SAMDaily.us | SRCSGT | 66 | Signal Analyzer

SAMDAILY.US - ISSUE OF MARCH 23, 2023 SAM #7786
SOURCES SOUGHT

66 -- Signal Analyzer

Notice Date: 3/21/2023 9:35:01 AM
Notice Type: Sources Sought
NAICS: 334515 — Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
Contracting Office: W6QK LAD CONTR OFF CHAMBERSBURG PA 17201-4150 USA
ZIP Code: 17201-4150
Solicitation Number: W25G1Q3052015Y
Response Due: 3/24/2023 1:00:00 PM
Point of Contact: Tammy Little
E-Mail Address: tammy.r.little.civ@army.mil
(tammy.r.little.civ@army.mil)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: This is a sources sought request seeking Small Businesses capable of providing the forllowing requirement.� SIGNAL ANALYZER PURCHASE DESCRIPTION 1.� GOVERNMENT NEEDS:� A signal analyzer as described in this purchase description. 2.� SPECIFICATIONS:� The following specifications detail the basic characteristics of the signal analyzer: 2.1� GENERAL SPECIFICATONS 2.1.1.� Power Requirements: Voltage and frequency 100 to 120 V, 50/60/400 Hz 2.1.2.� Display - Resolution: 1280 x 800 minimum, Capacitive multi-touch screen - Size: 10.6 inch diagonal nominal 2.1.3.� Data Storage: 160 GB nominal (removable solid state drive) 2.1.4.� Dimensions (maximum); H: 7.5 inch x W: 17 inch x L: 15 inch 2.2� FREQUENCY AND TIME SPECIFICATIONS 2.2.1.� Frequency Range:� DC coupled: 10 Hz to 44 GHz; AC coupled: 10 MHz to 44 GHz 2.2.2.� Aging Rate:� � 1 x 10�6 / year 2.2.3.: Temperature Stability: 20 to 30 �C �� 2 x 10�6 Full Temperature Range�� 2 x 10�6 2.2.4.� Achievable Initial Calibration Accuracy: � 1.4 x 10�6 2.2.5� Trigger:� Free run, line, video, external 1, external 1, RF burst, periodic timer 2.2.6 Resolution Bandwidth �� Range (�3.01 dB bandwidth) 1 Hz to 10 MHz (10 % steps), 4, 5, 6, 8, 10 MHz Bandwidth Accuracy (power) 1 Hz to 750 kHz � 1.0 % (� 0.044 dB) nominal 820 kHz to 1.2 MHz (< 3.6 GHz CF) � 2.0 % (� 0.088 dB) nominal 1.3 to 2.0 MHz (< 3.6 GHz CF) � 0.07 dB nominal 2.2 to 3 MHz (< 3.6 GHz CF) 0 to -0.2 dB nominal 4 to 10 MHz (< 3.6 GHz CF) 0 to -0.4 dB nominal � 2.2.7.� Analysis Bandwidth:� Maximum bandwidth � 85 MHz 2.2.8.� Video Bandwidth Range - Same as Resolution Bandwidth range plus wide-open VBW (labeled 50 MHz) �� 2.3� AMPLITUDE ACCURACY AND RANGE SPECIFICATIONS 2.3.1.� Amplitude Range � Preamp on/off � Displayed Average Noise Level to +30 dBm 2.3.2.� Input Attenuator Range � 0 � 70 dB in 2 dB steps 2.3.3.� Maximum Safe Input Level Average Total Power +30 dBm (1 W) Peak Pulse Power +50 dBm (100 W) 2.3.4.� DC Volts:� AC coupled - � 100 Vdc; DC coupled - � .2 Vdc 2.3.5� Frequency Response Maximum error relative to reference condition (50 MHz) 20 to 30 �C Full range 95th percentile (? 2s) 20 Hz to 10 MHz � 0.6 dB � 0.8 dB � 0.28 dB 10 MHz to 50 MHz � 0.45 dB � 0.57 dB � 0.21 dB 50MHz to 3.6 GHz � 0.45 dB � 0.70 dB � 0.20 dB 3.6 to 5.2 GHz � 1.7 dB � 3.5 dB � 0.67 dB 5.2 to 8.4 GHz � 1.5 dB � 2.7 dB � 0.47 dB 8.4 to 13.6 GHz � 2.0 dB � 2.7 dB � 0.47 dB 13.6 to 17.1 GHz � 2.0 dB � 2.7 dB � 0.52 dB 17.1 to 22.0 GHz � 2.0 dB � 3.5 dB � 0.66 dB 22.0 to 26.5 GHz � 2.5 dB � 3.7 dB � 0.79 dB 26.5 to 34.5 GHz � 2.5 dB � 3.5 dB � 1.07 dB 34.4 to 44 GHz � 3.2 dB � 4.9 dB � 1.4 dB 2.4� DYNAMIC RANGE SPECIFICATIONS 2.4.1.� Gain Compression 1 dB gain compression (two-tone) 20 to 500 MHz +3 dBm (typical) 500 MHz to 3.6 GHz +5 dBm (typical) 3.6 to 26.5 GHz +4 dBm (typical) 26.5 to 44 GHz 0 dBm (nominal) 2.4.2.� Displayed average noise level (DANL) - Input terminated, sample or average detector, averaging type = Log, 0 dB input attenuation, IF Gain = High, 20 to 30 �C Full range Typical 10 Hz �95 dBm (nominal) 20 Hz �105 dBm (nominal) 100 Hz �110 dBm (nominal) 9 kHz to 1 MHz �120 dBm (nominal) 1 MHz to 1.2 GHz �135 dBm 1.2 to 2.1 GHz �154 dBm �152 dBm �155 dBm 2.1 to 3.6 GHz �152 dBm �151 dBm �154 dBm 3.6 to 4.2 GHz �144 dBm �142 dBm �147 dBm 4.2 to 6.6 GHz �146 dBm �144 dBm �149 dBm 6.6 to 8.4 GHz �148 dBm �146 dBm �150 dBm 8.4 to 13.6 GHz �148 dBm �146 dBm �150 dBm 13.6 to 20 GHz �145 dBm �143 dBm �148 dBm 20 to 26.5 GHz �142 dBm �140 dBm �145 dBm 26.5 to 34 GHz �140 dBm �138 dBm �144 dBm 34 to 40 GHz �136 dBm �133 dBm �140 dBm 40 to 44 GHz �135 dBm �132 dBm �140 dBm 2.5� INPUTS AND OUTPUTS 2.5.1� Front panel RF input Connector: 2.4mm, 50 ? (nominal) 2.5.2� Rear Panel 10 MHz out � Connector � Output amplitude � Frequency BNC female, 50 ? (nominal) ? 0 dBm (nominal) 10 MHz � (10 MHz x frequency reference accuracy) Ext Ref In � Connector � Input amplitude range � Input frequency � Frequency lock range BNC female, 50 ? (nominal) �5 to 10 dBm (nominal) 1 to 50 MHz (nominal) � 2 x 10�6 of ideal external reference input frequency Trigger 1 / 2 inputs Connector Impedance Trigger level range BNC female 10 k? nominal �5 to +5 V Trigger 1 / 2 outputs Connector Impedance Level BNC female 50 ? nominal 0 to 5 V (CMOS) USB ports compatible with USB 3.0 2.6� I/Q ANALYZER 2.6.1.� Frequency span � 10 Hz to 85 MHz 2.6.2� Resolution Bandwidth Range Overall 100 mHz to 3 MHz Span = 1 MHz 50 Hz to 1 MHz Span = 10 kHz 1 Hz to 10 kHz Span = 100 Hz 100 mHz to 100 Hz 2.6.3� Data acquisition (standard 10 MHz IF path) Time record length (minimum) 4,000,000 IQ sample pairs Sample rate (minimum) 100 MSa/s ADC resolution (minimum) 12 Bits 2.7� Preamplifier 2.7.1� Gain 100 kHz to 3.6 GHz +20 dB (nominal) 3.6 to 26.5 GHz +35 dB (nominal) 26.5 to 44 GHz +40 dB (nominal) 2.7.2� Noise Figure 100 kHz to 3.6 GHz 11 dB (nominal) 3.6 to 8.4 GHz 9 dB (nominal) 8.4 to 26.5 GHz 10 dB (nominal) 26.5 to 44 GHz DANL + 176.24 dB (nominal) 3. CALIBRATION� - An ANSI Z540-1-1994 calibration/certificate shall be provided with the unit. 4. �INFORMATION ASSURANCE REQUIREMENTS: This system will operate in stand-alone mode only (no network connection of any kind).� If there becomes such a time where this system requires the use of another PC (laptop, tablet, etc.) or network connection it will conform to all requisite DoD and Army cybersecurity requirements.� Additionally, since this system operates in stand-alone mode there will be no ability to connect via either wireless (e.g Bluetooth) or wired (e.g. Ethernet cable), to a network.� If these parameters change then the system will be subject to Change Configuration Board (CCB) approval for operation. 5.� WARRANTY:� A one year minimum warranty shall be furnished with the provided equipment.� The warranty shall cover all components.� The warranty period begins when the LEAD Contracting Officer provides official confirmation that the equipment has satisfied all operational provisions of the contract. 6.� PRESERVATION, PACKAGING AND DELIVERY: The contractor shall utilize standard commercial methods for preservation and packaging appropriate for the provided equipment and acceptable to commercial carriers. As a minimum, all areas susceptible to damage from exposure to the elements shall be preserved and/or packed to prevent damage.� The contractor shall be responsible for ensuring the equipment is delivered to LEAD in good condition. 7.� INSPECTION AND ACCEPTANCE:� The provided equipment shall be examined for design, construction, materials, components, and workmanship to determine compliance with the contract and this specification.� Any deviation from these requirements shall be cause for rejection.
Web Link: SAM.gov Permalink
(https://sam.gov/opp/317d4d238c094e0ba95b752d4b6b1f5e/view)
Place of Performance: Address: USA; Country: USA
Record: SN06625878-F 20230323/230321230111 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

66 -- Signal Analyzer