SOURCES SOUGHT
42 -- ADAPTER,AMPLIFIER NSN: 4240-01-543-0981
- Notice Date
- 1/15/2025 5:19:26 AM
- Notice Type
- Sources Sought
- NAICS
- 339113
— Surgical Appliance and Supplies Manufacturing
- Contracting Office
- DLA TROOP SUPPORT PHILADELPHIA PA 19111-5096 USA
- ZIP Code
- 19111-5096
- Solicitation Number
- 7006653775
- Response Due
- 2/15/2025 12:30:00 PM
- Archive Date
- 03/02/2025
- Point of Contact
- John Lieb, Phone: 215-737-0815
- E-Mail Address
-
john.lieb@dla.mil
(john.lieb@dla.mil)
- Description
- This is a Sources Sought Notice only. This is NOT a Request for Proposal or Request for Quote. No Solicitation Number has been assigned at this time. DLA Troop Support is seeking to identify possible sources who can supply the below item: ADAPTER, AMPLIFIER RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR) RD002, COVERED DEFENSE INFORMATION APPLIES RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES MIL-STD-130N(1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY THIS IS A SOURCE CONTROLLED ITEM WHICH MUST BE MANUFACTURED AND TESTED IN ACCORDANCE WITH THE CITED LIMITED RIGHTS DATA. THE GOVERNMENT CAN- NOT PROVIDE THE DATA. ONLY THOSE VENDORS WHO HAVE ACCESS TO THE DATA OR CAN PROVIDE TRACE- ABILITY TO THE APPROVED SOURCES SHOULD QUOTE. SAR PACKAGE IS REQUIRED IF YOUR COMPANY IS CONSIDERING SOURCE APPROVAL. SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/Logistics-Operations/Enhanced-Validation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ003: CONFIGURATION CHANGE MANAGEMENT FOR EDGEWOOD FOR CHEMICAL, BIOLOGICAL CENTER MATERIALS - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) This material will be for supplies or services used to facilitate defense against or recovery from chemical, biological, radiological or nuclear (CBRN) attack. Special procurement procedures apply. MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers and Non-Manufacturers CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. UNLESS OTHERWISE NOTED FIRST ARTICLE TESTING IS REQUIRED PRODUCTION LOT TEST REPORT MUST BE APPROVED BY DLA TROOP SUPPORT PRIOR TO CONTRACT DELIVERY. NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED DRAWING AND AS OF THE DATE OF THIS SOLICITATION ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED PART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST MEET THE REQUIREMENTS OF THE CITED DRAWING. OFFERORS WHO ARE INTERESTED IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE ACQUISITION MUST CONTACT THE COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED DRAWING. ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT THIS TIME. No shelf life markings are required. Cage Code: 1LEW5 Avon Protection Systems, Inc. 503 8th Street Cadillac, MI 49601-9282 Contractor first article/preproduction approval testing required. Use DI-NDTI-80809B in preparation of the first article report. Current revision of MIL-HDBK-831 may also be used for report format guidance. First article testing shall be conducted IAW applicable drawings and drawing notes, specification, engineering instructions and specific requirements set forth in the contract. Additionally, 100% dimensional characteristics check shall be performed and results provided to the contracting officer. The first article offered must be manufactured at the facilities in which production quantities are procured under the contract. Contractor shall provide a statement along with objective evidence that test and production items meet the material and process requirements of the contract. If applicable, DD form 1423 documentation shall be provided as required. Unless F.A.T sample(s) is degraded or destroyed in testing or submitted for government fit, form, function verification (when specified by contract), the F.A.T. samples(s) may be deliverable with the last production run of the contract. Additional Wide Area Workkflow (WAWF) instructions for contractor first article test CLIN: The contractor shall code the receiving report for contractor first article test CLIN in WAWF as follows: A. Inspection at origin (source)- Enter the DCMA DODAAC listed on page 1 of the contract. B. Acceptance at destination- Enter the issue by office DODAAC listed C. Ship to code - Enter the issue by office DODAAC listed on page 1 of the contract. Top drawing is source controlled. Buyers must (I) list military and vendor part number(s) in the solicitation, and (II) incorporate attached drawings into the contract. Source(s) must conform OTHER LOT Numbering Applies The Contractor shall provide standardized lot numbers on all Amplifiers, identifying the production run during which the units wereproduced. A copy of the records from the production runs shall be maintained by the Contractor for Government review, as requested,for a minimum time period of two years. to the drawing requirements. (CS120) LOT NUMBERINGThe Contractor shall provide standardized lot numbers on all amplifier adapters, identifying the production run during which the units were produced. A copy of the records from the production runs shall be maintained by the contractor for government review as requ ested, for a minimum time period of two years. Government Furnished Property (GFP) There is no GFP on this contract. SECTION C - ENGINEERING EXCEPTIONS The following Engineering Exceptions shall apply to this procurement: ANSI MH1, if required, can be obtained on the Material Handlers Institute of America's website, www.mhi.org, referenced simply as MH1. The standard is available at no cost, but free registration on the site is required to obtain the document. SOURCE CONTROL / VENDOR ITEM VERIFICATION: Drawing No. Date Vendor Part No. Verified ATTACHED DOCUMENTATION Yes Not Applicable CERTIFICATION This is an identified Chemical Biological Defense Equipment item. All packaged items of supply shall be marked IAW MIL-STD-129. Military packaging is required. Requirements defining levels of packaging shall be IAW MIL-STD-2073-1. If Special Packaging Instructions (SPI) are provided in the technical data package (TDP), the SPI�s requirements will take precedence over MIL-STD-2073-1 where applicable. For all Chemical Biological Items, the First Article Test (FAT) waiver timeframe is reduced to one (1) year. The use of the Army Combat Capabilities Development Command Chemical Biological Center DEVCOM CBC Form 081 is required for all First Article Test waivers, (note: do not use a DD Form 1694 �Request for Variance (or Waiver)� for a FAT waiver). Include RQ038 in the Material Master for all Chemical Biological Items. This supersedes the three (3) year waiver time frame allowed in Procurement Note H03- Supplemental First Article Testing Requirements. CRITICAL APPLICATION ITEM AVON PROTECTION SYSTEMS INCORPORATED 1LEW5 P/N 71009/6 IAW BASIC DRAWING NR 81361 5-1-4337 REVISION NR DTD 01/15/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 81361 5-1-4337 REVISION NR DTD 03/12/2024 PART PIECE NUMBER: IAW REFERENCE QAP 81361 5-1-4337 REVISION NR A DTD 01/25/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 81361 5-1-4337 REVISION NR A DTD 06/03/2020 PART PIECE NUMBER: IAW REFERENCE QAP 14153 SQAP-FAT3 REVISION NR DTD 06/15/2022 PART PIECE NUMBER: IAW REFERENCE QAP 14153 SQAP-015430981 REVISION NR DTD 10/25/2022 PART PIECE NUMBER: IAW REFERENCE QAP 14153 SQAP-015430981 REVISION NR DTD 04/01/2024 PART PIECE NUMBER: IAW REFERENCE QAP 14153 SQAP-015430981 REVISION NR DTD 06/20/2024 PART PIECE NUMBER: PKGING DATA - MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z UNIT CONT:ZZ OPI:A INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS SUPPLEMENTAL INSTRUCTIONS: -PLACE A RED X AND THE WORDS #SHORT BOX# ON THE FRONT OF ANY BOX THAT HAS A SHORT QUANTITY, THEN PLACE THAT BOX/BOXES WITH THE MARKINGS SHOWING ON THE TOP FRONT OF THE PALLET LOAD.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/3c1211dba853403bbc992a2401d64199/view)
- Place of Performance
- Address: New Cumberland, PA, USA
- Country: USA
- Country: USA
- Record
- SN07314383-F 20250117/250115230107 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |