SOLICITATION NOTICE
66 -- Maintenance Contract Iquitos
- Notice Date
- 1/12/2023 12:29:05 PM
- Notice Type
- Solicitation
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- NAVAL MEDICAL RESEARCH CENTER SILVER SPRING MD 20910-7500 USA
- ZIP Code
- 20910-7500
- Solicitation Number
- 1301053629
- Response Due
- 1/26/2023 9:00:00 AM
- Archive Date
- 02/10/2023
- Point of Contact
- Genaro Vasquez, Phone: 011-511-624-4128
- E-Mail Address
-
genaro.m.vasquez.ln@health.mil
(genaro.m.vasquez.ln@health.mil)
- Description
- STATEMENT OF WORK US Naval Medical Research Unit 6 Laboratory Assessment / Laboratory Unit Environmental Monitoring System � Iquitos Site Maintenance and Support Contract Purpose The purpose of this Contract is to engage in the annual validation, calibration, maintenance and support services of Rees Scientific Corporation to ensure that our critical Temperature and Environmental Laboratory Monitoring System in NAMRU-6 Iquitos Facilities is fully operational.� This service provides vital protection of invaluable research and sample specimens collected from research studies being conducted by NAMRU-6.� The work to maintain this system is required since its installation and deployment in 2022, and should be performed by the manufacturer, Rees Scientific Corporation (RSC), or an authorized company. Background The procurement for a maintenance agreement ensures that the vendor makes annual scheduled checks of the system, performs validation and calibration protocols, & updates the computer system software as needed to maintain its Authorization-to-Operate (ATO) condition as required by DOD network regulations.� It also provides 24/7/365 tech support, and issues a service technician should the system require repair. Tasks Task 1: Perform annual validation, calibration, and preventive maintenance of existing system setup (37 sensors), to include inputs, sensors, wireless devices, and software/hardware of the system ONSITE.� The contractor shall review and check all system panels and ports. Maintenance shall include software updates, annual measurements of system functionality and connection status. Provide alarm alerts and means of obtaining graphical reports and all other needs commonly associated with environmental management. Task 2:� Provide 24/7/365 technical support and part replacement of the equipment associated with the system and software. During an emergency, the RSC technician(s) will provide online phone support to correct the system. If an onsite visit is needed to return the system to fully operational state, vendor must quote for the site visit and get official approval in written, prior to make travel arrangements. No ONSITE visit is authorized for corrective maintenance as it is not included in this contract. Task 3: Vendor shall perform an annual Installation Qualification/Operational Qualification test of the monitoring and alarm system onsite, in NAMRU-6 in Iquitos, Peru.� All system inputs will be verified and calibrated. Task 4: Vendor will provide all necessary labor and materials for the complete maintenance service of the environmental monitoring system. Service includes at least one site visit to wire, install, program, configure, validate, and train users on the system. Vendor will provide battery backups to the probes/sensors to ensure they continue monitoring all time. Conditions Vendor must provide proof from Rees Scientific Corporation that it has legal access to RSC software ATO licenses and must be supplied during service and upgrades.� Vendor must also supply only new hardware components/modules.� Annual maintenance must also include the latest software release from RSC at the time of validation.� �No exceptions will be accepted�. Services to include: Annual On-Site IQ/OQ Validation Current Software Validation Manual Software updates to current version Calibration of all temperature & humidity sensors with NIST traceable device On-Site training at the time of validation 24/7/365 telephone technical support Onsite service that includes new parts and labor for annual preventive maintenance Does not include onsite service for corrective maintenance Vendor will only initiate travel to the site after receiving written (electronic-email) confirmation from a government representative at the facility that all access permissions have been granted and coordination has been made. Installation qualification and validation must be thoroughly performed by vendor in accordance with FDA and AABB validation requirements. Records must be made available for storage in Laboratory once system installed. Contract runs from the moment of acceptance of this contract, not from the moment of purchase of the system, nor the moment of expiration of any previous maintenance contract or warranty. Qualifications of Vendor�s Personnel All installation personnel shall be fully qualified by the manufacturer (Rees Scientific) to install or work on systems of this type, and must be either employees of the system manufacturer, or have completed a manufacturer administered training program.� The contractor shall provide prove of this requirement.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/c1f03fda5a864d32a393af9deff2e5b3/view)
- Place of Performance
- Address: PER
- Country: PER
- Country: PER
- Record
- SN06563332-F 20230114/230112230111 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |