SOURCES SOUGHT
95 -- Copper Cladded Stainless Steel
- Notice Date
- 8/31/2023 7:08:19 AM
- Notice Type
- Sources Sought
- NAICS
- 331420
— Copper Rolling, Drawing, Extruding, and Alloying
- Contracting Office
- BROOKHAVEN NATL LAB -DOE CONTRACTOR Upton NY 11973 USA
- ZIP Code
- 11973
- Solicitation Number
- 08312023
- Response Due
- 9/15/2023 1:00:00 PM
- Archive Date
- 09/30/2023
- Point of Contact
- William Koncelik, Phone: 6313445281
- E-Mail Address
-
wkoncelik@bnl.gov
(wkoncelik@bnl.gov)
- Description
- BSA is looking to identify suppliers who can manufacture copper cladded stainless-steel laminated coil. This process of mechanically joining dissimilar metals is known as cold-rolled cladding/Roll Bonding. Section 1 - Co-laminated Material The final width, thickness and tolerances of the copper clad stainless-steel material shall be as shown in the technical requirements below. Technical Requirements: � A continuous forming process shall be used. Care shall be taken not to damage the copper layer. � Electrical resistivity of the copper layer shall have a (RRR ? 50) � Stainless steel thickness 0.92 �0.02 mm � Copper thickness 0.08 �0.02 mm � Total thickness tolerance 1.0 �0.03 mm � Co-laminated strip width 203.2 �0.03 mm � Total length of clad material 4.3 km � Stainless steel elongation at break > 40 % (after annealing) � Roughness Average (Ra) stainless steel ? 0.8 ?m (free from fingerprints) � Ra copper ? 0.2 ?m (free from fingerprints) � The maximum acceptable defect size in the copper layer is indicated in Table 1 below See Attachment A for further specifications and requirements.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/e5789c18630e4b9d88daf64cd0b4eaf3/view)
- Place of Performance
- Address: Upton, NY 11973, USA
- Zip Code: 11973
- Country: USA
- Zip Code: 11973
- Record
- SN06816007-F 20230902/230831230107 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |