SOLICITATION NOTICE
43 -- Dust Collection System 20HP 3PH 460V
- Notice Date
- 8/26/2025 12:44:19 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333413
— Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing
- Contracting Office
- W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
- ZIP Code
- 13602-5220
- Solicitation Number
- W911S225U1788
- Response Due
- 9/2/2025 12:30:00 PM
- Archive Date
- 08/26/2026
- Point of Contact
- Tamika Craig, Phone: 7065453313, Charles P. Tippie, Phone: 706-545-6162
- E-Mail Address
-
tamika.g.craig.civ@army.mil, charles.p.tippie.civ@army.mil
(tamika.g.craig.civ@army.mil, charles.p.tippie.civ@army.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- Dust Collection System 20HP 3PH 460V SolicitationDust Collection System 20HP 2460V Direct Drive Industrial 110 Gal. Cyclone Dust Collector. Industrial dust control solution for commercial shops collecting dust from multiple tools at once. Includes heavy-gauge, full welded steel cyclone separator with neutral vane inlet. Features robust U.S. made motor with welded carbon steel impeller. Angle iron telescoping stand mounts the system in a compact footprint with dual 55 gallon dust bins, XXK200346A or Equal. Horsepower: 20 hp; Motor Type: U.S. TEFC Motor; Motor Service Factor: 1.15; Voltage: 460V; Motor FLA: 23A; Phase Option: Three-Phase (Pre-Wired); Frequency: 60Hz; Power Connector Type: 4 Bare Wires (Bare Wiring, Three Hot and Ground); Impeller Type: Backward inclined, welded carbon steel; Impeller Size: 18 in Dia.; Real CFM Rating: 6,646 Actual CFM at 2.7 in. S.P.; Noise Level: 82 dBA @ 10 ft; Motor Speed Type: Fixed; Filter Type: Izumi Axtar Spunbond Media; Filtration Efficiency: 99.9% at 0.3?2.0 microns (with seasoned filter); Replacement Filter: FCK186200; Waste Capacity: 110 Gallons; Primary Build Materials: Cold Rolled Steel; Welding: Seam Welded; Static Resistance Rating: Conductive (Metal); Color: White; Inlet Size: Round: 16 in. Dia., Square ID: 9-7/8 in (W) x 20 in (H) with 1-1/4 in Flange; Outlet Size: Round: 16 in Dia. and Square ID: 20 in (W) x 12-3/4 in (H) with 1-3/4 in Flange; Discharge Size: 14 in ID Flange; Width: 62 in; Depth: 62 in , Height: 179 in; Height to Center of Inlet: 136.5 in; Actual Weight (lbs): 2160 lbs; Contents: Blower Motor Assembly, Magnetic Starter, Fan Housing, Cyclone Separator, Square-to-Round Inlet Adapter, Angle Iron Stand, 2x Dust Bins, Hardware; Manufacturer Statement: Made in USA; Warranty Information: 2 Year Limited Warranty; Certifications: NFPA Compliance Ready; cETLus certified to both U.S. and Canadian product safety standards by an NRTL. Conforms to UL-1017 and Can/CSA-C22.2 No. 243 standards. Additional Supplies and Equipment: 1 each Filter plenum assembly (FXK041501A or Equal) is to be included, along with 2 each Flex Hoses 4 inch Diameter precut 25 foot length (DHF042500 or Equal), 1 each Flex Hose 4 inch Diameter precut 10 foot length (DHF041000 or Equal), 1 each Flex Hose 5 inch Diameter precut 10 foot length (DHF051000 or Equal), 1 each Flex Hose 6 inch Diameter precut 10 foot length (DHF061000 or Equal) , 1 each Flex Hose 6 inch Diameter precut 5 foot length (DHF060500 or Equal), 2 each 4 inch Diameter Spiral Adapters (DAS040000 or Equal), 1 each 6 inch Diameter Spiral Adapter (DAS060000 or Equal), 1 Reducer 5 to 4 inch (DRL050400 or Equal), 30 each 6-8 inch Diameter Clamp Bands (ACB080000 or Equal) and Freight. 45 days or less Lead Time.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/69eb640953de4462a4ab658acf78459c/view)
- Place of Performance
- Address: Training Support Center - Tamika Craig5251 Smiley Court, Bldg 3020Fort Benning, GA 31905 31905
- Zip Code: 31905
- Zip Code: 31905
- Record
- SN07567085-F 20250828/250826230048 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |