Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF FEBRUARY 16, 2024 SAM #8116
SOLICITATION NOTICE

34 -- Composite Vertical Bandsaw

Notice Date

2/14/2024 11:35:13 AM
 

Notice Type

Presolicitation
 

NAICS

332216 — Saw Blade and Handtool Manufacturing
 

Contracting Office

FA8125 AFSC PZIMA TINKER AFB OK 73145-3303 USA
 

ZIP Code

73145-3303
 

Solicitation Number

A23-007-01
 

Response Due

2/16/2023 10:00:00 AM
 

Archive Date

03/03/2023
 

Point of Contact

Sheridan Robison
 

E-Mail Address

sheridan.robison@us.af.mil
(sheridan.robison@us.af.mil)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Description

The Air Force intends to solicit the following supply: The 76 AMXG/568 AMXS is requesting utilization of funds for the purchase of a vertical bandsaw. The requested equipment item descriptions/specifications are Brand Name or equal to a DoALL Model 2013-V3 bandsaw. The requirements to be considered equal are outlined below. a. Item Number 1 � One (1) DoALL Brand Model 2013-V3 Composite Vertical Bandsaw 1) Shall be a commercial off the shelf (COTS) item. 2) Shall have a maximum power requirement of 208V/30A/3-phase. 3) Shall have variable cutting speeds capable of a minimum of Surface Feet Per Minute (SFPM) to a maximum of at least 5,000 SFPM and controls. 4) Throat capacity: at least 20"" 5) Cutting Height Capacity: 12�-14� 6) Blade width: 1/8""-1"" 7) Table Height from Floor: 38""-46� 8) Footprint maximum: 72� L x 48� W x 84� H 9) Table Tilt (deg.) maximum: At least 10 positive and at least 45 negative. 10) Table size minimum: 14� x 14� 11) Shall include standard miter gauge. 12) Shall include Blade Guard and Tension control device IAW OSHA 1910.213 13) Shall include Work Light 14) Shall include indicator for blade speeds in feet per minute. 15) Shall include Emergency Stop Button, Blade Start Button, and Blade Stop Button 16) Shall include Vacuum for removal of dust. 17) Shall include compatible 60-80 grit Continuous Diamond Edge, or 70-100 grit Continuous Remington Tungsten Carbide Band Saw Blade 18) Shall deliver to Tinker AFB fully assembled with operator�s manual. A Firm Fixed Price type contract is contemplated. Estimated Period of Performance: �60 days ARO This is a small business set-aside System for Award Management (SAM) is required to receive any award. Contractors can register electronically at https://www.sam.gov/portal/public/SAM/. The NAICS code for this requirement is 332216 with a size standard of 750 EMP. Interested persons may identify their interest and capability to respond to the requirement by submitting a proposal. Electronic procedures will be used for this solicitation through Beta.sam.gov at https://sam.gov/content/home.� No telephone requests. See Note 22. Authority is 10 USC 2304 (c)(1). For further information contact: Sheridan Robison Contracting Officer Sheridan.robison@us.af.mil
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/82d184efda5040aaaeb309f7651091a6/view)
 

Place of Performance

Address: Tinker AFB, OK 73145, USA

Zip Code: 73145

Country: USA
 

Record

SN06965966-F 20240216/240214230054 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |