SOLICITATION NOTICE
65 -- MANOSCAN ESO X1 CATHETERS OR EQUAL
- Notice Date
- 9/16/2025 10:19:02 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 339112
— Surgical and Medical Instrument Manufacturing
- Contracting Office
- 262-NETWORK CONTRACT OFFICE 22 (36C262) Gilbert AZ 85297 USA
- ZIP Code
- 85297
- Solicitation Number
- 36C26225Q1510
- Response Due
- 9/29/2025 10:00:00 AM
- Archive Date
- 10/29/2025
- Point of Contact
- Jonathan C. Ford, Contracting Officer, Phone: -
- E-Mail Address
-
Jonathan.Ford1@va.gov
(Jonathan.Ford1@va.gov)
- Small Business Set-Aside
- SDVOSBC Service-Disabled Veteran-Owned Small Business Set Aside
- Awardee
- null
- Description
- (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. (ii) The solicitation number 36C26225Q1510 is issued as a Request for Quotation (RFQ) in conjunction with FAR -- Part 13 Simplified Acquisition Procedures and constitutes the only solicitation. The Government intends to award a single Firm-Fixed Price (FFP) award contract. (iii) The provisions and clauses in this document are in effect through the Federal Acquisition Circular 2025-03. (iv) This solicitation intends to award a contract through a SDVOSB set-aside; open market, to a business associated with NAICS North American Industrial Classification System Code 399112 with a size standard of 1,000 employees. (v) See Attachment A Schedule for a list of line item numbers, items, quantities and units of measure. (vi) See Attachment B for The Salient Characteristics for the items being requested. This includes the warranty information. (vii) The Department of Veterans Affairs (VA) seeks a contractor to provide is seeking potential sources capable of supplying (2) Manoscan ESO Catheters X1 (3890) or Equivalent. Also, HRM Catheter Extended warranty or equivalent. Offeror quotations must demonstrate meeting the salient physical, functional, or performance characteristic specified in this solicitation, otherwise it will be considered non-responsive. The technical specifications for this requirement are listed for Brand Name or Equal per FAR 52.211-6. The information identified provided is intended to be descriptive, not restrictive and to indicate the quality that will be satisfactory. The interested parties bear full responsibility to ensure their submission demonstrates to the government that they can provide the brand name or equal to supplies being requested. Brand name information: Manufacturer: Medtronic. Item # Stock Number Description Qty UOM 1 3890 Manoscan ESO CATH X1 2 EA (viii) Delivery Requirements: Place of Delivery: VA Southern Arizona Healthcare System, 3601 South 6th Ave Tucson, AZ 85723 Period of Performance/Delivery Timeframe: The Period of Performance shall be a Base + (1) One Year Period. Additional Delivery Requirements (ix) The provision at 52.212-1, Instructions to Offerors Commercial Items, applies to this solicitation. Addendum: All offeror quotes for this solicitation must be received electronically through email no later than Monday, September 29th, 2025 10:00 AM PT. Ensure to reference solicitation number [36C26225Q1510] within subject line of the email. Any offeror quotes received after the prescribed date/time shall be considered non-responsive and will not be considered for award. Any questions regarding this solicitation must be received electronically through email no later than Monday, September 22nd, 2025, 2:00pm PT]. Offers shall be sent by email to Jonathan.Ford1@va.gov. Ensure the following are completed and/or included in the quote packet: Vendor Information with SAM UEI. b. Concurrence/non-concurrence with solicitation terms, conditions, and provisions c. Items shall be FOB destination. Please specify offered item manufacturer and part number. d. Provide an Authorized Distributor Letter/Memo from the manufacturer. e. Product must comply with the Buy American Act, Trade Agreement Act and all other clauses stated on this document. f. Please include a Country of Origin for the items being offered (see column A) g. Offerors shall provide verification that their items are not Gray Market such as examples on Page 4, section Gray Market h. Offerors shall fill out columns F-K of Attachment A conforming to requirements stated by the salient characteristics which includes exact measurements and the instructions below. - If providing an equivalent product, offerors shall either provide information regarding how their product meets the salient characteristics or alternatively may state where in the offeror s overall submission that information can be found. See 52.211-6 for additional information. (x) 52.212-2 Evaluation -- Commercial Items (Oct 2014) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Lowest priced quotation that meets all salient characteristics in attachment B and (any other stated requirements such as additional delivery requirements) that is both responsive and responsible. Acceptability of equipment/services shall be established by review of each submitted quotation by the designated evaluator(s) and verification that any equal-to items meet the salient characteristics included in this solicitation. Submissions to this solicitation must show clear, compelling and convincing evidence that equal-to items meet all the salient characteristics (see Attachment A and B). Offers that include any items that are not determined as Brand Name or Equal shall result in an unacceptable offer. See 52.211-6 Brand Name or Equal for additional information. (b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified with a minimum of at least sixty days, shall result in a binding contract without further action by either party. Before the offer s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision) (xi) Must include a completed copy of the provision at 52.212-3 -- Offeror Representations and Certifications -- Commercial Items, with this solicitation or ensure SAM.gov is updated with current information. (xii) The clause at 52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition. (xiii) The clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items, applies to this acquisition. (xiv) The following clauses also apply: (xv) 52.211-6 - Brand Name or Equal (Aug 1999) (a) If an item in this solicitation is identified as brand name or equal, the purchase description reflects the characteristics and level of quality that will satisfy the Government s needs. The salient physical, functional, or performance characteristics that equal products must meet are specified in the solicitation. (b) To be considered for award, offers of equal products, including equal products of the brand name manufacturer, must (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification. (c) The Contracting Officer will evaluate equal products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an equal product, the offeror shall provide the brand name product referenced in the solicitation. (End of clause) (xvi) Grey Market Items (a) Gray market items are Original Equipment Manufacturer s (OEM) goods sold through unauthorized channels in direct competition with authorized distributors. This procurement is for new OEM medical supplies, medical equipment and/or services contracts for maintenance of medical equipment (i.e. replacement parts) for VA Medical Centers. No remanufactures or gray market items will be acceptable. (b) Vendor shall be an OEM, authorized dealer, authorized distributor or authorized reseller for the proposed medical supplies, medical equipment and/or services contracts for maintenance of medical equipment (i.e. replacement parts), verified by an authorization letter or other documents from the OEM, such that the OEM s warranty and service are provided and maintained by the OEM. All software licensing, warranty and service associated with the medical supplies, medical equipment and/or services contracts for maintenance of medical equipment shall be in accordance with the OEM terms and conditions. (c) The delivery of gray market items to the VA in the fulfillment of an order/award constitutes a breach of contract. Accordingly, the VA reserves the right to enforce any of its contractual remedies. This includes termination of the contract or, solely at the VA s election, allowing the Vendor to replace, at no cost to the Government, any remanufactured or gray market item(s) delivered to a VA medical facility upon discovery of such items. (End of clause) (xvii) FAR 52.225-1 Buy American-Supplies (Oct 2022) (a) Definitions. As used in this clause Commercially available off-the-shelf (COTS) item (1) Means any item of supply (including construction material) that is (i) A commercial product (as defined in paragraph (1) of the definition of commercial product at Federal Acquisition Regulation (FAR) 2.101); (ii) Sold in substantial quantities in the commercial marketplace; and (iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and (2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products. Component means an article, material, or supply incorporated directly into an end product. Cost of components means (1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or (2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product. Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105 . Domestic end product means (1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both- (i) An unmanufactured end product mined or produced in the United States; (ii) An end product manufactured in the United States, if- (A) The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029. Components of foreign origin of the same class or kind as those that the agency determines are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities of a satisfactory quality are treated as domestic. Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic; or (B) The end product is a COTS item; or (2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all the components used in the end product. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the end product and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the definition of ""cost of components"". End product means those articles, materials, and supplies to be acquired under the contract for public use. Fastener means a hardware device that mechanically joins or affixes two or more objects together. Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws. Foreign end product means an end product other than a domestic end product. Foreign iron and steel means iron or steel products not produced in the United States. Produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, from the initial melting stage through the application of coatings, except metallurgical processes involving refinement of steel additives. The origin of the elements of the iron or steel is not relevant to the determination of whether it is domestic or foreign. Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners. Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements. United States means the 50 States, the District of Columbia, and outlying areas. (b) 41 U.S.C. chapter 83, Buy American, provides a preference for domestic end products for supplies acquired for use in the United States. In accordance with 41 U.S.C. 1907, the domestic content test of the Buy American statute is waived for an end product that is a COTS item (see 12.505(a)(1)), except that for an end product that consists wholly or predominantly of iron or steel or a combination of both, the domestic content test is applied only to the iron and steel content of the end product, excluding COTS fasteners. (c) Offerors may obtain from the Contracting Officer a list of foreign articles that the Contracting Officer will treat as domestic for this contract. (d) The Contractor shall deliver only domestic end products except to the extent that it specified delivery of foreign end products in the provision of the solicitation entitled ""Buy American Certificate."" (End of clause) (xviii) FAR 52.225-2 Buy American Certificate (Oct 2022) (a)(1) The Offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c) of this provision contains a critical component. (2) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select no . (3) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105). (4) The terms commercially available off-the-shelf (COTS) item, critical component, ""domestic end product,"" ""end product,"" and ""foreign end product"" are defined in the clause of this solicitation entitled ""Buy American-Supplies."" Line Item No. Country of Origin Exceeds 55% domestic content (yes/no) ______________ _________________ _________________ ______________ _________________ _________________ ______________ _________________ _________________ (b)Foreign End Products: (b)[List as necessary] (c) Domestic end products containing a critical component: Line Item No. ___ [List as necessary] (d) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation. (End of provision) In addition, the following clauses shall also apply: 52.209-6 Protecting the government s interest when subcontracting with contractors debarred, suspended, or proposed for debarment Aug 2013 52.232-18 Availability of Funds Apr 1984 52.232-33 Payment by electronic funds transfer system for award management Jul 2013 52.232-40 Providing accelerated payments to small business subcontractors Dec 2013 52.233-1 Disputes May 2014 52.233-3 Protest after award Aug 1996 52.252-2 Clauses incorporated by reference Feb 1998 852.203-70 Commercial advertising Jan 2008 852.232-72 Electronic submission of payment requests Nov 2012 852.237-70 852.219-78 Contractor responsibilities Notice of Limitations on Subcontracting Supplies and Services Apr 1984 852.219-73 VA Notice of Total Set-Aside For Certified Service-Disabled Veteran-Owned Small Businesses Jan 2023 The full text of a clause may be accessed electronically at the following: http://www.acquisition.gov/comp/far/index.html http://www.va.gov/oal/library/vaar/index.asp The following provisions shall also apply: 52.204-7 System for Award Management Oct 2018 52.204-16 Commercial and Government Entity Code Reporting Oct 2016 52.209-7 Information Regarding Responsibility Matters Oct 2018 52.217-5 Evaluation of Options Jul 1990 52.233-2 Service of Protest Sep 2006 852.233-70 Protest Content/Alternative Dispute Resolution Oct 2018 852.252-70 Solicitation Provisions or Clauses Incorporated by Reference Jan 2008
- Web Link
-
SAM.gov Permalink
(https://sam.gov/workspace/contract/opp/288709894aa743a8a7882c8eda6ca026/view)
- Place of Performance
- Address: VA Southern Arizona Healthcare System 3601 South 6th Ave, Tucson, AZ 85723, USA
- Zip Code: 85723
- Country: USA
- Zip Code: 85723
- Record
- SN07593221-F 20250918/250916230047 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |