Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
SAMDAILY.US - ISSUE OF JUNE 26, 2024 SAM #8247
SOLICITATION NOTICE

A -- Multi Purpose Imager

Notice Date
6/24/2024 3:25:41 PM
 
Notice Type
Combined Synopsis/Solicitation
 
NAICS
334419 — Other Electronic Component Manufacturing
 
Contracting Office
SLAC Natl Accel Lab -DOE Contractor Menlo Park CA 94025 USA
 
ZIP Code
94025
 
Solicitation Number
SLACReq-347289
 
Response Due
7/8/2024 5:00:00 PM
 
Archive Date
07/09/2024
 
Point of Contact
Bernadette Espiritu, Katherine Jill A. Coh, Phone: 6509262770
 
E-Mail Address
espiritu@slac.stanford.edu, kcoh@slac.stanford.edu
(espiritu@slac.stanford.edu, kcoh@slac.stanford.edu)
 
Description
SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. The following is attached for you to complete and review: Buy American Act Certification (BAA) FP Commercial Supplies-Services T&Cs (August 2023) Representations & Certifications Rider (September 2022) Required item (s) are listed below: 1. SLC-1780-D-S-HV-C120-P00 Linear positioner with stick-slip drive - Qty 3��� Linear positioner with stick-slip drive, 51 mm travel, crossed-roller guide, increased blocking force, integrated optical encoder (S), HV-compatible (1e-6 mbar),Teflon-insulated stranded wires with braiding, cable length 120 cm, temporary plug= 2. SLC-1740-W-D-S-HV-C140-P00 Linear positioner with stick-slip drive� - �Qty 1��� Linear positioner with stick-slip drive, 26 mm travel, crossed-roller guide, U-shaped base, increased blocking force, integrated optical encoder (S), HV-compatible (1e-6 mbar), Teflon-insulated stranded wires with braiding, cable length 140 cm, temporary plug 3. SPECPART UHV Connector� -� �Qty 4�� UHV Connector - Panel Mount 15D Connector 15 pin male, PEEK sub-D panel mount connector with mounting ears.(Pins sold separately and are in picture as an example only) 4. SPECPART Contacts� -� Qty 4����� Contacts, Male 20~24 AWG T1 .040 Diameter male pin, gold plated contacts / Wire-well accepts 20~24 AWG wire size / 10-Pac 5. SPECPART strain relief for UHV Connector - �Qty 4 � strain relief for UHV Connector - Panel mount 3x parts (12*40*6) ���� 6. CABLES-VAC extension cable� -� Qty 4����� extension cable: Extension cable, HV-compatible (1e-6mbar) with UHV-DSUB-15f connector (material: PEEK, aluminum) and UHV-DSUB-15f connector (material: PEEK, aluminum); with 300cm cable (6x2xAWG28, PTFE stranded wires, common shielding) 7. CBL-A-0603-60 Adapter cable with DSUB-15f connector and DSUB-15m connector �-� Qty 4����� Adapter cable with DSUB-15f connector and DSUB-15m connector; with 60cm cable (6x2AWG26, common shielding, low-smoke / zero halogen PUR sheathing, UL-certified, trailing cable) 8. MCS2-S-0005 MCS2 Sensor Module �- �Qty 2����� MCS2 Sensor Module in small aluminum housing for up to three Stick-Slip/Scanner positioners (S-Sensor, L-Sensor, M-Sensor), 3xDSub15f, DSub15m socket to MCS2 controller (cable towards controller is not included), sensor type selectable per Module (3 channels) 9. MCS2-A-0600-1500 Sensor module� - �Qty 2� Sensor module cable with DSUB-15m connector and DSUB-15f connector; with 1500cm cable (8x2AWG26, common shielding, PVC sheathing) �� 10. MCS2-MOD-0001 MCS2 control system �- Qty 2��� �MCS2 control system (Rack module, one slot) for up to three Stick-Slip positioners (S-Sensor, L-Sensor, I-Sensor)� Quote is for product only; no on-site services are permitted. Source selection will be based on Lowest Priced and best Lead-Time. Please provide a price and lead time quotation by COB 07/08/2024. Send quote to espiritu@SLAC.stanford.edu. The bid closing date for this requirement is COB 07/08/2024. Is there any room for additional discounts for academic, ICPT, GSA, or government institutions? If possible, please provide a link to your webpage for a published price list to substantiate the quoted prices. Buy American Act Certification (BAA) applies to awards over $10,000.00. Representations & Certifications Rider is required. Once completed, the Reps and Certs are valid for one year until renewal. If you have already completed one within the year, please disregard it. Otherwise, please complete and return. All subcontractors are required to register in the System for Award Management (www.sam.gov). The resulting purchase order will be issued at a fixed price. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) will be made a part of the resulting order. Payment Terms will be NET-30 Freight terms will be FOB Destination Prepaid and Add. You are requested to mark and identify proprietary/confidential information provided in response to the solicitation. Contact me directly with any questions. Bernadette Espiritu Procurement Commodities Team SLAC National Accelerator Laboratory 2575 Sand Hill Road, Menlo Park, CA 94025 Email: espiritu@slac.stanford.edu
 
Web Link
SAM.gov Permalink
(https://sam.gov/opp/34f0be58bdb3429186290e372b99df5c/view)
 
Place of Performance
Address: Menlo Park, CA 94025, USA
Zip Code: 94025
Country: USA
 
Record
SN07105300-F 20240626/240624230113 (samdaily.us)
 
Source
SAM.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.