Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF NOVEMBER 27, 2024 SAM #8401
SOLICITATION NOTICE

59 -- CHARGER,MAGNET

Notice Date

11/25/2024 12:47:28 AM
 

Notice Type

Solicitation
 

NAICS

334416 — Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing
 

Contracting Office

NAVSUP WEAPON SYSTEMS SUPPORT MECH MECHANICSBURG PA 17050-0788 USA
 

ZIP Code

17050-0788
 

Solicitation Number

N0010425QXA80
 

Response Due

12/2/2024 12:30:00 PM
 

Archive Date

12/17/2024
 

Point of Contact

Telephone: 7176054448
 

E-Mail Address

STACEY.HENRY@NAVY.MIL
(STACEY.HENRY@NAVY.MIL)
 

Description

CONTACT INFORMATION|4|N774.14|BU5|717-605-4448|stacey.henry@navy.mil| COMMERCIAL PRODUCT PROCUREMENT NOTICE|5|||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice & Receiving Report combo ||TBD|N00104|TBD|TBD|see schedule|TBD|||TBD|||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|WSS Mechanicsburg| EQUAL OPPORTUNITY (SEP 2016)|2||| CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVEORDERS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2024))|83|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| CONTINUED: CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2024))|15|||||||||||||||| OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL PRODUCTS AND COMMERCIALSERVICES (MAY 2024))|3|||| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2024)|13|||||||||||||| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAY 2024)|13|334416|550|||||||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||| EVALUATION--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)|4||||| EVALUATION FACTORS: Evaluation Utilizing Simplified Acquisition Procedures The Government will issue an order resulting from this Request for Quotation tothe responsible offeror whose quotation results in the best value to the Government, considering both price and a non-price factors. The following factors will be used to evaluate quotations in order of relative importance: 1) Price. 2) Past Performance. The offeror's past performance on related contracts will be evaluated to determine the following as appropriate: successful performance of contract requirements, quality and timeliness of delivery of goods and services, cost management, communications between contracting parties, and customer satisfaction. 3) Supplier Performance Risk as described in DFARS 252.204-7024. (End of provision) Quotes shall be received no later than the date specified in the solicitation in order to be considered. A. Electronic submission of any quotes, representations, and any necessary certifications shall be accomplished via an email directed to Stacey.l.henry8.civ@US.NAVY.MIL. B. General Requirements: MIL-STD Packaging, Government Source Inspection Required. C. All freight is FOB Origin. D. This RFQ is for a BUY/Procurement. The resultant award of this solicitation will be issued bilaterally, requiring the contractor's written acceptance prior to execution. Verify nomenclature, part number, and NSN prior to responding. E. Only a Firm-Fixed Price (FFP) will be accepted. F. The ultimate awardee of the proposed contract action must be an authorized source. Award of the proposed contract action will not be delayed while an unauthorized source seeks to obtain authorization. G. Your quote should include the following information for justification purposes: - New procurement unit price____________________ - Total Price _____________________ - Procurement delivery lead time (PTAT) _________________ days - Award to CAGE _______________ - Inspection & Acceptance CAGE, if not at Award to CAGE _____________ - Cost breakdown requested, including profit rate (if feasible). - Quote expiration date _______________ (90 Days minimum is requested). - Delivery Vehicle (If Delivery Order requested)(e.g. if your CAGE has a current BOA/IDIQ) H. Important Traceability Notice: If you are not the manufacturer of the material you are offering, you must provide an official letter and/or email from the OEM confirming that your company is an authorized distributor of their items. \ 1. SCOPE 1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirements for the CHARGER,MAGNET . 2. APPLICABLE DOCUMENTS 2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.1.1 Documents, drawings, and publications supplied are listed under ""Drawing Number"". These items should be retained until an award is made. 2.1.2 ""Document References"" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. 2.2 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order shall take precedence. Nothing in this contract/purchase order, however, shall supersede applicable laws and regulations unless a specific exemption has been obtained. DRAWING DATA=OD8913 |10001| G| |D|0001 | G|49998|0012956 DRAWING DATA=OD8913 |10001| G| |D|0002 | G|49998|0024953 DRAWING DATA=OD8913 |10001| G| |D|0003 | G|49998|0051086 DRAWING DATA=OD8913 |10001| G| |D|0004 | G|49998|0017005 DRAWING DATA=OD8913 |10001| G| |D|0005 | G|49998|0030190 DRAWING DATA=OD8913 |10001| G| |D|0006 | G|49998|0029822 DRAWING DATA=OD8913 |10001| G| |D|0007 | G|49998|0024135 DRAWING DATA=OD8913 |10001| G| |D|0008 | G|49998|0023231 DRAWING DATA=OD8913 |10001| G| |D|0009 | G|49998|0022366 DRAWING DATA=OD8913 |10001| G| |D|0010 | G|49998|0021458 DRAWING DATA=OD8913 |10001| G| |D|0011 | G|49998|0007608 DRAWING DATA=1534841 |10001| D| |D|0001 | D|49998|0080360 DRAWING DATA=1534842 |10001| D| |D|0001 | D|49998|0055323 DRAWING DATA=1534862 |10001| A| |D|0001 | A|49998|0066412 DRAWING DATA=1591543 |10001| B| |D|0001 | B|49998|0048574 DRAWING DATA=1593381 |10001| B| |D|0001 | B|49998|0052790 DRAWING DATA=2124252 |10001| K| |D|0001 | |49998|3157092 DRAWING DATA=2124252 |10001| F|DW |D|0001 | F|49998|0263131 DRAWING DATA=2124818 |10001| -| |D|0001 | -|49998|0121582 DRAWING DATA=2125321 |10001| H| |D|0001 | H|49998|0126200 DRAWING DATA=2125321 |10001| G|DW |D|0001 | G|49998|0098488 DRAWING DATA=2125383 |10001| L| |D|0001 | L|49998|0287301 DRAWING DATA=2125383 |10001| D|DW |D|0001 | D|49998|0283541 DRAWING DATA=2125450 |10001| B| |D|0001 | B|49998|0108154 DRAWING DATA=2125450 |10001| B|DW |D|0001 | B|49998|0089036 DRAWING DATA=2125505 |10001| B| |D|0001 | B|49998|0133042 DRAWING DATA=2146672 |10001| H| |D|0001 | H|49998|0079041 DRAWING DATA=2149628 |10001| B| |D|0001 | B|49998|0048371 DRAWING DATA=2527433 |10001| F| |D|0001 | F|49998|0183206 DRAWING DATA=2527433 |10001| E|DW |D|0001 | E|49998|0149166 DRAWING DATA=2530732 |10001| F| |D|0001 | F|49998|0185095 DRAWING DATA=2530733 |10001| M| |D|0001 | M|49998|0205336 DRAWING DATA=2530733 |10001| L|DW |D|0001 | L|49998|0191107 DRAWING DATA=2531417 |10001| T| |D|0001 | T|49998|0288332 DRAWING DATA=2531417 |10001| T| |D|0002 | T|49998|0248254 DRAWING DATA=2531417 |10001| T|DW |D|0001 | T|49998|0276016 DRAWING DATA=2531417 |10001| T|DW |D|0002 | T|49998|0172484 DRAWING DATA=2531417 |53711| F| |D|0001 | F|49998|0549317 DRAWING DATA=2532072 |10001| -| |D|0001 | -|49998|0086962 DRAWING DATA=2532072 |53711| N| |D|0001 | N|49998|2522269 DRAWING DATA=2533406 |10001| D| |A|0001 | D|49998|0190137 DRAWING DATA=2533408 |10001| B| |A|0001 | B|49998|0106792 DRAWING DATA=2533409 |10001| D| |A|0001 | D|49998|0131127 DRAWING DATA=2629918 |10001| L| |D|0001 | L|49998|0194380 DRAWING DATA=2633808 |10001| -| |D|0001 | -|49998|0091950 DRAWING DATA=2635246 |10001| E| |D|0001 | D|49998|0116332 DRAWING DATA=2635246 |10001| E| |D|0002 | D|49998|0034827 DRAWING DATA=2690800 |10001| L| |D|0001 | L|49998|0554590 DRAWING DATA=2690800 |10001| H|DW |D|0001 | H|49998|0279854 DRAWING DATA=2690800 |10001| H|DW |D|0003 | H|49998|0132262 DRAWING DATA=2694992 |10001| D| |D|0001 | D|49998|0073138 DRAWING DATA=3000360 |10001| B| |D|0001 | B|49998|0049511 DRAWING DATA=3000360 |10001| B|DW |D|0001 | B|49998|0064187 DRAWING DATA=3000365 |10001| -| |D|0001 | -|49998|0048399 DRAWING DATA=3000367 |10001| F| |D|0001 | F|49998|0094909 DRAWING DATA=3000367 |10001| |1N |D|0001 | |49998|0040906 DRAWING DATA=3000368 |10001| -| |D|0001 | -|49998|0075391 DRAWING DATA=3000370 |10001| B| |D|0001 | B|49998|0050870 DRAWING DATA=3000371 |10001| D| |D|0001 | D|49998|0089881 DRAWING DATA=3000371 |10001| C|DW |D|0001 | C|49998|0060299 DRAWING DATA=3000371 |10001| |1N |D|0001 | |49998|0041636 DRAWING DATA=3000410 |10001| C| |D|0001 | C|49998|0066097 DRAWING DATA=3000410 |10001| C|DW |D|0001 | C|49998|0065172 DRAWING DATA=3000411 |10001| B| |D|0001 | B|49998|0059195 DRAWING DATA=3000411 |10001| B|DW |D|0001 | B|49998|0063162 DRAWING DATA=3000416 |10001| B| |D|0001 | B|49998|0154228 DRAWING DATA=3000416 |10001| B| |D|0002 | A|49998|0093323 DRAWING DATA=3000416 |10001| B| |D|0003 | B|49998|0050886 DRAWING DATA=3000417 |10001| L| |D|0001 | L|49998|3136501 DRAWING DATA=3000417 |10001| F|DW |D|0001 | F|49998|0162538 DRAWING DATA=3000417 |10001| F|DW |D|0002 | F|49998|0112999 DRAWING DATA=3000417 |10001| L|1N |D|0001 | L|49998|0080274 DRAWING DATA=3000422 |10001| L| |D|0001 | L|49998|0200077 DRAWING DATA=3000422 |10001| L| |D|0002 | L|49998|0076726 DRAWING DATA=3000422 |10001| F|DW |D|0001 | F|49998|0175821 DRAWING DATA=3000422 |10001| F|DW |D|0002 | D|49998|0081123 DRAWING DATA=3000422 |10001| |1N |D|0001 | |49998|0045446 DRAWING DATA=3000422 |10001| |1N |D|0002 | |49998|0022695 DRAWING DATA=3000422 |10001| G|1N |D|0001 | G|49998|0136159 DRAWING DATA=3000422 |10001| G|1N |D|0002 | G|49998|0113356 DRAWING DATA=3000448 |10001| C| |D|0001 | C|49998|2484754 DRAWING DATA=3000448 |10001| C|1N |D|0001 | C|49998|0274863 DRAWING DATA=3000449 |10001| A| |D|0001 | A|49998|0051329 DRAWING DATA=3000450 |10001| B| |D|0001 | B|49998|0044385 DRAWING DATA=3000450 |10001| B|DW |D|0001 | B|49998|0048078 DRAWING DATA=5771983 |53711| H| |D|0001 | H|49998|0343387 DRAWING DATA=5771983 |53711| B|DW |D|0001 | B|49998|0023009 DRAWING DATA=5771983 |53711| B|DW |D|0002 | B|49998|0035596 DRAWING DATA=5771983 |53711| B|DW |D|0003 | B|49998|0034740 DRAWING DATA=5771983 |53711| B|DW |D|0004 | B|49998|0029199 DRAWING DATA=5771983 |53711| B|DW |D|0005 | B|49998|0038337 DRAWING DATA=5771983 |53711| B|DW |D|0006 | B|49998|0044360 DRAWING DATA=5771983 |53711| B|DW |D|0007 | B|49998|0040845 DRAWING DATA=5771983 |53711| B|DW |D|0008 | B|49998|0031709 DRAWING DATA=5771983 |53711| B|DW |D|0009 | B|49998|0021044 DRAWING DATA=5771983 |53711| B|DW |D|0010 | B|49998|0021736 DRAWING DATA=5771983 |53711| B|DW |D|0011 | B|49998|0017165 DRAWING DATA=5771983 |53711| B|DW |D|0012 | B|49998|0018281 DRAWING DATA=5771983 |53711| B|DW |D|0013 | B|49998|0020507 DRAWING DATA=5771983 |53711| B|DW |D|0014 | B|49998|0021698 DRAWING DATA=5771983 |53711| B|DW |D|0015 | B|49998|0021473 DRAWING DATA=5771983 |53711| B|DW |D|0016 | B|49998|0046562 DRAWING DATA=5771983 |53711| B|DW |D|0017 | B|49998|0031809 DRAWING DATA=5771983 |53711| B|DW |D|0018 | B|49998|0029528 DRAWING DATA=5771983 |53711| B|DW |D|0019 | B|49998|0027699 DRAWING DATA=5771983 |53711| B|DW |D|0020 | B|49998|0032838 DRAWING DATA=5771983 |53711| B|DW |D|0021 | B|49998|0016113 DRAWING DATA=5771983 |53711| B|DW |D|0022 | B|49998|0020234 DRAWING DATA=5771983 |53711| B|DW |D|0023 | B|49998|0020257 DRAWING DATA=5771983 |53711| B|DW |D|0024 | B|49998|0025109 DRAWING DATA=5771983 |53711| B|DW |D|0025 | B|49998|0027599 DRAWING DATA=5771983 |53711| B|DW |D|0026 | B|49998|0027839 DRAWING DATA=5771983 |53711| B|DW |D|0027 | B|49998|0027172 DRAWING DATA=5771983 |53711| B|DW |D|0028 | B|49998|0025246 DRAWING DATA=5771983 |53711| B|DW |D|0029 | B|49998|0021502 DRAWING DATA=5771983 |53711| B|DW |D|0030 | B|49998|0014118 DRAWING DATA=5771983 |53711| B|DW |D|0031 | B|49998|0014482 DRAWING DATA=5771983 |53711| B|DW |D|0032 | B|49998|0015993 DRAWING DATA=5771983 |53711| B|DW |D|0033 | B|49998|0013096 DRAWING DATA=5771983 |53711| B|DW |D|0034 | B|49998|0013601 DRAWING DATA=5771983 |53711| B|DW |D|0035 | B|49998|0011811 DRAWING DATA=5771983 |53711| B|DW |D|0036 | B|49998|0013654 DRAWING DATA=5831310 |53711| H| |D|0001 | |49998|8316714 DRAWING DATA=5831310 |53711| E|DL |D|0001 | |49998|0382057 DRAWING DATA=5831310 |53711| A|DW |D|0001 | A|49998|0229660 DRAWING DATA=5831310 |53711| A|DW |D|0002 | A|49998|0081301 DRAWING DATA=5831310 |53711| A|DW |D|0003 | A|49998|0109594 DRAWING DATA=5831310 |53711| E|1N |D|0001 | |49998|0735379 DRAWING DATA=5831310 |53711| H|1N |D|0001 | |49998|0118279 DRAWING DATA=6299067 |53711| -| |D|0001 | -|49998|0186090 DRAWING DATA=631389 |10001| A|DW |D|0001 | A|49998|0098372 DRAWING DATA=631389 |10001| A|DW |D|0002 | -|49998|0060827 DRAWING DATA=631389 |10001| A|LD |D|0001 | A|49998|0083076 DRAWING DATA=631389 |10001| A|LD |D|0002 | -|49998|0072092 DRAWING DATA=631775 |10001| B|LD |D|0001 | B|49998|0110081 DRAWING DATA=631775 |10001| B|LD |D|0002 | A|49998|0052277 DRAWING DATA=631775 |10001| B|LD |D|0003 | A|49998|0061831 DRAWING DATA=631776 |10001| C|DW |D|0001 | C|49998|0084462 DRAWING DATA=631776 |10001| C|DW |D|0002 | B|49998|0096441 DRAWING DATA=631776 |10001| D|LD |D|0001 | D|49998|0118677 DRAWING DATA=631776 |10001| D|LD |D|0002 | D|49998|0097459 DRAWING DATA=631776 |53711| E|LD |D|0001 | E|49998|1568260 DRAWING DATA=631776 |53711| E|1N |D|0001 | E|49998|0085708 DOCUMENT REF DATA=MIL-STD-129 | | |P |041029|A| |03| DOCUMENT REF DATA=ISO9001 | | | |010417|A| | | DOCUMENT REF DATA=MIL-STD-973 | | | |950113|A| |03| 3. REQUIREMENTS 3.1 Design, Manufacture, and Performance - Except as modified herein, the CHARGER,MAGNET furnished under this contract/purchase order shall meet the design, manufacture, and performance requirements specified on drawing ;3000422; cage ;10001; . 3.2 Marking - This item shall be physically identified in accordance with ;MIL-STD-129; . 3.3 Configuration Control - MIL-STD-973 entitled ""Configuration Management"", Paragraph 5.4.8, Configuration Control (Short Form Procedure), is hereby incorporated. The Contractor shall submit all Engineering Change Proposals in accordance with MIL-STD-973, Paragraph 5.4.8.2 and Appendix D. Requests for Deviations shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.3 and Appendix E. Requests for Waivers shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.4 and Appendix E. (Original and two copies shall be submitted to Contracting Officer, NAVICP-MECH, P. O. Box 2020, Mechanicsburg Pa. 17055-0788.) 3.3.1 Configuration Control - When the Contractor has received authorization on a prior contract for the same NSN for the use of a drawing of a later revision status, that authorization is hereby extended to all succeeding contracts/purchase orders until another drawing revision is approved. The Contractor will notify the PCO of this occurrence in each instance, in the response to the solicitation. Such notification shall be in writing setting forth the contract under which the prior authorization was granted, the date of the granting of the authorization, and the name of the granting authority. Contractors shall also refer technical inquiries (other than those covered by MIL-STD-973) on company letterhead signed by a responsible company official, with copies distributed as stated below. The original and two copies of all Contractor generated correspondence regarding configuration shall be submitted to Contracting Officer, NAVICP-MECH, P.O. Box 2020, Mechanicsburg, PA 17055-0788. Contractors are cautioned that implementing engineering changes, waivers, deviations or technical inquiries into the contract/purchase order without approval of the Contracting Officer will be at the sole risk of the Contractor. 3.4 Mercury Free - The material supplied under this contract/purchase order is intended for use on submarines/surface ships and therefore shall contain no metallic mercury and shall be free from mercury contamination. Mercury contamination of the material will be cause for rejection. If the inclusion of metallic mercury is required as a functional part of the material furnished under this contract, the Contractor shall obtain written approval from the Procurement Contracting Officer before proceeding with manufacture. The contractor's request shall explain in detail the requirements for mercury, identify specifically the parts to contain mercury, and explain the method of protection against mercury escape. Such a request will be forwarded directly to the Procurement Contracting Officer with a copy to the applicable Government Inspector. Upon approval by the Contracting Officer, the vendor will provide a ""Warning Plate"" stating that metallic mercury is a functional part of the item and will include name and location of that part. The use of mercury, mercury compounds, or mercury-bearing instruments and/or equipment in a manner which might cause contamination in the manufacture, assembly, or test of material on this contract is prohibited. The most probable causes of contamination are direct-connected manometers, mercury vacuum pumps, mercury seals, or the handling of mercury in the immediate vicinity. Mercury switches, mercury in glass thermometers, standard cells and other items containing mercury may be used if they are located so as not to constitute a contamination hazard. If external contamination by metallic mercury occurs or is suspected, the following test may be used to determine whether contamination by metallic mercury exists or whether corrective cleaning measures have been effective. Enclose the equipment in a polyethylene bag or close-fitting airtight container for eight hours at room temperature (70 degrees F minimum).Sample the trapped air and if mercury vapor concentration is 0.01 mg/cu meter or more, the material is mercury contaminated insofar as the requirements of this contract are concerned. These requirements shall be included in any subcontract or purchase order hereunder and the Contractor shall insure SubContractor compliance with these requirements. Technical questions pertaining to these requirements shall be referred to the Procurement Contracting Officer via the cognizant Administrative Contracting Officer. For background, the following information is provided: Mercury is corrosive to gold, silver, nickel, stainless steels, aluminum and copper alloys. Stainless steels, nickel, and copper alloys are widely used in reactor plants and other submarine/surface ship systems. Accidental trapping of mercury in a component could cause serious damage to vital parts. Mercury is also toxic if inhaled, ingested, or absorbed through the skin. It is evident that grave consequences could result from small amounts of mercury vapor present in an unreplenished submarine/surface ship atmosphere. 4. QUALITY ASSURANCE 4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.2 Quality System Requirements - The supplier shall provide and maintain a quality system acceptable to the Government. The quality system requirements shall be in accordance with ISO 9001. 4.2.1 ;Suppliers currently using and maintaining Inspection System Requirements to MIL-I-45208 are granted permission to utilize this if desired.; 4.3 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material. 4.4 Records of Inspection - (This requirement is not applicable to Government Purchase Orders) Records of all inspection work performed by the Contractor, as referenced elsewhere in this contract, shall be kept complete and available to the Government during the performance of the contract and for a period of four years after final delivery of supplies. 5. PACKAGING 5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below. MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES 6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. A. Availability of Cancelled Documents - The DODSSP offers cancelled documents that are required by private industry in fulfillment of contractual obligations in paper format. Documents can be requested by phoning the Subscription Services Desk. B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. They may be obtained from the publishers of the applicable societies. C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035 D. On post-award actions, requests for ""Official Use Only"" and ""NOFORN"" (Not Releasable To Foreign Nationals) documents must identify the Government Contract Number, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document. E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from: Contracting Officer NAVICP-MECH Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered from: Commanding Officer NAVICP-MECH Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from: Naval Inventory Control Point Code 1 Support Branch 700 Robbins Avenue Phildelphia, Pa. 19111-5094 H. Interim Changes and Classified Specifications shall be obtained by submitting a request on DD Form 1425 to NAVICP-MECH. 6.2 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. Most Specifications can obtained directly from http://quicksearch.dla.mil/ A. Availability of Cancelled Documents - The DODSSP offers cancelled documentsthat are required by private industry in fulfillment of contractual obligationsin paper format. Documents can be requested by phoning the Subscription Services Desk. B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. Theymay be obtained from the publishers of the applicable societies. C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035 D. On post-award actions, requests for ""Official Use Only"" and ""NOFORN"" (Not Releasable To Foreign Nationals) documents must identify the Government ContractNumber, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document. E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from: Contracting Officer NAVSUP-WSS Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered enue: Commanding Officer NAVSUP-WSS Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from: Commanding Officer NAVSUP-WSS Code 1 Support Branch 700 Robbins Avenue Philadelphia, Pa. 19111-5094 H. Interim Changes and Classified Specifications must be obtained by submitting a request on DD Form 1425 to NAVSUP-WSS. 6.3 In accordance with OPNAVINST 5510.1 all documents and drawings provided by the U.S. Navy to perspective Contractors must include a ""Distribution Statement"" to inform the contractor of the limits of distribution, and the safeguarding of the information contained on those documents and drawings. There are 7 (seven) seperate distribution statement codes used for non-classified documents and drawings. The definition for each is as follows: A... approved for public release; distribution is unlimited. B... distribution authorized to US Governments agencies only. C... distribution authorized to US Government agencies and their contractors. D... distribution authorized to DoD and DoD contractors only. E... distribution authorized to DoD Components only. F... further distribution only as directed by Commander, Naval Sea Systems Command, code 09T. X... distribution is authorized to US Government agencies and private individuals or enterprises eligible to obtain export controlled technical data in accordance with OPNAVINST 5510.161. 6.4 Notice To Distributors/Offerors - Consideration for award of contract shall be given only to authorized distributors of the original manufacturer's item represented in this solicitation. If you desire to be considered as a potential source for award of this contract, proof of being an authorized distributor shall be provided on company letterhead signed by a responsible company official and sent with your offer to the Procurement Contracting Officer.
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/8c1eed3c553b4c988c6dcdac27217e40/view)
 

Record

SN07274932-F 20241127/241125230111 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |