SOURCES SOUGHT
65 -- Metal Carts and Peg Boards
- Notice Date
- 3/7/2024 3:29:57 PM
- Notice Type
- Sources Sought
- NAICS
- 339112
— Surgical and Medical Instrument Manufacturing
- Contracting Office
- 262-NETWORK CONTRACT OFFICE 22 (36C262) Gilbert AZ 85297 USA
- ZIP Code
- 85297
- Solicitation Number
- 36C26224Q0530
- Response Due
- 3/15/2024 12:00:00 PM
- Archive Date
- 04/14/2024
- Point of Contact
- ISRAEL GARCIA, CONTRACTING SPECIALIST, Phone: 562-826-8000
- E-Mail Address
-
israel.garcia2@va.gov
(israel.garcia2@va.gov)
- Awardee
- null
- Description
- THIS REQUEST FOR INFORMATION (RFI)/SOURCES SOUGHT/RFI IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES ONLY. THIS IS NOT A SOLICITATION. THE SUBMISSION OF PRICING, CAPABILITIES FOR PLANNING PURPOSES, AND OTHER MARKET INFORMATION IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI IN ACCORDANCE WITH (IAW) FAR 15.201(e). DISCLAIMER This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. SOURCES SOUGHT/RFI DESCRIPTION This is NOT a solicitation announcement. This is a Sources Sought/RFI/RFI only. The purpose of this Sources Sought/RFI/RFI is to gain knowledge of potential qualified sources and their size classification relative to NAICS 339112 (size standard of 1000 employees). Responses to this Sources Sought/RFI/RFI will be used by the Government to make appropriate acquisition decisions. After review of the responses to this Sources Sought/RFI, a solicitation announcement may be published. Responses to this Sources Sought/RFI synopsis are not considered adequate responses for a solicitation announcement. The Department of Veterans Affairs (VA), VISN 22 Long Beach Network Contracting Office, is seeking sources who can possibly provide several Distribution Systems International, Inc. (DSI) Custom Carts and Stainless Pegboard Cabinets that at a minimum meet the brand name and/or can possibly provide an equal product for the Northern Arizona VA Healthcare System. Located in Prescott, AZ. Brand name Information: Manufacturer: DSI Nomenclature: CUSTOM CART WITH 5 DRAWERS, DIVIDERS AND CASTERS WITH BRAKES 5 DRAWER CUSTOM CART WITH 6 DRAWERS, DIVIDERS AND CASTERS WITH BRAKES 6 DRAWER CUSTOM CART WITH 7 DRAWERS, DIVIDERS AND CASTERS WITH BRAKES 7 DRAWER CUSTOM CART WITH 3 PULL OUT SHELVES AND CASTERS WITH BRAKES ROLL OUT DRAWERS 3 DROPSHIP: 30X30X150 SS TOP FOR CABINETS DROPSHIP: CUSTOM: STAINLESS PEGBOARD CABINET, 78""H X 24""D X 40""W, (4) 5""H DRAWERS, GLASS DOORS, NO LOCK DROPSHIP: CUSTOM: SLOPE TOP FOR KITS D1-MODUCAB-PEGCAB/OPTA AND D1-MODUCAB-PEGCAB/OPTB DROPSHIP: CUSTOM: SET OF 50 PEGBOARD HOOKS FOR KITS D1-MODUCABPEGCAB/OPTA AND D1-MODUCAB-PEGCAB/OPTB DROPSHIP: CUSTOM: DRAWER DIVIDER SYSTEM FOR KIT D1-MODUCAB-PEGCAB/OPTA COMPLETE ONSITE ASSEMBLY AND INSTALLATION Model Number: KIT-L1-CUSTOM-KIT KIT-L1-CUSTOM-KIT KIT-L1-CUSTOM-KIT KIT-L1-CUSTOM-KIT L1-SS-30X30X150 G1-56110-01 G1-56110-03 G1-56110-07 G1-56110-04 KIT-D1-INSTALLATION (Any other information): Equal to product Information: Salient Characteristics L1-CUSTOM-KITS- Overall Cabinet Dimensions for all configurations 30 W x 27.75 D x 47.54 H Cabinets are of unitary design. Cabinet Housings are made of all steel construction utilizing commercial grade steel. Cabinets have four holes/knockouts per side and 2 per back, for side to side and back to back bolting applications. Each drawer has rating of 440lbs capacity. Drawers are made of all steel construction utilizing commercial grade steel. All drawers have a fail-safe drawer stop system to contain working drawers without damage. All drawers extend 100% out of the housing exposing all contents to reach and visibility. Each drawer front has a drawer pull and label system and accepts a label 1-1/8 high. Stainless Steel worksurface is 18 ga 340 SS. L1-CUSTOM KIT- CUSTOM CART WITH 5 DRAWERS, DIVIDERS AND CASTERS WITH BRAKES: Housing lock Qty 5 drawers with 7 useable height Qty 1 drawer 6-1/4 useable height Individual lock in lock out latches on each drawer 4 casters all swivel locking casters 2 height. L1-CUSTOM KIT CUSTOM CART WITH 6 DRAWERS, DIVIDERS AND CASTERS WITH BRAKES: Housing lock Qty 3 drawers with 4-5/8 useable height Qty 2 drawer 6-1/4 useable height Qty 1 drawer 7 useable height Individual lock in lock out latches on each drawer 4 casters all swivel locking casters 2 height. L1-CUSTOM KIT CUSTOM CART WITH 7 DRAWERS, DIVIDERS AND CASTERS WITH BRAKES: Housing lock Qty 2 drawers with 3-7/8 useable height Qty 4 drawers 4-5/8 useable height Qty 1 drawer 6-1/4 useable height Individual lock in lock out latches on each drawer 4 casters all swivel locking casters 2 height. L1-CUSTOM KIT CUSTOM CART WITH 3 PULL OUT SHELVES AND CASTERS WITH BRAKES Qty 2 rollout trays Qty 1 bottom pan shelf Stainless Steel work surface 30 x30 x1.5 4 casters all swivel locking casters 2 height. L1- SS-30X30X150 Stainless Steel work surface Tops for Cabinets 30 x30 x1.5 G1-56110-01 CUSTOM SS PEGBOARD CABINET 18 ga 340 SS Stainless Steel 78 H X 24 D X 40 W Four 5 H drawers Glass doors with plastic latches No lock G1-56110-03 CUSTOM SLOP TOP FOR D1-MODUCAB-PEGBOARD/OPTA AND D1-MODUCAB PEGCAB/OPTB 18 ga 340 SS SLOPED TOP G1-56110-07 CUSTOM: SET OF 50 PEGBOARD HOOKS FOR D1-MOCUCAB-PEGCAB/OPTA AND D1-MODUCAB-PEGCAB/OPTB Metal hooks in 7 S and 9 D G1-56110-04 CUSTOM DRAWER DIVERS SYSTEM FOR D1-MOCUCAB-PEGCAB/OPTA 18 ga 340 SS DRAWER DIVIDERS FOR 5 H DRAWER COMPLETE ONSITE ASSEMBLY AND INSTALLATION REQUIRED The information identified above is intended to be descriptive, not restrictive and to indicate the quality of the supplies/services that will be satisfactory. It is the responsibility of the interested source to demonstrate to the government that the interested parties can provide the supplies/services that fulfill the required specifications. We are seeking sources for products that meet the requirements set forth by the Buy American Act (41 U.S.C. ยงยง 8301-8305). The purpose of this notice is to identify potential offerings that are compliant with the BAA, which stipulates that the U.S. government give preference to domestically produced goods. All products offered must be either manufactured in the United States or, if manufactured outside of the United States, must qualify as domestic end products or construction materials as defined in the BAA and its implementing regulations. By submitting a response to this notice, you certify that the products offered meet these requirements and that upon request, you can provide documentation verifying compliance. Failure to comply with these criteria may result in disqualification from consideration. If you are interested and are capable of providing the sought-out supplies/services, please provide the requested information as well as the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hubzone, Woman Owned Small Business (WOSB), Large Business, etc.)? (2) Is your company considered small under the NAICS code identified in this RFI? (3) Are you the manufacturer, authorized distributor, and/or can provide equivalent solution to the items being referenced above? If applicable, please provide the manufacturer name and business size. (4) Is the end product manufactured in the United States; and is the cost of the components made in the U.S. at least 60% of the total cost of components required to manufacture the end product? If the item is not manufactured in the U.S., please provide the country of origin. (5) If you are a large business, do you have any designated/authorized distributors? If so, please provide their company name, telephone, point of Contact and size status (if available). (5) If you re a small business and you are an authorized distributor/reseller for the items identified above or an equivalent solution, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? (6) If you intend to sub contract any work on this contract, what portion of the total cost will be self-performed/will be performed by your organization? Please provide estimated detailed percentage breakdowns related to sub contracted work and completion of job. (7) Does your company have a Federal Supply Schedule (FSS) GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract? If so, please provide the contract number. (8) If you are an FSS GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract holder, are all the items/solution you are providing information for available on your schedule/contract? Please state if all or some items are available on the contract. (9) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. (10) Please submit your capabilities statement illustrating your organization s ability to meet the described salient characteristics or equal to items for planning purposes; show clear, compelling and convincing evidence that all equal to items"" meet all the salient characteristics. (11) Please review salient characteristics/statement of work (if applicable) and provide feedback or suggestions. If none, please reply as N/A. (12) Please provide your SAM.gov Unique Entity ID/Cage Code number. Responses to this notice shall be submitted via email to israel.garcia2@va.gov. Telephone responses will not be accepted. Responses must be received no later than 03/15/2024 by 12:00PM PST. All responses to this Sources Sought/RFI will be used for planning purposes only. If a solicitation is issued as a result of the information provided from this RFI, all interested parties must respond to that solicitation separately IAW the specifications of that solicitation announcement. Responses to this Sources Sought/RFI notice is not considered a request to be added to a prospective bidders list or to receive a copy of the solicitation.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/857a2b4111504ef2bba670a6d776761b/view)
- Place of Performance
- Address: Department of Veterans Affairs Phoenix VA Healthcare System 650 E Indian School Road, Phoenix 85012-1839
- Zip Code: 85012-1839
- Zip Code: 85012-1839
- Record
- SN06990142-F 20240309/240307230049 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |