SPECIAL NOTICE
66 -- 66--MICRO-PROFILING SYSTEM
- Notice Date
- 8/19/2024 7:30:36 AM
- Notice Type
- Special Notice
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- OFFICE OF ACQUISITON GRANTS SACRAMENTO CA 95819 USA
- ZIP Code
- 95819
- Solicitation Number
- 140G0324Q0247
- Response Due
- 8/23/2024 9:00:00 AM
- Archive Date
- 08/24/2024
- Point of Contact
- Ongjoco, Joahnne, Phone: 9162789328
- E-Mail Address
-
jongjoco@usgs.gov
(jongjoco@usgs.gov)
- Description
- Notice of Intent This is a notice of intent to solicit from a single source. The purpose of this notice is to satisfy the requirements of FAR Subpart 5.101(a)(1) and FAR 5.2. No solicitation will be issued. However, all responsible parties may submit a capability statement by the closing date of this announcement which shall be considered by the agency. A determination not to compete this action based upon responses received is in the sole discretion of the Government. The U.S. Geological Survey (USGS), Earthquake Science Center (ESC) in Santa Cruz, CA intends to award a purchase order to �Unisense A/S for a Micro-profiling System to fulfill the need for precise measurement of oxygen, hydrogen sulfide (H2S), pH, and redox potential in marine sediments throughout a column of sediments without disturbing the depositional layers of the sediment. The Micro-profiling System must have microsensors and microelectrodes with very small diameters of 10 microns or less for the tips and no more than 10mm for the main glass shaft. It must be able to have very low detection limits of less than or equal to 0.3 �M for oxygen and hydrogen sulfide (H2S), less than or equal to 0.01 pH unit for pH, and less than or equal to 0.1 mV for redox potential. It must also be able to measure chemical changes on the submillimeter scale in a column of sediment that vary spatially in the x and y planes but especially in the z (depth) plane; precision of the z-axis (depth) down to 10 �m, while on the x- and y-axes the sensor position can be manipulated with 100 �m precision. Unisense AS is the only vendor known to the USGS that can meet the requirement as described above. The PSC for this requirement is 6650 Optical Instruments, Test Equipment, Components and Accessories. The NAICS code is 334516 Analytical Laboratory Instrument Manufacturing, with an associated size standard of 1,000 employees. Award will be made in accordance with Federal Acquisition Regulation (FAR) 13.106-1(b) and the procedures at FAR Part 12 entitled, Acquisition of Commercial Products and Commercial Services, and FAR Part 13 entitled, Simplified Acquisition Procedures. Responses or inquiries to this notice of intent shall only be accepted through electronic mail addressed to jongjoco@usgs.gov and must be uploaded and received in their entirety no later than August 23, 2024 at 1200 Eastern. Responses submitted by hardcopy or any web portal shall not be accepted nor considered.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/1a158e366b8f488bb728be3042507e2e/view)
- Record
- SN07175518-F 20240821/240819230112 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |