SPECIAL NOTICE
48 -- 2 Low Flow Operators for ACS
- Notice Date
- 8/28/2025 12:28:46 PM
- Notice Type
- Justification
- NAICS
- 332911
— Industrial Valve Manufacturing
- Contracting Office
- W072 ENDIST HUNTINGTON HUNTINGTON WV 25701-5000 USA
- ZIP Code
- 25701-5000
- Solicitation Number
- W9123725QA058
- Archive Date
- 09/27/2025
- Point of Contact
- Travis Adkins, Phone: 3043995099, Philip S. Davis, Phone: 3043995297
- E-Mail Address
-
travis.c.adkins@usace.army.mil, philip.s.davis@usace.army.mil
(travis.c.adkins@usace.army.mil, philip.s.davis@usace.army.mil)
- Award Number
- W9123725QA058
- Award Date
- 09/05/2025
- Description
- The Contractor shall furnish, test, and deliver Two (2) low flow gate operator as described herein to Alum Creek Lake, 5905 Lewis Center Rd., Lewis Center, OH 43035-9215. The new operators must be an exact drop-in match for the existing gate operators currently in use and have the exact performance criteria as the originals. Each low flow gate operator shall be manufactured by Limitorque and include the electric actuator, enclosure, controls, position indication, drive, base, starter, and handwheel as detailed below for a complete motor operated floor stand. The units are to be used to operate a low flow gates on the Alum Creek Dam intake structure. Contractor must install a handwheel on each unit for manual operation. Remote operation for each unit must be successfully checked at the Contractor�s facility during witness testing. It is recommended for the Contractor to make a site visit to conform the operators they are providing are an exact match to the operators being replaced and to get any details needed to ensure successful remote operation of the gates.The Contractor shall furnish, test, and deliver Two (2) low flow gate operator as described herein to Alum Creek Lake, 5905 Lewis Center Rd., Lewis Center, OH 43035-9215. The new operators must be an exact drop-in match for the existing gate operators currently in use and have the exact performance criteria as the originals. Each low flow gate operator shall be manufactured by Limitorque and include the electric actuator, enclosure, controls, position indication, drive, base, starter, and handwheel as detailed below for a complete motor operated floor stand. The units are to be used to operate a low flow gates on the Alum Creek Dam intake structure. Contractor must install a handwheel on each unit for manual operation. Remote operation for each unit must be successfully checked at the Contractor�s facility during witness testing. It is recommended for the Contractor to make a site visit to conform the operators they are providing are an exact match to the operators being replaced and to get any details needed to ensure successful remote operation of the gates.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/a27ff3ef1cb848c5bee15dd40cbc8a8f/view)
- Place of Performance
- Address: Lewis Center, OH 43035, USA
- Zip Code: 43035
- Country: USA
- Zip Code: 43035
- Record
- SN07570550-F 20250830/250828230046 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |