Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF JANUARY 17, 2025 SAM #8452
SOLICITATION NOTICE

20 -- 20--TANK ASSY,ICM

Notice Date

1/15/2025 10:08:50 AM
 

Notice Type

Solicitation
 

NAICS

336612 — Boat Building
 

Contracting Office

NAVSUP WEAPON SYSTEMS SUPPORT MECH MECHANICSBURG PA 17050-0788 USA
 

ZIP Code

17050-0788
 

Solicitation Number

N0010425RZB38
 

Response Due

1/29/2025 11:00:00 AM
 

Archive Date

02/13/2025
 

Point of Contact

Telephone: 7176057574
 

E-Mail Address

ASHTON.K.PERRY.CIV@US.NAVY.MIL
(ASHTON.K.PERRY.CIV@US.NAVY.MIL)
 

Description

CONTACT INFORMATION|4|N742.11|WR3DD|717-605-7574|ashton.k.perry.civ@us.navy.mil| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (NAVICP REVIEW FEB 1991)(FEB 1999)|1|See specification sections C and E| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| INSPECTION AND ACCEPTANCE - SHORT VERSION|8|X||X|||||| TIME OF DELIVERY (JUNE 1997)|20|CLIN 0001|TWELVE (12)|770 days|||||||||||||||||| STOP-WORK ORDER (AUG 1989)|1|| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Certifications - Stand-Alone Receiving Report; Material - Receiving Report & Invoice Combo|Material - Inspect & Accept at Source|TBD|N00104|TBD|Material-S4306A ; Certifications- N39040|N50286|TBD|133.2|N/A|N/A| Certifications - N39040|N/A|N/A|See DD1423.|PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL| NOTE FOR CONTRACTOR/ADMINISTRATIVE CONTRACTING OFFICER|3|||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|WSS| VALUE ENGINEERING (JUN 2020)|3|||| EQUAL OPPORTUNITY (SEP 2016)|2||| INTEGRITY OF UNIT PRICES (NOV 2021)|1|| EQUAL OPPORTUNITY FOR VETERANS (JUN 2020)|4||||| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUNE 2003)|6|One year from date of delivery.|One year from date of delivery.||||| WARRANTY OF DATA--BASIC (MAR 2014)|2||| SMALL BUSINESS SUBCONTRACTING PLAN (SEP 2023)|4||||| EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (JUN 2020)|2||| TRANSPORTATION OF SUPPLIES BY SEA (OCT 2024)|2||| REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER THAN CERTIFIED COST OR PRICING DATA-MODIFICATIONS (NOV 2021))|7|||||||| NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (OCT 2020)(DEVIATION 2020-O0008)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2024)|13|||||||||||||| BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (JAN 2025)|13|336612|1,000 (# of employees)|||||||||||| COST ACCOUNTING STANDARDS NOTICES AND CERTIFICATION (DEVIATION 2018-O0015)(MAY 2018))|1|| INSTRUCTIONS TO OFFERORS -- COMPETITIVE ACQUISITION (NOV 2021)|2||| TYPE OF CONTRACT (APR 1984)|1|Firm-Fixed Price| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||X| REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER THAN CERTIFIEDCOST OR PRICING DATA (MAY 2024))|1|| 1. This is an Advanced Equipment Repair Program (AERP) requirement. 2. DD1423 Data Item A001 (Inspection and Test Plan) may be waived if already on file at NAVSUP WSS Mechanicsburg. 3. Certifications shall be submitted in WAWF at least 20 days prior to therequired delivery date to allow time for Portsmouth NSY review. 4. The following proposed delivery schedule applies: WELD PROCEDURES AND QUALIFICATION DATA 120 DAYS AFTER CONTRACT AWARD PRIOR TO PERFORMING ANY WELDING. REVIEW (APPROVAL/DISAPPROVAL) MUST BE ACCOMPLISHED WITHIN 60 DAYS FROM DATE OF RECEIPT RADIOGRAPHIC SHOOTING SKETCHES (RSS) 45 DAYS AFTER CONTRACT AWARD PRIOR TOPERFORMING RADIOGRAPHY. REVIEW (APPROVAL/DISAPPROVAL) MUST BE ACCOMPLISHED WITHIN 30 DAYS FROM DATE OF RECEIPT. PRODUCTION RADIOGRAPHY (PR) 135 DAYS AFTER APPROVAL OF RADIOGRAPHIC SHOOTINGSKETCHES. REVIEW (APPROVAL/DISAPPROVAL) MUST BE ACCOMPLISHED WITHIN 30 DAYS FROM DATE OF RECEIPT. 5. All contractual documents (i.e. contracts, purchase orders, delivery orders,task orders, and modifications) related to the instant procurement areconsidered to be 'issued' by the Government when copies are either deposited in the mail, transmitted by facsimile, or sent by other electronic commercemethods such as email. The Government's acceptance of the contractor's proposalconstitutes bilateral agreement to 'issue' contractual documents as detailed herein. 6.The resultant award of this solicitation will be issued bilaterally,requiring the contractor's written acceptance prior to execution. 7. If requirement will be packaged at a location different from the offeror;saddress, the offeror shall provide the name, address, and CAGE of thefacility. 8. Any contract awarded as a result of this solicitation will be DO certifiedfor national defense under the Defense Priorities and Allocations System(DPAS). Provision 52.211-13, Notice of Priority Rating for National Defense,Emergency Preparedness, and Energy Program Use, shall be inserted insolicitations when the contract to be awarded shall be a rated order. 9. Offerors must have a valid U.S. Security Clearance of CONFIDENTIAL or higher in order to respond to this RFP N0010425RZB38, because the RFPN0010425RZB38 includes an annex classified at the CONFIDENTIAL level which willbe released only to offerors possessing the appropriate clearance. All classified material must be handled in accordance with the National Industrial Security Program Operating Manual (NSPOM)(DoD 5220-22-M) and Industrial Security Regulation (DoD5220.22-R) \ 1. SCOPE 1.1 The material covered in this contract/purchase order will be used in a crucial shipboard system. The use of incorrect or defective material would create a high probability of failure resulting in serious personnel injury, loss of life, loss of vital shipboard systems, or loss of the ship itself. Therefore, the material has been designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) and special control procedures are invoked to ensure receipt of correct material. 2. APPLICABLE DOCUMENTS 2.1 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order must take precedence. Nothing in this contract/purchase order, however, must supersede applicable laws and regulations unless a specific exemption has been obtained. 2.2 Identification of Classified Documents - This contract/purchase order requires the Contractor to have authorized access to classified documents in accordance with the attached Contract Security Classification Specification (DD Form 254). The classified documents and security level are: ;6984058 - CONFIDENTIAL; 2.3 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.3.1 Specification Revisions - The specification revisions listed under ""Documents References"" below are the preferred revision. Older and/or newer r evisions are acceptable when listed within Contract Support Library Reference Number CSD155 in ECDS (Electric Contractor Data Submission) at: ht tps://register.nslc.navy.mil/. This is to allow Contractors to use certain acceptable older specification revisions to purge their existing stock of material certified to those older revisions or to use newer specification revisions when material is certified to newly released revisions,without requiring the submittal of waiver/deviation requests for each specification revision on every contract. Revisions of specifications reflecting editorial and/or re-approval (e.g. E2009, R2014, etc.) are considered inconsequential, but are acceptable when their revisions are listedwithin CSD155 or elsewhere within this contract. 2.3.2 Documents, drawings, and publications supplied are listed under ""Drawing Number"". These items should be retained until an award is made. 2.3.3 ""Document References"" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. DRAWING DATA=ERH692-1805A10 |96169| B| |D|0001 | B|49998|0058869 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0001.1 | B|49998|0055255 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0001.2 | B|49998|0033791 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0002 | B|49998|0069436 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0003 | B|49998|0089424 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0004 | B|49998|0060019 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0005 | B|49998|0065743 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0006 | B|49998|0062436 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0007 | B|49998|0065697 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0008 | B|49998|0064144 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0009 | B|49998|0064780 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0010 | B|49998|0066997 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0011 | B|49998|0054689 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0012 | B|49998|0050491 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0013 | B|49998|0040719 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0014 | B|49998|0258455 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0015 | B|49998|0268176 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0016 | B|49998|0291139 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0017 | B|49998|0483371 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0018 | B|49998|0196426 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0019 | B|49998|0107977 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0020 | B|49998|0109066 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0021 | B|49998|0153771 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0022 | B|49998|0149700 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0023 | B|49998|0125724 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0024 | B|49998|0137127 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0025 | B|49998|0163750 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0026 | B|49998|0249017 DRAWING DATA=ERH692-1805A10 |96169| B| |D|0027 | B|49998|0163495 DRAWING DATA=ERH692-1805A14 |96169| A| |D|0001 | A|49998|0053363 DRAWING DATA=ERH692-1805A14 |96169| A| |D|0001.1 | A|49998|0048132 DRAWING DATA=ERH692-1805A14 |96169| A| |D|0001.2 | A|49998|0012616 DRAWING DATA=ERH692-1805A14 |96169| A| |D|0002 | A|49998|0078717 DRAWING DATA=ERH692-1805A14 |96169| A| |D|0003 | A|49998|0061819 DRAWING DATA=ERH692-1805A14 |96169| A| |D|0004 | A|49998|0061022 DRAWING DATA=ERH692-1805A14 |96169| A| |D|0005 | A|49998|0039463 DRAWING DATA=ERH692-1805A14 |96169| A| |D|0006 | A|49998|0180622 DRAWING DATA=ERH692-1805A14 |96169| A| |D|0007 | A|49998|0164848 DRAWING DATA=ERH692-1805A14 |96169| A| |D|0008 | A|49998|0193363 DRAWING DATA=ERH692-1805A16 |96169| A| |D|0001 | A|49998|0056815 DRAWING DATA=ERH692-1805A16 |96169| A| |D|0001.1 | A|49998|0016081 DRAWING DATA=ERH692-1805A16 |96169| A| |D|0002 | A|49998|0076230 DRAWING DATA=ERH692-1805A16 |96169| A| |D|0003 | A|49998|0257234 DRAWING DATA=ERH692-1805A2 |96169| A| |D|0001 | A|49998|0064579 DRAWING DATA=ERH692-1805A2 |96169| A| |D|0002 | A|49998|0045127 DRAWING DATA=ERH692-1805A2 |96169| A| |D|0003 | A|49998|0064187 DRAWING DATA=ERH692-1805A2 |96169| A| |D|0004 | A|49998|0209005 DRAWING DATA=ERH692-1805A20 |96169| A| |D|0001 | A|49998|0055592 DRAWING DATA=ERH692-1805A20 |96169| A| |D|0001.1 | A|49998|0039945 DRAWING DATA=ERH692-1805A20 |96169| A| |D|0002 | A|49998|0083858 DRAWING DATA=ERH692-1805A20 |96169| A| |D|0003 | A|49998|0065519 DRAWING DATA=ERH692-1805A20 |96169| A| |D|0004 | A|49998|0075278 DRAWING DATA=ERH692-1805A20 |96169| A| |D|0005 | A|49998|0205744 DRAWING DATA=ERH692-1805A20 |96169| A| |D|0006 | A|49998|0134871 DRAWING DATA=ERH692-1805A20 |96169| A| |D|0007 | A|49998|0280400 DRAWING DATA=ERH692-1805A22 |96169| A| |D|0001 | A|49998|0053056 DRAWING DATA=ERH692-1805A22 |96169| A| |D|0001.1 | A|49998|0040743 DRAWING DATA=ERH692-1805A22 |96169| A| |D|0002 | A|49998|0086329 DRAWING DATA=ERH692-1805A22 |96169| A| |D|0003 | A|49998|0155222 DRAWING DATA=ERH692-1805A22 |96169| A| |D|0004 | A|49998|0173328 DRAWING DATA=ERH692-1805A23 |96169| B| |D|0001 | B|49998|0054707 DRAWING DATA=ERH692-1805A23 |96169| B| |D|0002 | B|49998|0059708 DRAWING DATA=ERH692-1805A23 |96169| B| |D|0003 | B|49998|0015391 DRAWING DATA=ERH692-1805A23 |96169| B| |D|0004 | B|49998|0033167 DRAWING DATA=ERH692-1805A23 |96169| B| |D|0005 | B|49998|0029130 DRAWING DATA=ERH692-1805A24 |96169| B| |D|0001 | B|49998|0052935 DRAWING DATA=ERH692-1805A24 |96169| B| |D|0001.1 | B|49998|0021175 DRAWING DATA=ERH692-1805A24 |96169| B| |D|0001.2 | B|49998|0046182 DRAWING DATA=ERH692-1805A24 |96169| B| |D|0001.3 | B|49998|0022405 DRAWING DATA=ERH692-1805A24 |96169| B| |D|0002 | B|49998|0088930 DRAWING DATA=ERH692-1805A24 |96169| B| |D|0003 | B|49998|0170585 DRAWING DATA=ERH692-1805A27 |96169| B| |D|0001 | B|49998|0058457 DRAWING DATA=ERH692-1805A27 |96169| B| |D|0001.1 | B|49998|0050626 DRAWING DATA=ERH692-1805A27 |96169| B| |D|0001.2 | B|49998|0045875 DRAWING DATA=ERH692-1805A27 |96169| B| |D|0001.3 | B|49998|0067842 DRAWING DATA=ERH692-1805A27 |96169| B| |D|0001.4 | B|49998|0040835 DRAWING DATA=ERH692-1805A27 |96169| B| |D|0002 | B|49998|0088669 DRAWING DATA=ERH692-1805A27 |96169| B| |D|0003 | B|49998|0097284 DRAWING DATA=ERH692-1805A27 |96169| B| |D|0004 | B|49998|0170590 DRAWING DATA=ERH692-1805A28 |96169| A| |D|0001 | A|49998|0043965 DRAWING DATA=ERH692-1805A29 |96169| B| |D|0001 | B|49998|0066769 DRAWING DATA=ERH692-1805A29 |96169| B| |D|0001.1 | B|49998|0037115 DRAWING DATA=ERH692-1805A29 |96169| B| |D|0001.2 | B|49998|0046131 DRAWING DATA=ERH692-1805A29 |96169| B| |D|0002 | B|49998|0092560 DRAWING DATA=ERH692-1805A29 |96169| B| |D|0003 | B|49998|0148173 DRAWING DATA=ERH692-1805A29 |96169| B| |D|0004 | B|49998|0237977 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0001 | A|49998|0054329 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0001.1 | A|49998|0041525 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0001.2 | A|49998|0028816 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0002 | A|49998|0088317 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0003 | A|49998|0051068 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0004 | A|49998|0081532 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0005 | A|49998|0073394 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0006 | A|49998|0079885 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0007 | A|49998|0055120 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0008 | A|49998|0060177 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0009 | A|49998|0056586 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0010 | A|49998|0072207 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0011 | A|49998|0050781 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0012 | A|49998|0054895 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0013 | A|49998|0053120 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0014 | A|49998|0055598 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0015 | A|49998|0037341 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0016 | A|49998|0041355 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0017 | A|49998|0014793 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0018 | A|49998|0208431 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0019 | A|49998|0230578 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0020 | A|49998|0227752 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0021 | A|49998|0156401 DRAWING DATA=ERH692-1805A5 |96169| A| |D|0022 | A|49998|0086544 DRAWING DATA=ERH692-1805A6 |96169| A| |D|0001 | A|49998|0052356 DRAWING DATA=ERH692-1805A6 |96169| A| |D|0001.1 | A|49998|0029696 DRAWING DATA=ERH692-1805A6 |96169| A| |D|0002 | A|49998|0061577 DRAWING DATA=ERH692-1805A6 |96169| A| |D|0003 | A|49998|0213053 DRAWING DATA=ERH692-1805A6 |96169| A| |D|0004 | A|49998|0159937 DRAWING DATA=ERH692-1805A6 |96169| A| |D|0005 | A|49998|0081174 DRAWING DATA=ERH692-1805A8 |96169| A| |D|0001 | A|49998|0045984 DRAWING DATA=ERH692-1805A8 |96169| A| |D|0001.1 | A|49998|0029643 DRAWING DATA=ERH692-1805A8 |96169| A| |D|0002 | A|49998|0062370 DRAWING DATA=ERH692-1805A8 |96169| A| |D|0003 | A|49998|0057451 DRAWING DATA=ERH692-1805A8 |96169| A| |D|0004 | A|49998|0058330 DRAWING DATA=ERH692-1805A8 |96169| A| |D|0005 | A|49998|0071878 DRAWING DATA=ERH692-1805A8 |96169| A| |D|0006 | A|49998|0069393 DRAWING DATA=ERH692-1805A8 |96169| A| |D|0007 | A|49998|0234907 DRAWING DATA=ERH692-1805A8 |96169| A| |D|0008 | A|49998|0252467 DRAWING DATA=ERH692-1805A8 |96169| A| |D|0009 | A|49998|0166340 DRAWING DATA=ERH692-1805A9 |96169| A| |D|0001 | A|49998|0061879 DRAWING DATA=ERH692-1805A9 |96169| A| |D|0001.1 | A|49998|0046983 DRAWING DATA=ERH692-1805A9 |96169| A| |D|0001.2 | A|49998|0032606 DRAWING DATA=ERH692-1805A9 |96169| A| |D|0002 | A|49998|0065986 DRAWING DATA=ERH692-1805A9 |96169| A| |D|0003 | A|49998|0088361 DRAWING DATA=ERH692-1805A9 |96169| A| |D|0004 | A|49998|0045642 DRAWING DATA=ERH692-1805A9 |96169| A| |D|0005 | A|49998|0060379 DRAWING DATA=ERH692-1805A9 |96169| A| |D|0006 | A|49998|0060325 DRAWING DATA=ERH692-1805A9 |96169| A| |D|0007 | A|49998|0054999 DRAWING DATA=ERH692-1805A9 |96169| A| |D|0008 | A|49998|0066982 DRAWING DATA=ERH692-1805A9 |96169| A| |D|0009 | A|49998|0061293 DRAWING DATA=ERH692-1805A9 |96169| A| |D|0010 | A|49998|0249722 DRAWING DATA=ERH692-1805A9 |96169| A| |D|0011 | A|49998|0185935 DRAWING DATA=H692-1805A1 |53711| A|ER |D|0001 | A|49998|0124800 DRAWING DATA=H692-1805A108 |53711| A|ER |D|0001 | A|49998|1749473 DRAWING DATA=H692-1805A112 |53711| A|ER |D|0001 | A|49998|1735163 DRAWING DATA=H692-1805A117 |53711| A|ER |D|0001 | A|49998|0336981 DRAWING DATA=H692-1805A36 |53711| A|ER |D|0001 | A|49998|3525344 DRAWING DATA=H692-1805A39 |53711| A|ER |D|0001 | A|49998|2322180 DRAWING DATA=H692-1805A42 |53711| A|ER |D|0001 | A|49998|2129693 DRAWING DATA=H692-1805A45 |53711| A|ER |D|0001 | A|49998|1044520 DRAWING DATA=H692-1805A47 |53711| A|ER |D|0001 | A|49998|0942219 DRAWING DATA=H692-1805A48 |53711| A|ER |D|0001 | A|49998|1147467 DRAWING DATA=H692-1805A49 |53711| A|ER |D|0001 | A|49998|0874778 DRAWING DATA=H692-1805A50 |53711| A|ER |D|0001 | A|49998|2444022 DRAWING DATA=H692-1805A54 |53711| A|ER |D|0001 | A|49998|2038034 DRAWING DATA=H692-1805A60 |53711| E|ER |D|0001 | E|49998|2662465 DRAWING DATA=H692-1805A64 |53711| D|ER |D|0001 | D|49998|0045314 DRAWING DATA=H692-1805A64 |53711| D|ER |D|0002 | D|49998|0046811 DRAWING DATA=H692-1805A64 |53711| D|ER |D|0003 | D|49998|0020837 DRAWING DATA=H692-1805A64 |53711| D|ER |D|0004 | D|49998|0009860 DRAWING DATA=H692-1805A64 |53711| D|ER |D|0005 | D|49998|0014534 DRAWING DATA=H692-1805A64 |53711| D|ER |D|0006 | D|49998|0047048 DRAWING DATA=H692-1805A64 |53711| D|ER |D|0007 | D|49998|0032696 DRAWING DATA=H692-1805A64 |53711| D|ER |D|0008 | D|49998|0035483 DRAWING DATA=H692-1805A64 |53711| D|ER |D|0009 | D|49998|0046901 DRAWING DATA=H692-1805A64 |53711| D|ER |D|0010 | D|49998|0012022 DRAWING DATA=H692-1805A64 |53711| D|ER |D|0011 | D|49998|0033286 DRAWING DATA=H692-1805A64 |53711| D|ER |D|0012 | D|49998|0030524 DRAWING DATA=H692-1805A64 |53711| D|ER |D|0013 | D|49998|0029695 DRAWING DATA=H692-1805A64 |53711| D|ER |D|0014 | D|49998|0031647 DRAWING DATA=H692-1805A64 |53711| D|ER |D|0015 | D|49998|0031818 DRAWING DATA=H692-1805A64 |53711| D|ER |D|0016 | D|49998|0036726 DRAWING DATA=H692-1805A64 |53711| D|ER |D|0017 | D|49998|0021180 DRAWING DATA=H692-1805A73 |53711| A|ER |D|0001 | A|49998|5362927 DRAWING DATA=H692-1805A85 |53711| B|ER |D|0001 | B|49998|1554163 DRAWING DATA=H692-1805A87 |53711| A|ER |D|0001 | A|49998|0271668 DRAWING DATA=H692-1805A88 |53711| A|ER |D|0001 | A|49998|0319661 DRAWING DATA=H692-1805A89 |53711| B|ER |D|0001 | B|49998|0495358 DRAWING DATA=H692-1805A9 |53711| A|ER |D|0001 | A|49998|3105459 DRAWING DATA=H692-1805A90 |53711| B|ER |D|0001 | B|49998|1820669 DRAWING DATA=H692-1805A91 |53711| A|ER |D|0001 | A|49998|1745170 DRAWING DATA=H692-1805A92 |53711| A|ER |D|0001 | A|49998|2236282 DRAWING DATA=H692-1805A95 |53711| A|ER |D|0001 | A|49998|2575036 DRAWING DATA=2625-010X08 |96169| A| |D|0001 | A|49998|0825199 DRAWING DATA=5959311C5 |53711| A|ER |D|0001 | A|49998|0687003 DRAWING DATA=6984058 |53711| A| |D|0001 | A|00026|0000000 DRAWING DATA=7067878 |53711| A| |D|0000.A | A|49998|0055935 DRAWING DATA=7067878 |53711| A| |D|0001 | A|49998|0087250 DRAWING DATA=7067878 |53711| A| |D|0002 | A|49998|0092836 DRAWING DATA=7067878 |53711| A| |D|0003 | A|49998|0013085 DRAWING DATA=7067878 |53711| A| |D|0004 | A|49998|0016641 DRAWING DATA=7067878 |53711| A| |D|0005 | A|49998|0040694 DRAWING DATA=7067878 |53711| A| |D|0006.1 | A|49998|0082343 DRAWING DATA=7067878 |53711| A| |D|0006.2 | A|49998|0073258 DRAWING DATA=7067878 |53711| A| |D|0006.3 | A|49998|0094913 DRAWING DATA=7067878 |53711| A| |D|0006.4 | A|49998|0022877 DRAWING DATA=7067878 |53711| A| |D|0006.5 | A|49998|0046043 DRAWING DATA=7067878 |53711| A| |D|0007.01 | A|49998|0034852 DRAWING DATA=7067878 |53711| A| |D|0007.02 | A|49998|0063518 DRAWING DATA=7067878 |53711| A| |D|0007.03 | A|49998|0065396 DRAWING DATA=7067878 |53711| A| |D|0007.04 | A|49998|0067087 DRAWING DATA=7067878 |53711| A| |D|0007.05 | A|49998|0066694 DRAWING DATA=7067878 |53711| A| |D|0007.06 | A|49998|0064384 DRAWING DATA=7067878 |53711| A| |D|0007.07 | A|49998|0063971 DRAWING DATA=7067878 |53711| A| |D|0007.08 | A|49998|0075575 DRAWING DATA=7067878 |53711| A| |D|0007.09 | A|49998|0061690 DRAWING DATA=7067878 |53711| A| |D|0007.10 | A|49998|0049467 DRAWING DATA=7067878 |53711| A| |D|0007.11 | A|49998|0038500 DRAWING DATA=7067878 |53711| A| |D|0008.1 | A|49998|0035321 DRAWING DATA=7067878 |53711| A| |D|0008.2 | A|49998|0043555 DRAWING DATA=7067878 |53711| A| |D|0008.3 | A|49998|0014656 DRAWING DATA=7067878 |53711| A| |D|0009 | A|49998|0258332 DRAWING DATA=7067878 |53711| A| |D|0010 | A|49998|0266122 DRAWING DATA=7067878 |53711| A| |D|0011 | A|49998|0292941 DRAWING DATA=7067878 |53711| A| |D|0012 | A|49998|0489518 DRAWING DATA=7067878 |53711| A| |D|0013 | A|49998|0187950 DRAWING DATA=7067878 |53711| A| |D|0014 | A|49998|0112705 DRAWING DATA=7067878 |53711| A| |D|0015 | A|49998|0138164 DRAWING DATA=7067878 |53711| A| |D|0016 | A|49998|0214006 DRAWING DATA=7067878 |53711| A| |D|0017 | A|49998|0169091 DRAWING DATA=7067878 |53711| A| |D|0018 | A|49998|0173572 DRAWING DATA=7067878 |53711| A| |D|0019 | A|49998|0134953 DRAWING DATA=7067878 |53711| A| |D|0020 | A|49998|0173655 DRAWING DATA=7067878 |53711| A| |D|0021 | A|49998|0277216 DRAWING DATA=7067878 |53711| A| |D|0022 | A|49998|0181070 DOCUMENT REF DATA=FED-STD-H28 | | |B |190424|A| | | DOCUMENT REF DATA=FED-STD-H28 |0020| |B |941221|A| |01| DOCUMENT REF DATA=ANSI/ASQ Z1.4 | | | |080101|A| | | DOCUMENT REF DATA=ASTM-B150 | | | |190401|A| | | DOCUMENT REF DATA=QQ-N-281 | | |D |851023|A|2 | | DOCUMENT REF DATA=QQ-N-286 | | |G |001207|A| | | DOCUMENT REF DATA=ASTM-B369 | | | |200401|A| | | DOCUMENT REF DATA=MIL-STD-792 | | |F |060519|A| | | DOCUMENT REF DATA=MIL-DTL-1222 | | |J |001208|A| | | DOCUMENT REF DATA=ASTM-E1417 | | | |160615|A| | | DOCUMENT REF DATA=ASTM-E1444 | | | |160601|A| | | DOCUMENT REF DATA=MIL-STD-2035 | | |A |950515|A| | | DOCUMENT REF DATA=MIL-STD-2132 | | |D |080310|F| |01| DOCUMENT REF DATA=ASTM-D4066 | | | |130701|A| | | DOCUMENT REF DATA=ISO_9001 | | | |081115|A| | | DOCUMENT REF DATA=ISO10012 | | | |030415|A| | | DOCUMENT REF DATA=MIL-DTL-15024 | | |G |180303|A| | | DOCUMENT REF DATA=MIL-C-15726 | | |F |911008|A|1 | | DOCUMENT REF DATA=ISO/IEC 17025 | | | |050515|A| | | DOCUMENT REF DATA=QPL 25027 |0017| | |000207|A| | | DOCUMENT REF DATA=MIL-I-45208 | | |A |810724|A|1 | | DOCUMENT REF DATA=MIL-STD-45662 | | |A |880801|A| | | DOCUMENT REF DATA=A-A-59004 | | |B |081118|A| | | DOCUMENT REF DATA=ANSI/NCSL Z540.3 | | | |130326|A| | | DOCUMENT REF DATA=0900-LP-001-7000 | | | |810101|C| |01| DOCUMENT REF DATA=AIA/NAS NASM 17828 | | |1 |130430|A| | | DOCUMENT REF DATA=AIA/NAS NASM 25027 | | |1 |121221|A| | | DOCUMENT REF DATA=S9074-AQ-GIB-010/248 | | |1 |191112|A| | | DOCUMENT REF DATA=T9074-AS-GIB-010/271 | | |1 |140911|A| | | DOCUMENT REF DATA=S9074-AR-GIB-010A/278 (CHG A) | | | |130214|A| | | 3. REQUIREMENTS 3.1 ;Complete Tank Assembly, to be in accordance with NAVSEA drawing 595-7067878, Assembly A10/A11, and all Engineering Reports included with this contract/purchase order, except as amplified or modified herein.; 3.2 ;The correct width of the O-ring groove shown in detail view 21-3D of NAVSEA drawing 7067878 is .375/.385 inches.; 3.3 ;Wiper Strip, Part 18, must be in accordance with NAVSEA drawing 803-5959311 Note 2 K (3) (E) and Engineering Report ER5959311C5.; 3.4 Material for Parts Requiring Certification - Quantitative chemical and mechanical analysis is required for the parts listed below unless specifically stated otherwise: Part - ;Body, Tank, Part 43; Flange, Tank, Part 44; Flange, Tank, Part 45; Material - ;ASTM-B369, UNS C96400; Part - ;Rod, Tail, Part 46; Material - ;ASTM-B150, C63200; Part - ;Threadpiece, Union, Part 51; Material - ;MIL-C-15726, Alloy C71500, Form Rod,Temper 060; Part - ;Stud, Parts 47, 53, and 54; Material - ;MIL-DTL-1222, Type IV, Grade 500, QQ-N-286, Annealed and Age Hardened; PART - ;Nut, Hex, Self-Locking, Parts 48 and 50; MATERIAL - QQ-N-281, class A annealed (hot finished or cold drawn) or class B cold drawn. All material must be from the same class. SELF-LOCKING ELEMENT- ASTM-D4066, Group 01, Class 1, Grade 1 3.5 Testing Certification - Certifications are required for the following tests on the items listed below. Additional testing on other piece parts (if any) per applicable drawings and specifications is still required, but certifications are only required as listed below. Test - Non-Destructive Tests Item - ;Weld Repair (as applicable); Performance - Per applicable fabrication specification Acceptance - Per applicable fabrication specification Test - Quality Conformance Tests Item - Self-Locking Nuts Performance - ;NASM25027; Acceptance - ;NASM25027; Attribute - Certificate of Completion Item - Self-Locking Nut Nonmetallic Insert Performance - ;ASTM-D4066, Group 01, Class 1, Grade 1; Attribute - Certificate of Compliance Item - Self-Locking Nuts Performance - This Certificate must state that self-locking nuts were manufactured by an approved source. Approved sources are those listed on QPL-25027 for the appropriate fastener. This QPL may also be considered as approved sources for Heavy Hex self-locking nuts. Test - Ultrasonic Inspection on Starting Material Item - ;All Items requiring certification made from QQ-N-286 with a diameter or minimum distance between parallel surfaces of 4 inches or greater of the starting material, or when required by a drawing or specification invoked elsewhere in this contract; Performance - T9074-AS-GIB-010/271 or MIL-STD-2132, and QQ-N-286 Acceptance - QQ-N-286 Attribute - Annealing and Age Hardening Item - ;Stud, Parts 47, 53, and 54; Performance - QQ-N-286 Test - ;Liquid Penetrant Inspection; Item - ;Stud, Parts 47, 53, and 54; Performance - T9074-AS-GIB-010/271; Sampling must be per MIL-DTL-1222 Acceptance - MIL-DTL-1222 Test - ;Dye Penetrant Inspection for Non-Magnetic Grades; Item - ;Nut, Hex, Self-Locking, Parts 48 and 50; Performance - T9074-AS-GIB-010/271 or ASTM-E1417/ASTM-E1444 (Method C solvent removal techniques must not be used on thread) Acceptance - ;NASM25027; Test - Weldability Test of ASTM-B369 material Item - ;Body, Tank, Part 43; Flange, Tank, Part 44; Flange, Tank, Part 45; Performance - ASTM-B369 Acceptance - ASTM-B369 Test - Pressure Tests Item - Each Assembly Performance - ;General Notes 7012 & 7013 of Drawing 7067878; Acceptance - ;General Notes 7012 & 7013 of Drawing 7067878; Test - 5x Visual Magnification or Dye Penetrant Inspection (root layer) Item - Weldments Performance - T9074-AS-GIB-010/271 Acceptance - MIL-STD-2035 Test - Visual and Dye Penetrant Inspection (final layer) Item - Weldments Performance - T9074-AS-GIB-010/271 Acceptance - MIL-STD-2035 3.6 Radiography is required on ;Body, Tank, Part 43; Flange, Tank, Part 44; Flange, Tank, Part 45; Joint J0003; and Joint J0004. Radiography is required for weldments and must be identified to the weld joint; . 3.7 The pressure tolerance must be as specified in the assembly drawing, detail drawing, design specification or elsewhere in this contract. Where pressure tolerances are not provided by drawings, specifications or specified elsewhere in this contract, the following must be used: For pressure tests below 100 PSIG, the pressure tolerance must be +1 PSIG / -0 PSIG. For pressure tests at or above 100 PSIG up to and including 2500 PSIG, the pressure tolerance must be +2% / -0 PSIG rounded off to the nearest multiple of the smallest graduation on an analog test pressure gauge, not to exceed 50 PSIG. For pressure tests above 2500 PSIG, the pressure tolerance must be +2% / -0 PSIG, rounded off to the nearest multiple of the smallest graduation on an analog test pressure gauge, not to exceed 200 PSIG. The pressure test time tolerance must be as specified in the assembly drawing, detail drawing, design specification or elsewhere in this contract. Where pressure test time tolerances are not provided by drawings, specifications or specified elsewhere in this contract, the following must be used: For a test duration up to and including 1 hour, the tolerance must be +5 minutes / - 0 minutes. For a test duration of more than 1 hour up to and including 24 hours, the tolerance must be +30 minutes / - 0 minutes. For a test duration of more than 24 hours, the tolerance must be +60 minutes / - 0 minutes. 3.8 Confidential Hydrostatic Test Pressures - When test pressures are confidential, certification must reference ;6984058 Rev A; and the item number to which the item was tested in lieu of the actual pressures. Any drawing requirement to mark the working pressure on the item does not apply and is strictly prohibited. 3.9 Specification Change - For QQ-N-281, Class B material: 1 - Footnote 9 to Table II of QQ-N-281 does not apply. 2 - When starting material is Round Bar greater than 3"" dia, the mechanical properties of Hex Bar apply. 3.10 K-MONEL Fasteners - Material must be heat treated per QQ-N-286. 3.10.1 Fasteners that have been hot or cold headed or roll threaded must be solution annealed followed by age hardening subsequent to all heading and thread rolling operations. The mechanical properties on certifications must be actual properties of the annealed and age hardened material and must meet the requirements of QQ-N-286. 3.10.2 QQ-N-286 fasteners that have been headed and/or roll threaded must not beage hardened unless the material has been solution annealed subsequent to the heading and threading operations. Threads formed after the final age hardening heat treatment must be cut or ground only. 3.11 K-MONEL Fasteners -K-MONEL externally threaded fasteners must have mechanical properties determined in accordance with MIL-DTL-1222. Test results must include Tensile, Yield, Elongation and Hardness as required by MIL-DTL-1222. (The Hardness tests must be performed on a full size fastener.) 3.11.1 Studs require an Axial Tensile test in accordance with MIL-DTL-1222. 3.11.2 Headed fasteners require a Wedge Tensile test as specified elsewhere in this contract/purchase order. 3.12 Thread Forming - The following provides the official interpretation of paragraph 4.5.2.7 of MIL-DTL-1222. 3.12.1 In order to qualify for ""Alternate Mechanical Testing"" found in MIL-DTL-1222J paragraph 4.5.2.7 and utilize the mechanical properties for the starting bar stock in lieu of performing yield strength or proof stress testing on finished fasteners, all of the subsequent provisions found in MIL-DTL-1222J paragraphs 4.5.2.7 a through e must be met. If any single provision is not met, all required mechanical testing must be performed on the finished full sized fasteners. These provisions are explained as follows: a. Proper product lot control and traceability must be in place. b. No heat treatment (including hot heading and hot forming), cold forming, drawing, rolling and thread rolling may be performed on the starting bar, fastener blanks or finished fasteners after the completion of the mechanical testing on the starting bar. c. and d. The proper size starting bar must be selected to ensure mechanical properties of finished fasteners are represented by the mechanical properties of the starting bar. e. The mandatory testing, axial tensile (studs) and wedge tensile (screws and bolts) must be performed on full sized fasteners. Note that there is a typographical error in paragraph 4.5.2.7 and that the axial load test is a mandatory test that must be performed on studs as required in paragraph 4.5.2.7.e. 3.12.2 Thread rolling is a cold working process and is not considered to be a machining or grinding operation. Therefore, fasteners...
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/961e3c5a70c741c3a499543e85d6b19f/view)
 

Record

SN07313883-F 20250117/250115230103 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |