SOLICITATION NOTICE
58 -- Digital Signage Plasma Screens
- Notice Date
- 9/25/2024 11:21:17 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334310
— Audio and Video Equipment Manufacturing
- Contracting Office
- FA8136 AFMC PZIOB TINKER AFB OK 73145-9125 USA
- ZIP Code
- 73145-9125
- Solicitation Number
- FA8136-24-Q-0005
- Response Due
- 10/7/2024 2:00:00 PM
- Archive Date
- 10/22/2024
- Point of Contact
- Trey Marshall
- E-Mail Address
-
trey.marshall@us.af.mil
(trey.marshall@us.af.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- COMBINED SYNOPSIS/SOLICITATION: This combined synopsis/solicitation for digital signage plasma screens is prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is FA8136-24-Q-0005 and is issued as a Request For Proposal (RFP) in accordance with the requirements of Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, using the procedures of FAR Part 13, Simplified Acquisition Procedures, and FAR Part 37, Service Contracting. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2020-01 dated November 12, 2019. The FAC and FAR are available at https://www.acquisition.gov/FAR . This is solicited as Full and Open Competition under NAICS code 334310, Audio and Video Equipment Manufacturing. The award resulting from this solicitation will be made using a cascading set-aside order of procedure as follows: a). In accordance with FAR Subpart 19.502.2, Total Small Business Set-Aside Procedures, any award under this solicitation will be made on a competitive basis first to a small business concern; b). If there is inadequate competition for award to a small business concern (two or more responsible small business offers), award will be made on the basis of full and open competition considering all offers submitted by responsible business concerns. This acquisition currently has no Defense Priorities and Allocations System (DPAS) ratings. The award is subject to the Service Contract Labor Standards statute. The Offeror is required to have a current and active Contractor registration in the System for Award Management (SAM) website, https://sam.gov. Questions shall be submitted to Mr. Trey Marshall not later than 3 October 2024 via email at trey.marshall@us.af.mil. Proposals shall be submitted electronically to Trey Marshall by or before 7 October 2024 at 4:00 PM CST.� It is the Offeror�s responsibility to ensure all proposal documents are received prior to the close date and time.� The Government anticipates awarding a Firm-Fixed-Price (FFP) contract on the basis of Lowest Price Technically Acceptable (LPTA) evaluation criteria resulting from this RFP to the responsible Offeror whose proposal is conforming to the RFP. An award will be made to the Contractor who offers the lowest price and meets or exceeds the technical requirements of the solicitation. The Offerors shall submit a proposal that will demonstrate / describe how the company will meet or exceed the technical requirements stated in the List of Materials. Offerors will submit a quote that addresses their capability to provide listed materials INSTRUCTIONS TO OFFERORS General Instructions: This section provides general guidance for preparing proposals. Throughout this section, the term �Offeror� means the prime contractor submitting the proposal. The Offeror�s proposal must include all data and information requested and must be submitted in accordance with these instructions. Proposal will be reviewed for responsiveness prior to being technically evaluation. An Offeror who submits an incomplete package may be considered non-responsive and will be notified immediately with the reason. The proposal shall be compliant with the requirements as stated in the Request for Proposal (RFP). A proposal that is sufficiently documented to support price and technical requirements in a complete, orderly and detailed manner will enable the Government to perform a thorough and fair evaluation. Non-compliance with the instructions and RFP may result in an unfavorable proposal evaluation and may be grounds to eliminate the proposal from consideration for contract award. Offeror�s must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale along with providing any assumptions in their proposals. The Government intends to award without discussions. �The Government will not reimburse any costs incurred in relation to the proposal preparation. Offeror�s must clearly identify any exception to the solicitation terms and conditions and provide complete ����accompanying rationale along with providing any assumptions in their proposals. The Offeror shall submit an unclassified proposal, which demonstrates its ability to perform and meet the requirements in the Performance Work Statement (PWS). ��������� Proposal shall conform to all the requirements of this RFP IAW FAR Part 15.101-2. �� �������EVALUATION FACTORS FOR AWARD ��������� Basis for Award: Contract will be awarded to vendors on a lowest price technically acceptable (LPTA) basis. A contract will be awarded to the Offerors whose proposals conforms to the solicitations requirements (to include all stated terms, conditions, representations, certifications, and all other information required by this solicitation) and is judged, based on the evaluation factors and sub-factors, to represent the lowest price technical acceptability. Evaluation Factors. Evaluation Criteria: Quote conforming exactly to the attached list of materials by product number and quantity. This is brand name requirement an only quotes that match the list of materials listing Brightsign products will be accepted.� See attached Single Source Justification for Brand Name. ������ ���Evaluation Process. The Lowest Price Technically Acceptable (LPTA) source selection process will be used. Offeror�s technical proposal will be evaluated on an acceptable/unacceptable basis. By submission of its offer, the Offeror accedes to all solicitation requirements, including terms and conditions, representations, and certifications, and technical requirements. Failure to meet a requirement may result in an offer being determined non-responsive and thereby excluded from further consideration. Solicitation Requirements, Terms and Conditions. Offerors are required to meet all solicitation requirements, such as terms and conditions, representations and certifications, and technical requirements, in addition to those identified as factors or sub-factors. Failure to comply with the terms and conditions of the solicitation may result in the Offeror being determined ineligible for award. Offerors must clearly identify any exception to the solicitation�s terms and conditions and must provide complete supporting rationale. The Government reserves the right to determine any such exceptions unacceptable. ��� Terms and Conditions; The following clauses are included but not limited to: ��� 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment. ��� 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. ��� 52.204-26 Covered Telecommunications Equipment or Services-Representation. ��� 52.203-17 Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights ��� 52.204-19 Incorporation by Reference of Representations and Certifications ��� 52.212-1 Instructions to Offerors � Instructions to Offerors -- Commercial, applies to this acquisition. ��� 52.212-2 Evaluation Commercial items, Evaluation -- Commercial Items, The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and past performance considered. ��� Any offeror must include a completed copy of the provision, � �52.212-3, Offeror Representations and Certifications. The government will award to the contractor who will be most advantageous�to the government price and past performance. ��� 52.212-4 Contract Terms and Conditions -- Commercial Items, applies to this acquisition. ��� 52.212-5, Contract Terms and Conditions Required to Implement Statues or Executive Orders�Commercial Items, applies to this acquisition. ��� The following clauses within 52.212-5 are included but not limited to: ��� 52.204-10, Reporting Executive Compensation and First-Tier Subcontract ��� 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for ��� Debarment ��� 52.219-28, Post Award Small Business Program Representation ��� 52.222-3, Convict Labor ��� 52.222-19, Child Labor�Cooperation with Authorities and ��� 52.222-21, Prohibition of Segregated Facilities ��� 52.222-26, Equal Opportunity ��� 52.222-50, Combating Trafficking in Persons ��� 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While ��� 52.219-6, Notice of Total Small Business Set-Aside ��� 52.219-9, Small Business Subcontracting Plan ��� 52.247-34 F.O.B. Destination ��� 52.252-2 Clauses Incorporated by Reference ��� The following DFARS clauses are included but not limited to: ��� 252.203-7000 Requirements Relating to Compensation of Former DoD Officials ��� 252.203-7002 Requirements to Inform Employees of Whistleblower Rights ��� 252.204-7004 Alt-A System for Award Management Alternate A ��� 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls ��� 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting ��� 252.211-7003 Item Unique Identification and Valuation ��� 252.232-7003 Electronic Submission of Payment Requests & Receiving Reports ��� 252.232-7006 Wide Area Workflow Payment Instructions ��� Standard Commercial warranties apply
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/041bef514df047c69d935c46494fceeb/view)
- Place of Performance
- Address: Tinker AFB, OK 73145, USA
- Zip Code: 73145
- Country: USA
- Zip Code: 73145
- Record
- SN07224858-F 20240927/240925230121 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |