & Receiving 100 Bureau Drive Building 301 Gaithersburg, MD 20899-0001 NIST Final Equipment Destination 100 Bureau Drive Building 220�� Gaithersburg, MD 20899-1640�� Inspection and Acceptance: In addition to the inspection and acceptance terms articulated in 52.212-4, the Government reserves the right to perform such performance tests and evaluations as defined below to verify specified system performance. Such tests and evaluations, if performed, shall be conducted within the environment that the system is to be operated. The Contractor has the right to be present during the tests and evaluations, if performed, at the Contractor�s expense. The scope of general inspection included: Structural, mechanical, and electrical evaluation of product An operational evaluation of the fiber attenuator Evaluation of the system�s performance and software interfacing A visual inspection of the fiber attenuator will be performed by the NIST TPOC to identify defects or any form of indication that the fiber attenuator was damaged during transport to NIST.� The Government shall have sole discretion to require repair or replacement of damaged and/or nonconforming supplies at no cost to the Government.� The Government at any time prior to acceptance shall reject the fiber attenuator due to defects and/or nonconformance.� The vendor is responsible for latent defects discovered any time after final inspection.� However, the extent of its liability shall be prorated over the useful life of the fiber attenuator. �The place of acceptance shall be: 100 Bureau Drive Building 220 Gaithersburg, MD 20899 Ownership (title) of the fiber attenuator shall transfer to NIST upon acceptance. Warranty The contractor shall warrant the entire system in accordance with the Original Equipment Manufacturer�s commercial item warranty terms and conditions, to include at minimum parts and labor for 12 months. Payment Schedule The Contractor shall be paid, in accordance with Net 30-day payment terms, upon receipt and acceptance of a proper invoice, in accordance with the following schedule: 100% after receipt and acceptance of fully delivered system. The Government anticipates inspection will occur upon: After the testing procedures set forth in this document have been complete NOTE:� Partial shipments and partial invoices will not be accepted, unless other-wise requested and accepted by the Contracting Officer prior to award offer. Proposed payment schedules shall be submitted with vendor�s response to the RFQ for consideration.� Provisions and Clauses: The following provisions and clauses apply to this acquisition and are hereby incorporated by reference. All FAR clauses may be viewed at�http://farsite.hill.af.mil/. FAR Provisions 52.204-7, System for Award Management 52.204-16, Commercial and Government Entity Code Reporting 52.204-17, Ownership or Control of Offeror (JUL 2016) 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations � Representation 52.225-25, Prohibition on Contracting with Entities Engaging in Sanctioned Activities Relating to Iran 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation 52.212-1 Instructions to Offerors - Commercial Items 52.212-3 Offeror Representations and Certifications-Commercial Items 52.204-20 Predecessor of Offeror (a) Definitions. As used in this provision� �Commercial and Government Entity (CAGE) code� means� (1) An identifier assigned to entities located in the United States and its outlying areas by the Defense Logistics Agency (DLA) Contractor and Government Entity (CAGE) Branch to identify a commercial or government entity, or (2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by NATO�s Support Agency (NSPA) to entities located outside the United States and its outlying areas that DLA Contractor and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as an NCAGE code. �Predecessor� means an entity that is replaced by a successor and includes any predecessors of the predecessor. �Successor� means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term �successor� does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances. (b) The Offeror represents that it ? is or ? is not a successor to a predecessor that held a Federal contract or grant within the last three years. (c) If the Offeror has indicated �is� in paragraph (b) of this provision, enter the following information for all predecessors that held a Federal contract or grant within the last three years (if more than one predecessor, list in reverse chronological order): Predecessor CAGE code: ________ (or mark �Unknown�) Predecessor legal name: _________________________ (Do not use a �doing business as� name) (End of provision) 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. (a) As required by sections 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that� (1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or (2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government. (b) The Offeror represents that� (1) It is ? is not ? a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and (2) It is ? is not ? a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. 52.212-2 Evaluation - Commercial Items (a)�� The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: An award will be made to the offeror whose quotation offers the best value to the Government price and other factors considered. The Government will evaluate quotations based on the following evaluation criteria: 1) Technical Capability 2) Past Performance, and 3) Price. All non-price factors, when combined, shall be equally important to price. (b) �� Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c)�� A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer`s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. 52.225-1 BUY AMERICAN--SUPPLIES (OCT 2022) (a) Definitions. As used in this clause - Commercially available off-the-shelf (COTS) item - (1) Means any item of supply (including construction material) that is - (i) A commercial product (as defined in paragraph (1) of the definition of ""commercial product"" at Federal Acquisition Regulation (FAR) 2.101; (ii) Sold in substantial quantities in the commercial marketplace; and (iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and (2) Does not include bulk cargo, as defined in 46 U.S.C.40102(4), such as agricultural products and petroleum products. Component means an article, material, or supply incorporated directly into an end product. Cost of components means - (1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or (2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product. Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105. Domestic end product means - (1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both- (i) An unmanufactured end product mined or produced in the United States; (ii) An end product manufactured in the United States, if- (A) The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029. Components of foreign origin of the same class or kind as those that the agency determines are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities of a satisfactory quality are treated as domestic. Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic; or (B) The end product is a COTS item; or (2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all the components used in the end product. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the end product and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the definition of ""cost of components"". End product means those articles, materials, and supplies to be acquired under the contract for public use. Fastener means a hardware device that mechanically joins or affixes two or more objects together. Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws. Foreign end product means an end product other than a domestic end product. Foreign iron and steel means iron or steel products not produced in the United States. Produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, from the initial melting stage through the application of coatings, except metallurgical processes involving refinement of steel additives. The origin of the elements of the iron or steel is not relevant to the determination of whether it is domestic or foreign. Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners. Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements. United States means the 50 States, the District of Columbia, and outlying areas. (b) 41 U.S.C. chapter 83, Buy American, provides a preference for domestic end products for supplies acquired for use in the United States. In accordance with 41 U.S.C. 1907, the domestic content test of the Buy American statute is waived for an end product that is a COTS item (see PAGE 5 OF 6 1333ND22QNB770542 12.505(a)(1)), except that for an end product that consists wholly or predominantly of iron or steel or a combination of both, the domestic content test is applied only to the iron and steel content of the end product, excluding COTS fasteners. (c) Offerors may obtain from the Contracting Officer a list of foreign articles that the Contracting Officer will treat as domestic for this contract. (d) The Contractor shall deliver only domestic end products except to the extent that it specified delivery of foreign end products in the provision of the solicitation entitled ""Buy American Certificate."" (End Of Clause) 52.252-1 Solicitation Provisions Incorporated by Reference. This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): Federal Acquisition Regulation (FAR): www.acquisition.gov/far/� Commerce Acquisition Regulation (CAR): http://www.ecfr.gov/cgi-bin/text-idx?SID=8b5f22b07c12a52e8b29841ad60f1fd9&mc=true&tpl=/ecfrbrowse/Title48/48chapter13.tpl� (End of provision) FAR Clauses � FAR 52.252-2 Clauses Incorporated by Reference. This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): Federal Acquisition Regulation (FAR): www.acquisition.gov/far/� Commerce Acquisition Regulation (CAR): http://www.ecfr.gov/cgi-bin/text-idx?SID=8b5f22b07c12a52e8b29841ad60f1fd9&mc=true&tpl=/ecfrbrowse/Title48/48chapter13.tpl � � 52.204-13 System for Award Management Maintenance 52.204-18, Commercial and Government Entity Code Maintenance 52.204-19, Incorporation by Reference of Representations and Certifications �52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment ��(a)�Definitions.�As used in this clause� ��Covered foreign country�means The People�s Republic of China. ��Covered telecommunications equipment or services�means� ��(1)�Telecommunications equipment produced by Huawei Technologies Company or ZTE Corporation (or any subsidiary or affiliate of such entities); ��(2)�For the purpose of public safety, security of Government facilities, physical security surveillance of critical infrastructure, and other national security purposes, video surveillance and telecommunications equipment produced by Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, or Dahua Technology Company (or any subsidiary or affiliate of such entities); ��(3)�Telecommunications or video surveillance services provided by such entities or using such equipment; or ��(4)�Telecommunications or video surveillance equipment or services produced or provided by an entity that the Secretary of Defense, in consultation with the Director of National Intelligence or the Director of the Federal Bureau of Investigation, reasonably believes to be an entity owned or controlled by, or otherwise connected to, the government of a covered foreign country. ��Critical technology�means� ��(1)�Defense articles or defense services included on the United States Munitions List set forth in the International Traffic in Arms Regulations under subchapter M of chapter I of title 22, Code of Federal Regulations; ��(2)�Items included on the Commerce Control List set forth in Supplement No. 1 to part 774 of the Export Administration Regulations under subchapter C of chapter VII of title 15, Code of Federal Regulations, and controlled- ��(i)�Pursuant to multilateral regimes, including for reasons relating to national security, chemical and biological weapons proliferation, nuclear nonproliferation, or missile technology; or ��(ii)�For reasons relating to regional stability or surreptitious listening; ��(3)�Specially designed and prepared nuclear equipment, parts and components, materials, software, and technology covered by part 810 of title 10, Code of Federal Regulations (relating to assistance to foreign atomic energy activities); ��(4)�Nuclear facilities, equipment, and material covered by part 110 of title 10, Code of Federal Regulations (relating to export and import of nuclear equipment and material); ��(5)�Select agents and toxins covered by part 331 of title 7, Code of Federal Regulations, part 121 of title 9 of such Code, or part 73 of title 42 of such Code; or ��(6)�Emerging and foundational technologies controlled pursuant to section 1758 of the Export Control Reform Act of 2018 (50 U.S.C. 4817). ��Substantial or essential component�means any component necessary for the proper function or performance of a piece of equipment, system, or service. ��(b)�Prohibition.�Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. The Contractor is prohibited from providing to the Government any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless an exception at paragraph (c) of this clause applies or the covered telecommunication equipment or services are covered by a waiver described in Federal Acquisition Regulation�4.2104. ��(c)�Exceptions.�This clause does not prohibit contractors from providing� ��(1)�A service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or ��(2)�Telecommunications equipment that cannot route or redirect user data traffic or permit visibility into any user data or packets that such equipment transmits or otherwise handles. ��(d)�Reporting requirement.� (1)�In the event the Contractor identifies covered telecommunications equipment or services used as a substantial or essential component of any system, or as critical technology as part of any system, during contract performance, or the Contractor is notified of such by a subcontractor at any tier or by any other source, the Contractor shall report the information in paragraph (d)(2) of this clause to the Contracting Officer, unless elsewhere in this contract are established procedures for reporting the information; in the case of the Department of Defense, the Contractor shall report to the website at�https://dibnet.dod.mil. For indefinite delivery contracts, the Contractor shall report to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order or, in the case of the Department of Defense, identify both the indefinite delivery contract and any affected orders in the report provided at�https://dibnet.dod.mil. ��(2)�The Contractor shall report the following information pursuant to paragraph (d)(1) of this clause ��(i)�Within one business day from the date of such identification or notification: the contract number; the order number(s), if applicable; supplier name; supplier unique entity identifier (if known); supplier Commercial and Government Entity (CAGE) code (if known); brand; model number (original equipment manufacturer number, manufacturer part number, or wholesaler number); item description; and any readily available information about mitigation actions undertaken or recommended. ��(ii)�Within 10 business days of submitting the information in paragraph (d)(2)(i) of this clause: any further available information about mitigation actions undertaken or recommended. In addition, the Contractor shall describe the efforts it undertook to prevent use or submission of covered telecommunications equipment or services, and any additional efforts that will be incorporated to prevent future use or submission of covered telecommunications equipment or services. ��(e)�Subcontracts.�The Contractor shall insert the substance of this clause, including this paragraph (e), in all subcontracts and other contractual instruments, including subcontracts for the acquisition of commercial items. (End of clause) 52.212-4 Contract Terms and Conditions�Commercial Items 52.232-39 Unenforceability of Unauthorized Obligations 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Deviation Apr 2020) 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders�Commercial Items (JUL 2020)-- including subparagraphs: 52.204-10 - Reporting Executive Compensation and First-Tier Subcontract Awards 52.222-3 - Convict Labor 52.222-19 - Child Labor - Cooperation with Authorities and Remedies; 52.222-21 - Prohibition of Segregated Facilities 52.222-36 - Equal Opportunity for Workers with Disabilities 52.222-37 - Employment Reports on Veterans 52.222-50 - Combating Trafficking in Persons 52.223-18 - Encouraging Contractor Policies to Ban Text Messaging While Driving 52.232-33 - Payment by Electronic Funds Transfer- System for Award Management (End of clause) Department of Commerce Acquisition Regulation (CAR) clauses. Please view the full text of these clauses at http://www.ecfr.gov/cgi-bin/text-idx?SID=8b5f22b07c12a52e8b29841ad60f1fd9&mc=true&tpl=/ecfrbrowse/Title48/48chapter13.tpl. Commerce Acquisition Regulations (CAR) Provisions and Clauses: CAR Provisions CAR 1352.233-70 Agency Protests (a) An agency protest may be filed with either: (1) the contracting officer, or (2) at a level above the contracting officer, with the appropriate agency Protest Decision Authority. See 64 Fed. Reg. 16,651 (April 6, 1999) (b) Agency protests filed with the Contracting Officer shall be sent to the following address: NIST/ACQUISITION MANAGEMENT DIVISION ATTN: KEITH BUBAR, CONTRACTING OFFICER 100 Bureau Drive, MS 1640 Gaithersburg, MD 20899 (c) Agency protests filed with the agency Protest Decision Authority shall be sent to the following address: NIST/ACQUISITION MANAGEMENT DIVISION ATTN: HEAD OF THE CONTRACTING OFFICE (HCO) 100 Bureau Drive, MS 1640 Gaithersburg, MD 20899 (d) A complete copy of all agency protests, including all attachments, shall be served upon the Contract Law Division of the Office of the General Counsel within one day of filing a protest with either the Contracting Officer or the Protest Decision Authority. (e) Service upon the Contract Law Division shall be made as follows: U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893, Herbert C. Hoover Building 14th Street and Constitution Avenue, N.W. Washington, D.C. 20230. FAX: (202) 482-5858 CAR 1352.233-71 GAO and Court of Federal Claims Protests (a) A protest may be filed with either the Government Accountability Office (GAO) or the Court of Federal Claims unless an agency protest has been filed. (b) A complete copy of all GAO or Court of Federal Claims protests, including all attachments, shall be served upon (i) the Contracting Officer, and (ii) the Contract Law Division of the Office of the General Counsel, within one day of filing a protest with either GAO or the Court of Federal Claims. (c) Service upon the Contract Law Division shall be made as follows: U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue, N.W. Washington, D.C. 20230. FAX: (202) 482-5858 � CAR Clauses 1352.201-70 Contracting Officer�s Authority 1352.209-73 Compliance with The Laws 1352.209-74 Organizational Conflict of Interest NIST Local Clauses NIST LOCAL-53 Contract Performance During Changes in NIST Operating Status Unless otherwise stated in the contract terms and conditions, normal days of business operation are Monday through Friday, excluding Federal Holidays. However, throughout the contract period of perf...
Web Link: SAM.gov Permalink
(https://sam.gov/opp/659bb16a04304fd0b50b368ae149dbd4/view)
Place of Performance: Address: Gaithersburg, MD 20899, USA; Zip Code: 20899; Country: USA
Record: SN06533063-F 20221203/221201230106 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

66 -- Procurement of a Polatis Switch