SOLICITATION NOTICE
A -- Sensor Assembly
- Notice Date
- 12/5/2024 9:19:45 AM
- Notice Type
- Solicitation
- NAICS
- 333310
—
- Contracting Office
- SLAC Natl Accel Lab -DOE Contractor Menlo Park CA 94025 USA
- ZIP Code
- 94025
- Solicitation Number
- SLAC_350352_Sensory_Assembly
- Response Due
- 12/19/2024 5:00:00 PM
- Archive Date
- 01/03/2025
- Point of Contact
- Katherine Jill A. Coh, Phone: 6509262770
- E-Mail Address
-
kcoh@slac.stanford.edu
(kcoh@slac.stanford.edu)
- Description
- SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. Hello, Looking for US Domestic sources for the following required item(s) listed below: 1.) 104220014 � Sen, Assy, CC, NW25KF, LEMO = Qty 4 2.) 104220008 � Sen, Assy, CC, 250C LEMO, FE = Qty 14 3.) 103170037SH � CONV.GA, ASSY, KF25, 250C = Qty 10 Technical evaluation criteria are: The 104220014 Cold Cathode Sensor has a 2.75 inch Conflat fitting, a LEMO Connector, and is bakable up to 250�C while operating. Technical Specs Type Vacuum Sensor Sensor Type Cold Cathode Measurement Range 1.0 x 10-11 to 1.0 x 10-2 Torr 1.3 x 10-11 to 1.3 x 10-2 mbar 1.3 x 10-9 to 1.3 Pascal Set Point Range 2.0 x 10-10 to 9.5 x 10-3 Torr 2.7 x 10-10 to 1.2 x 10-2 mbar 2.7 x 10-8 to 1.2 Pascal Resolution 1% of indicated decade, except 10% below 10-10 Torr and above 10-3 Torr Reproducibility 5% of indicated pressure Connector LEMO Operating Temperature 0-250�C (32-482�F) Bake Out Temperature 0-250�C (32-482�F) Set Point Response 120 ms (<10ms with CL card) Exposed Materials Stainless steel, silver-copper brazing alloy, alumina ceramics, aluminum AL 6061, Elgiloy�, OFHC� copper Internal Volume 1.8 in3 (30 cm3) max Weight 2.9 lbs. (1.3 Kg) with CF Flange The 104220008 Cold Cathode Sensor with a field emitter has a 2.75 inch Conflat fitting, a LEMO Connector, and is bakable up to 250�C while operating. Technical Specs Type Vacuum Sensor with Field Emitter Sensor Type Cold Cathode Measurement Range 1.0 x 10-11 to 1.0 x 10-2 Torr 1.3 x 10-11 to 1.3 x 10-2 mbar 1.3 x 10-9 to 1.3 Pascal Set Point Range 2.0 x 10-10 to 9.5 x 10-3 Torr 2.7 x 10-10 to 1.2 x 10-2 mbar 2.7 x 10-8 to 1.2 Pascal Resolution 1% of indicated decade, except 10% below 10-10 Torr and above 10-3 Torr Reproducibility 5% of indicated pressure Connector LEMO Operating Temperature 0-250�C (32-482�F) Bake Out Temperature 0-250�C (32-482�F) Set Point Response 120 ms (<10ms with CL card) Exposed Materials Stainless steel, silver-copper brazing alloy, alumina ceramics, aluminum AL 6061, Elgiloy�, OFHC� copper Internal Volume 1.8 in3 (30 cm3) max Weight lbs. (1.3 Kg) with CF Flange The 103170037SH Vacuum Gauge Cable connects 345 or 317 vacuum gauge sensors to 945, 947, 937B, and 946 controllers, and is 10 feet long. Technical Specs Type Vacuum Gauge Cable Compatible with 345, 317 Sensors and 937B, 946 Controllers Quote is for product only; no on-site services permitted. Source selection will be based on Lowest Priced Technically Acceptable Method and best Lead-Time. Please provide a price and lead time quotation by COB December 19, 2024. Send quote to kcoh@SLAC.stanford.edu. Please be advised that the requirement was also posted in SAM.gov. Is there any room for additional discount such as for Academic, ICPT, GSA, or Government Institutions? Buy American Act Certification (BAA) applies to awards over $10,000. Representations & Certifications Rider is required. Once completed the Reps and Certs is valid for one year until renewal. If you have already completed one within the year please disregard. Otherwise, please complete and return. All subcontractors are required to register in the System for Award Management (www.sam.gov). If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted. The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) will be made a part of the resulting order. Please mark up terms and conditions if you wish to negotiate. No mark ups mean that you accept SLAC Terms and Conditions. Payment Terms will be NET-30 Freight terms will be FOB Destination Prepaid and Add You are requested to mark and identify proprietary/confidential information provided in response to the solicitation. Contact me directly with any questions. Sincerely, Katherine Jill A. Coh Procurement Commodities Team Lead SLAC National Accelerator Laboratory 2575 Sand Hill Road Menlo Park, CA 94025 Phone: 650-926-2770 Email: kcoh@slac.stanford.edu
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/ac425bdde4de41b2a13a9b89e83f9ea6/view)
- Place of Performance
- Address: Menlo Park, CA 94025, USA
- Zip Code: 94025
- Country: USA
- Zip Code: 94025
- Record
- SN07282314-F 20241207/241205230107 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |