SOURCES SOUGHT
H -- Sand Table for ERDC-CERL
- Notice Date
- 4/11/2023 7:14:05 AM
- Notice Type
- Sources Sought
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- W2R2 CONST ENGRG LAB CHAMPAIGN IL 61822-1072 USA
- ZIP Code
- 61822-1072
- Solicitation Number
- W9132T23R0VVD
- Response Due
- 4/17/2023 12:00:00 PM
- Point of Contact
- Christine L. Wilson, Bill Rawe
- E-Mail Address
-
Christine.L.Wilson@usace.army.mil, William.T.Rawe@usace.army.mil
(Christine.L.Wilson@usace.army.mil, William.T.Rawe@usace.army.mil)
- Description
- Sources Sought Notice Identification Number: W9132T23R0VVD This is a Sources Sought Notice and is for market research purposes only. THIS IS NOT A REQUEST FOR PROPOSAL, QUOTATION OR BID.� NO SOLICITATION IS CURRENTLY AVAILABLE. The U.S. Army Corps of Engineers, Engineer Research and Development Center is conducting market research to identify sources (Small Businesses and Other-than-Small Businesses) that have the knowledge, skills and capability to provide the equipment described below. The responses to this sources sought announcement will be used by the Government to make appropriate acquisition decisions for this project. Responses are to be sent via email to chl-ct-quotes@usace.army.mil no later than 2:00 p.m. CDT, 17 April 2023.� Questions or concerns surrounding small business matters can be sent to kimberly.l.dulaney@usace.army.mil.� Please include the Sources Sought Notice Identification Number in the Subject line of the email submission. Project Description (Estimated quantities): The Government requires one (1) Emriver Em4 Geomodel, or equal, standard sand table model, remotely controlled with digital flow controller capable of programming and tracking of flow rates and volumes.� The sand table must be equipped with: A static base comprised of at a minimum of 3mm welded sheet aluminum, with a 12�x4� (approximately 3.7m x 1.2m) working area, and minimum depth of at least 146mm.� Upper rim reinforced with double-slot T-slot extrusion to facilitate attachment of instruments and accessories. Bottom of the sand table box shall be reinforced with a large aluminum square tube to minimize loading deflection. A rack and pinion standpipe system, comprised of polycarbonate, 102 mm minimum, running in a precision shaft seal. At least two (2) folding aluminum supports.� A minimum of two (2) 50-gallon reservoirs, made of polypropylene and equipped with a sealed, submersible pump.� The submersible pump shall have an intake filter and be capable of delivering, at a minimum, 500 gph (1,892 Lph). Power supply for the pump shall be 12-volt, 2.0 amp service equipped with a ground fault circuit (GFC) interrupter, with input standard of 115-volt 60 Hz. System shall be either 110v or 210v. Operation manual and standard commercial warranty are to be provided. System must be self-supported, stand-alone, and mobile (portable using integrated wheels), able to handle at a minimum, four ground thermoset plastic sand types. At a minimum, 360 pounds of thermoset plastic sand in four (4) colors.� Average particle size for each of the plastic sands must be; yellow 1.4 mm, white 1.0 mm, black 0.7 mm, and red 0.4 mm.� System must come with a series of 3D simulated structures such as culverts or bridges that can be incorporated into the demonstration bed to provide visualization of flow events. Basis of Award: Award is based upon the Lowest Price Technically Acceptable evaluation. Service Location: Engineering Research and Development Center (ERDC), Construction Engineering Research Laboratory (CERL), 2902 Newmark Drive, Champaign, IL 61822. Submission Details: All interested, capable, qualified (under NAICS code 334516) and responsive contractors are encouraged to reply to this market survey request. Interested PRIME CONTRACTORS ONLY should submit a narrative demonstrating equipment of similar nature in specification as described above. Narratives shall be no longer than 10 pages. Email responses are required. Please include the following information in your response/narrative: Company name, address, and point of contact, with (h)er/is phone number and email address Business size to include any official teaming arrangements as a partnership or joint venture Details of similar projects and state whether you were the Prime or Subcontractor Approximate Lead Time to Delivery Project references (including owner with phone number and email address) Approximate Equipment cost (ROM) Comments will be shared with the Government and the project management team, but otherwise will be held in strict confidence. Telephone inquiries will NOT be accepted.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/d286a5a65e2b46ed8cc2ca171d897c18/view)
- Place of Performance
- Address: Champaign, IL 61822, USA
- Zip Code: 61822
- Country: USA
- Zip Code: 61822
- Record
- SN06647466-F 20230413/230411230112 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |