SOURCES SOUGHT
16 -- NET, CARGO, AERIAL DELIVERY (NSN: 1670-01-029-8556)
- Notice Date
- 10/15/2024 4:15:39 AM
- Notice Type
- Sources Sought
- NAICS
- 314999
— All Other Miscellaneous Textile Product Mills
- Contracting Office
- DLA TROOP SUPPORT PHILADELPHIA PA 19111-5096 USA
- ZIP Code
- 19111-5096
- Solicitation Number
- 7008931708
- Response Due
- 10/18/2024 1:00:00 PM
- Archive Date
- 10/19/2024
- Point of Contact
- Matthew Eckenrode, Phone: 215-737-0585
- E-Mail Address
-
Matthew.Eckenrode@dla.mil
(Matthew.Eckenrode@dla.mil)
- Description
- DLA Troop Support is seeking industry feedback from interested parties concerning the manufacturing of the following cargo net: NET, CARGO, AERIAL DELIVERY NSN: 1670-01-029-8556 RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. �FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT DLA DURING ""OPEN SOLICITATION ONLY"". TO RECEIVE A COPY OF THE DRAWING(S), FOR EBS SOLICITATIONS USE URL HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/ SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES UNLESS OTHERWISE NOTED FIRST ARTICLE TESTING IS REQUIRED RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN NSN 1670-01-029-8556 NFES 000531 Unit of Issue - EA (each) NET, CARGO, AERIAL DELIVERY: �Shall be in accordance with Forest Service Specification 5100-502F, dated Apr 2014, and the following characteristics: Style - Drawstring net First article sample(s) are required. Exceptions to Forest Service Specification 5100-502F: ADD to paragraph 4.6: Contractor testing shall be witnessed by government representatives. Remove paragraph 6.6 from 5100-502f. Add to paragraph 3.3.4: The perimeter rope may be WHITE in color. First article sample(s) are required. FIRST ARTICLE TEST IAW 5100-502 FIRST ARTICLE SAMPLES WILL BE SENT TO: USDA Forest Service National Technology and Development Program 5785 Highway 10 West Missoula, MT 59808 Ph: 406-329-3900 Fax: 406-329-3719 FAT sample package requirements: Exterior of the package should clearly/boldly identify ""FAT SAMPLE NSN xxxx-xx-xxx-xxxx"" Address label should include the following line: ATTN: Specifications & Standards Project Leader (First Article Test Items) All supporting documents (e.g. certificate of conformance) should be included within the FAT sample package. Certification: The contractor shall provide individual certificates of conformance for the component where required in this specification. A. The contractor shall provide the following information on the certificate: a. Item description, e.g., pear link, perimeter rope, mesh rope. B. Item manufacturers name, address, and telephone number. C. Manufacturers item part number. D. Procuring document for the item (to include the quantity and date ordered) E. Manufacturers lot number, if applicable. F. Manufacturers statement of safe working load and ultimate strength for the hoisting link and cordage, or statement or catalog sheet indicating the parts rating for thimbles. The statement or sheet shall include a part number or other that is traceable to the contractors procuring document. Certification of Ultimate Test result. The contractor shall prepare and provide as part of the first article inspection and upon request of any government inspector, a certificate of conformance for the ultimate strength test. The certificate shall contain the following. Product Description Description of the test equipment involved and the metrology information Manufacture's name, address, and telephone number Product's date of manufacture Test company name, address, and telephone number Testing date Test technician's name and title All characteristic test values (see 4.7) IAW BASIC NON GOVT STD 5100-502F REVISION NR F � DTD 04/01/2014 PART PIECE NUMBER: IAW REFERENCE QAP 14153 SQAP-FAT3 REVISION NR � � DTD 06/15/2022 PART PIECE NUMBER: Packaging: PKGING DATA - MIL-STD-2073-1E QUP:001 �PRES MTHD:ZZ �CLNG/DRY:1 �PRESV MAT:00 WRAP MAT:ZZ �CUSH/DUNN MAT:ZZ �CUSH/DUNN THKNESS:Z UNIT CONT:ZZ �OPI:M INTRMDTE CONT:D3 �INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING �REQUIREMENTS FOR PROCUREMENT SPECIAL PACKAGING CODES Z/ZZ: NFES NUMBER WILL BE ADDED TO THE LAST LINE OF THE MIL-STD-129 LABEL. EXAMPLE NFES 000531 Exterior label will be use with the name of the item on the label. Exterior container: �Each cargo net shall be packed in a corrugated fiberboard box, size 21 inches by 17 inches by 9 inches, minimum burst strength 350 psi, and shall be in compliance with the Uniform Freight Classification and the National Motor Freight Classification. Suppliers capable of furnishing these items must so indicate by email at matthew.eckenrode@dla.mil. The contractor will be required to manufacture these items and satisfy the Government�s delivery requirements. Responses to this survey must include documentation citing the following: -Contractor�s experience demonstrating the capability to meet the Government�s requirements in producing products that meet all performance requirements, and that are physically and functionally interchangeable with presently identified item. -Quality Standard (Government or Industry) that shall be in place for this effort. -Past Performance for the same or similar items. The contractor shall submit their part numbers, NSN, or nomenclature and the date of the last manufacturing effort of the same or similar items for which they have production experience. Government contract numbers, if applicable, shall be provided. -The contractor must provide information to show it possesses, or shall possess, adequate production plant facilities (equipment, tooling, and space) to enable it, or its subcontractors, to meet production delivery requirements for these items.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/a83f65291f41471ab6992df26caadf81/view)
- Place of Performance
- Address: San Joaquin, CA, USA
- Country: USA
- Country: USA
- Record
- SN07240716-F 20241017/241015230109 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |