Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF JUNE 22, 2024 SAM #8243
SOLICITATION NOTICE

44 -- Ventilated Enclosure/Paint Booth

Notice Date

6/20/2024 3:30:01 PM
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

333413 — Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing
 

Contracting Office

W6QM MICC-FT BLISS FORT BLISS TX 79916-6812 USA
 

ZIP Code

79916-6812
 

Solicitation Number

W911SG24Q0074
 

Response Due

6/26/2024 9:00:00 AM
 

Archive Date

07/11/2024
 

Point of Contact

Joseph Flores, Phone: 9155687870, Major Alan Lambert
 

E-Mail Address

joseph.a.flores.civ@army.mil, alan.r.lambert4.mil@army.mil
(joseph.a.flores.civ@army.mil, alan.r.lambert4.mil@army.mil)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Description

Product Description AIR FILTRATION SYSTEM REQUIREMENTS (VENTILATED ENCLOSURE/PAINT BOOTH) Many ventilation systems exist and could potentially be used to control the Cr(VI) hazard during aviationmaintenance processes.Selection should be done in collaboration with Industrial Hygiene and Safety professionals to ensure the ventilation system meets minimum design criteria. Defense Centers for Public Health-Aberdeen recommends the following minimum design criteria: � American Conference of Governmental Hygienists (ACGIH)� Industrial Ventilation Manual Figure VS-75-01 Large Paint Booth: Minimum cross-sectional velocity of 75 feet per minute (fpm) for a large deep booth with a cross-sectional area greater than 150 square feet (ft2). Airless electrostatic and high velocity low pressure spray paint operations require an air velocity of only 60 fpm. � ACGIH� Industrial Ventilation Manual Figure VS-80-01 Abrasive Blasting Room: Cross-sectional velocity range of 60-100 fpm. � American National Standards Institute/American Society of Safety Professionals (ANSI/ASSP) Z9.4-201 I (R2021): Requires a cross-sectional velocity of 80 fpm. Exhaust System - 18,000 Cubic Feet per Minute or higher to achieve ACGIH recommended TLVs - Must verify accurate testing and sampling data that system will provide clean air below the ACGIH TLVs of 0.0002mg/m3 - Exhaust air to be �RETURNED TO BUILDING� as per ANSI Z9.7 (NO ADDITIONAL VENTILATION REQUIREMENTS TO EXISTING STRUCTURES) - Multi-stage Particulate filtration exceeds the National Emission Standards for Hazardous Air Pollutants (NESHAP) 319 Enclosure - Enclosure must be Cross Draft Negative - Material NFPA 701 Compliant - Recommend size: 10�H X 18�W X 45�L (based on hangar size and unit requirements) Fire Suppression - Dry Chemical to protect both the enclosure and exhaust - Pre-engineered meeting NFPA 17 Standard for Dry Chemical extinguishing Replacement Filters� - 18 Month Supply� Lighting� - Eight (8) Lights: 10,000 lumens per light Warranty - 5-year warranty
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/29be62cacaeb4da4a4c4df53493b7523/view)
 

Place of Performance

Address: Fort Bliss, TX 79916, USA

Zip Code: 79916

Country: USA
 

Record

SN07103049-F 20240622/240620230112 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |