SOURCES SOUGHT
99 -- ARMOR,TRANSPARENT,V
- Notice Date
- 12/29/2022 12:42:27 PM
- Notice Type
- Sources Sought
- NAICS
- 336992
— Military Armored Vehicle, Tank, and Tank Component Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7L123R0018
- Response Due
- 1/13/2023 2:00:00 PM
- Point of Contact
- Christopher Drake 614-542-9937, Phone: 614-542-9937, Emelie Deslauriers 614-692-3913, Phone: 614-692-3913
- E-Mail Address
-
Christopher.Drake@dla.mil, Emelie.Deslauriers@dla.mil
(Christopher.Drake@dla.mil, Emelie.Deslauriers@dla.mil)
- Description
- This SOURCES SOUGHT notice is for informational and planning purposes only and shall not be construed as a solicitation or as an obligation or commitment by the Government. This notice is intended strictly for market research. This is NOT a solicitation for proposals, proposal abstracts, or quotations. No solicitation exists at this time. The purpose of this notice is to obtain information regarding the availability and capability of qualified businesses that are capable of executing this potential contract. The Government is not obligated and will not pay for any information received from potential sources as a result of this notice. Your response to the information requested will assist the Government in determining the appropriate acquisition method. Sources interested in providing an offer on this solicitation should complete the attached market survey and return the completed copy to the Contract Specialist via email.� DLA Land and Maritime is preparing to solicit a large purchase for NSN 2541-01-560-1159 for listed in the attached market survey.� This acquisition is for supplies for which the Government does possess complete and unrestrictive technical data, therefore the Government intends to solicit and contract with Full and Open Competition under the authority FAR 6.102. The drawings for NSN 2541-01-560-1159 are listed below. NSN 2541-01-560-1159 requires Contractor First Article Testing and Contractor Production Control Testing. There are no waived sources. Alternate sealants shall only be considered if supporting documentation demonstrates an 'equal to or better' standard than approved sealants. For 'equal to or better than' standards, the contractor shall demonstrate that no delamination, cracking, chemical reaction, or other adverse event occurs because of sealant type over a temperature range of -50F to 120F over a five-year accelerated life with simulated thermal cycling at the assembly level. The contractor�s procedure for thermal cycling shall require PCO approval to be considered relevant. In addition to thermal cycling, the sealant shall show that it has cured properly in the assembly.� Note: Approved sealants will be shared with all offers. This item has technical data some or all of which is subject to export-control regulations.� Distribution of the technical data and eligibility for award are limited to those suppliers qualified through JCP Certification, or to those licensed by either the Department of State or Commerce; or to foreign suppliers pursuant to international agreements. This NSN contains one or more components which mush meet QPL/QML specifications. A classified drawing forms a part of this data package and will be supplied upon award following receipt of completed DD Form 254 from the Contracting Officer. Approved Drawings: IAW BASIC DRAWING NR 19207 12615030 REVISION NR A�� DTD 06/25/2021 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12369001 REVISION NR D�� DTD 05/14/2007 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 DTA184044 REVISION NR���� DTD 11/03/2005 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 ATPD-2352 REVISION NR T�� DTD 05/08/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12615030-1 REVISION NR���� DTD 02/04/2021 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 ABRIDGE-SCG-CSCSS REVISION NR���� DTD 08/31/2012 PART PIECE NUMBER: IAW REFERENCE QAP 16236 CDRL-TA-FAT-PCT-COQC REVISION NR���� DTD 10/19/2022 PART PIECE NUMBER: IAW REFERENCE QAP 16236 SQAP-ATPD2352-PCT REVISION NR���� DTD 04/09/2019 PART PIECE NUMBER: IAW REFERENCE QAP 16236 SQAP-ATPD2352-FAT REVISION NR���� DTD 04/09/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12585043 REVISION NR���� DTD 08/01/2018 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12615030-1 REVISION NR B�� DTD 06/11/2020 PART PIECE NUMBER:
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/45a36b919e9a4e8595c17b3442897537/view)
- Record
- SN06554008-F 20221231/221229230112 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |