SOLICITATION NOTICE
60 -- Fiber Connectors, Wipes
- Notice Date
- 3/26/2026 6:27:30 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334417
— Electronic Connector Manufacturing
- Contracting Office
- W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
- ZIP Code
- 13602-5220
- Solicitation Number
- W911S226U2899
- Response Due
- 4/2/2026 8:00:00 AM
- Archive Date
- 03/26/2027
- Point of Contact
- Tyrone Edelen, Phone: 7067915767
- E-Mail Address
-
tyrone.b.edelen.civ@army.mil
(tyrone.b.edelen.civ@army.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- 8300-W1K-S Single Mode SC Hot Melt Connector with white 3mm boot Part# 8300. for 125?m fiber, 250/900?m jacketed cable features a zirconia ceramic ferrule with 0.2 dB typical loss for single mode fiber. It is specifically designed for ease of termination in local area networks. Pre-loaded with advanced re-heat able adhesive, this connector allows fiber repositioning and shows blue dot of adhesive after fiber insertion. It has no internal splice. No need for epoxy mixing. The termination time is about 2 minutes. The 8300-W1K-S hot melt connector meets TIA/EIA 568-C.3 standard for indoor and outdoor applications. WHITE boot. Sold 1 per package.002: 8100YS ST Single Mode Hot Melt Fiber Connector with Yellow 3MM Boot Part# 8100YS. For 125?m fiber features a zirconia ceramicferrulewith0.2 typical loss for single mode fiber. Specifically designed for quick, accurate and permanent field terminations in LAN intrabuilding environments. Color-coded yellow boot. Sold 1 per package.003: SC Hot Melt Connector Multimode 125?m 6300W These Hot Melt Fiber Optic Connectors utilize an advanced adhesive technology eliminating the application of epoxy. 3M Hot Melt Fiber Optic Connectors enable you to terminate fiberin2minutes or less. 3M Hot Melt Fiber Optic Connectors are re-heatable to allow for fiber repositioning. These fiber optic connectors have a typical loss of .2dB.0004: ST Hot Melt Connector Multimode 125?m 6100 These Hot Melt Fiber Optic Connectors utilize an advanced adhesive technology eliminating the application of epoxy. 3M Hot Melt Fiber Optic Connectors enable you to terminate fiberin2minutes or less. 3M Hot Melt Fiber Optic Connectors are re-heatable to allow for fiber repositioning. These fiber optic connectors have a typical loss of .2dB.0005: Electro-Wash MX Cleaner Degreaser is a high flash point cleaner that quickly removes soils, adhesives, and residues from insulation jackets and conductors on telecom, fiber optic and coaxial cables. Engineered with very low surface tension, this formulation penetrates and removes soils quickly with excellent wetting action, lifting and removing soils from the dirtiest areas. Electro-Wash MX Cleaner Degreaser is also ideal for removing carbonization, oxidized oils and greases from metal surface.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/workspace/contract/opp/63bbe2168c7d48d48a726528381aa829/view)
- Place of Performance
- Address: Fort Gordon, GA 30905
- Record
- SN07759240-F 20260328/260326230054 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |