SAMDaily.us | PRESOL | 43 | Intent to Solicit one source for one (1) pair of press platens to be manufactured and installed to replace damaged platens on a Collin Lab and Pilor Solutions GmbH manufactured Press 500 S equipment.

SAMDAILY.US - ISSUE OF AUGUST 30, 2025 SAM #8678
SOLICITATION NOTICE

43 -- Intent to Solicit one source for one (1) pair of press platens to be manufactured and installed to replace damaged platens on a Collin Lab and Pilor Solutions GmbH manufactured Press 500 S equipment.

Notice Date: 8/28/2025 9:57:19 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 333248 —
Contracting Office: W6QK ACC-APG ADELPHI ADELPHI MD 20783-1197 USA
ZIP Code: 20783-1197
Solicitation Number: W911QX25Q0111
Response Due: 9/5/2025 8:59:00 AM
Archive Date: 09/20/2025
Point of Contact: Nyshaun Greene, Phone: 5206915586, Zachary Dowling, Phone: 5206729587
E-Mail Address: nyshaun.s.greene.civ@army.mil, zachary.a.dowling2.civ@army.mil
(nyshaun.s.greene.civ@army.mil, zachary.a.dowling2.civ@army.mil)
Description: DEVCOM ARL requires a pair of press platens to replace damaged platens on the Collin Press 500 S equipment owned by Sciences of Extreme Materials Division, Polymers Branch. The following are required: Shall have one (1) pair (one upper and one lower) of press platens The platens shall be compatible with existing Collin Press 500 S equipment and shall have the ability to be directly installed. The platens shall be compatible with the existing control system of the Collin Press 500 S, such that the onboard control system can control heating and cooling of the press platens. The platens shall be capable to withstand 2000N force on a 7� x 7� mold, while using a 1� thick steel caul plate measuring 18� x 18� without damage or permanent deformation The platens shall be capable to withstand the above pressure conditions through repeated press cycles from room temperature up to 450oCelsius. The upper and lower platens shall be capable of independent temperature control Shall include on-site installation, start up, and training after the parts have been installed.
Web Link: SAM.gov Permalink
(https://sam.gov/opp/0704d306f93542509565db65822efcde/view)
Place of Performance: Address: Aberdeen Proving Ground, MD 21005, USA; Zip Code: 21005; Country: USA
Record: SN07571385-F 20250830/250828230052 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

43 -- Intent to Solicit one source for one (1) pair of press platens to be manufactured and installed to replace damaged platens on a Collin Lab and Pilor Solutions GmbH manufactured Press 500 S equipment.