Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF JUNE 17, 2023 SAM #7872
SOLICITATION NOTICE

66 -- NOTICE OF INTENT TO SOLE SOURCE � One (1) High Voltage Hybrid Active Load Pull (HVHALP) System

Notice Date

6/15/2023 8:29:10 AM
 

Notice Type

Presolicitation
 

NAICS

334515 — Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
 

Contracting Office

W6QK ACC-APG ADELPHI ADELPHI MD 20783-1197 USA
 

ZIP Code

20783-1197
 

Solicitation Number

W911QX23Q0128
 

Response Due

7/6/2023 8:59:00 AM
 

Archive Date

07/21/2023
 

Point of Contact

Deneise Jackson, Phone: 3013945351, Jessica R. Camunez, Phone: 5756788283
 

E-Mail Address

deneise.c.jackson.civ@army.mil, jessica.r.camunez.civ@army.mil
(deneise.c.jackson.civ@army.mil, jessica.r.camunez.civ@army.mil)
 

Description

The United States Government intends to solicit and negotiate with only one source under the authority of 41 U.S.C. 1901(e)(2), implemented by FAR 13.501(a) -- Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements based on the requirement for the system to be modular in design to allow for future upgrades and the system must meet the following four (4) critical requirements: The system must be able to resolve currents in the milliamperes (Ma) ranges. Diamond substrates are in their early stage of development, and, as such, are very small in size. Therefore, small, and low current devices are needed to maximize the substrate space. A critical element of diamond surface device technology is the two-dimensional holes gas, which is at the surface of the device, typically called the channel. The behavior of the channel as a function of the input power is imperative to developing this technology. To this end, the HVHALP system shall demonstrate the ability to record and display both the instantaneous voltage and current at the input and output of the devices. For power output performance characterization, the system must be able to pulse currents and voltages with negative and positive voltages that have a magnitude of at least 400V while maintaining Ma current resolution. For surface characterization, the system must be able to synchronize in both continuous and pulsed conditions, the application of Radio Frequency signal and Direct Current (DC) bias. The Government intends to solicit and negotiate with Focus Microwaves Inc. (Focus Micro Ondes Inc.), 4555 Chemin du Bois-Franc Saint-Laurent, Quebec, H4S 1A8 Canada, for one (1) HVHALP System. Focus Microwaves Inc. is a Canadian-owned entity, operating in the U.S. and is the only manufacturer that can meet the Governments minimum requirement for a High Voltage Hybrid Active Load Pull system. This notice of intent is not a request for competitive proposals. However, this notice does function as a Request for Information (RFI) for offeror�s who believe they can meet the Government�s requirement (see Section 9 below). Any responsible source who believes it is capable of meeting the requirement may submit a capability statement, proposal, or quotation, which shall be considered by the agency, only if received by the closing date and time of this notice. �A determination not to compete the proposed requirement based upon the responses to this notice is solely within the discretion of the Government.� Responses to this notice are due no later than (NLT) than 15 Days After Posting by email at deneise.c.jackson.civ@army.mil. Point of Contact for this notice is Deneise Jackson, (301) 394-5351, deneise.c.jackson.civ@army.mil
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/7dfa3cea1a804efe997a9157904b1d36/view)
 

Place of Performance

Address: Adelphi, MD 20783, USA

Zip Code: 20783

Country: USA
 

Record

SN06718020-F 20230617/230616060715 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |