SOURCES SOUGHT
42 -- BREATHING APPARATUS NSN: 4240-01-542-8156
- Notice Date
- 1/15/2025 5:21:26 AM
- Notice Type
- Sources Sought
- NAICS
- 315990
— Apparel Accessories and Other Apparel Manufacturing
- Contracting Office
- DLA TROOP SUPPORT PHILADELPHIA PA 19111-5096 USA
- ZIP Code
- 19111-5096
- Solicitation Number
- 7001739692
- Response Due
- 2/15/2025 12:30:00 PM
- Archive Date
- 03/02/2025
- Point of Contact
- John Lieb, Phone: 2157370815
- E-Mail Address
-
john.lieb@dla.mil
(john.lieb@dla.mil)
- Description
- This is a Sources Sought Notice only. This is NOT a Request for Proposal or Request for Quote. No Solicitation Number has been assigned at this time. DLA Troop Support is seeking to identify possible sources who can supply the below item: BREATHING APPARATUS RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers and Non-Manufacturers RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES PER OEM US DIVERS AQUA LUNG LETTER, DATED 1 NOV 11, AERIAL MACHINE AND TOOL/CAGE 70133 IS THE APPROVED DISTRIBUTOR FOR SUBJECT NSN AND PART NUMBER. US DIVERS IS STILL THE MFG. THE MARKING REQUIREMENTS SHALL HAVE US DIVERS CAGE AND PART NUMBER IDENTIFIED ALONG WITH AERIAL'S CAGE AND CONTRACT NUMBER FOR TRACEBILITY. PER AQUA LUNG LETTER, TRANSAERO INC/CAGE 27541 IS AN AUTHORIZED DISTRIBUTOR OF AVIATION AND TACTICAL EQUIPMENT FROM AQUA LUNG FOR SUBJECT NSN AND PART NUMBER. THE MARKING REQUIREMENTS SHALL HAVE US DIVERS CAGE AND PART NUMBER IDENTIFIED ALONG WITH TRANSAERO'S CAGE AND CONTRACT NUMBER FOR TRACEBILITY WHEN THE PURCHASE ORDER TEXT (POT) DESCRIBES THE REQUIRED PRODUCT(S) BY NAME AND PART NUMBER OF A SPECIFIC ENTITY, BY THE NAMES AND PART NUMBERS OF A NUMBER OF SPECIFIC ENTITIES, OR BY THE NAME(S) AND PART NUMBER(S) OF SPECIFIC ENTITY/ENTITIES AS MODIFIED BY ADDITIONAL REQUIREMENTS SET FORTH IN THE POT, ONLY THAT/THOSE PRODUCT(S) HAVE BEEN DETERMINED TO MEET THE NEEDS OF THE GOVERNMENT AND ARE ACCEPTABLE. SUCH PRODUCT(S) ARE ""EXACT PRODUCT(S)"" AS DEFINED IN ""DLAD 52.217-9002, CONDITIONS FOR EVALUATION AND ACCEPTANCE OF OFFERS FOR PART NUMBERED ITEMS."" A VENDOR OFFER/QUOTATION, ""BID WITHOUT EXCEPTION,"" IS A CERTIFICATION THAT THE ""EXACT PRODUCT,"" MANUFACTURED AND/OR SUPPLIED BY ONE OF THE ENTITIES CITED IN THE POT WILL BE FURNISHED UNDER THE CONTRACT OR ORDER. ANY PRODUCT NOT MANUFACTURED AND/OR SUPPLIED BY ONE OF THE ENTITIES CITED IN THE POT IS AN ""ALTERNATE PRODUCT,"" EVEN THOUGH IT MIGHT BE MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATIONS OF ONE OF THE ENTITIES CITED IN THE POT. IF AN ALTERNATE PRODUCT IS FURNISHED UNDER A CONTRACT OR ORDER FOR AN EXACT PRODUCT, THE ALTERNATE PRODUCT WILL BE AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT. ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE OFFERS IS NOT AVAILABLE AT THE PROCUREMENT AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM (CSI) . ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND APPROVAL. . ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER. Hazard Communication Standard Notice: Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities. The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels. In accordance with the revised standard after June 1, 2015: 1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government. 2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government. 3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200. For more information on SDS, refer to OSHAs website, available at: https://www.osha.gov/law-regs.html For information on 29 C.F.R. 1910.1200, refer to the below link: https://www.osha.gov/dsg/hazcom/index.html IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM (CSI). ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND APPROVAL. . ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER. CRITICAL APPLICATION ITEM AQUALUNG USA, INC 94120 P/N 108445 PKGING DATA - MIL-STD-2073-1E QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10 OPI:O INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/bfd8223cf7a946f1a8a075004ee971ef/view)
- Place of Performance
- Address: New Cumberland, PA, USA
- Country: USA
- Country: USA
- Record
- SN07314380-F 20250117/250115230107 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |