MCA Engineers, Inc., 1721 Pacific Avenue, Suite 160, Oxnard, CA 93033

99 -- REVISION OF NAVY PHYSICAL SECURITY EQUIPMENT MANUAL. Contact Bart Hanchett, Program Manager, or Kim Stoddard, Project Engineer, 805/486-8881, FAX 805/486-2886. The Navy Physical Security Equipment Manual (``Manual'') provides military security managers with a reference document they can use as an overview and guide to the proper selection and use of security equipment. The Manual primarily covers mechanical and electromechanical physical security components-off-the-shelf (COTS). Each section (grouping of similar physical security equipment) in the Manual provides: (1) A functional description of the type of equipment, (2) A selection and ordering guide, and (3) Installation and service information for those items of equipment. A listing of known manufacturers/distributors of physical security COTS of each equipment group is included in the Manual as an appendix. The primary items of physical security equipment that will be addressed in the revised Manual are: Metal and explosives detectors, access control equipment, electric strikes, exit devices, emergency exit hardware, security hinges, hinge-side protection hardware, sliding door locks, GSA approved vault doors and modular vault systems, GSA approved security containers (Class 5, 6, & 7), media (data) safes, burglary resistant safes, gun/weapons safes, weapon containers, ISO containers, fire-resistant safes, combination locks, low- & high-security hasps, low- & high-security padlocks, mortise locks, key-in-locks, rim locks, drop-bolt locks, dead-bolt locks, interchangeable-core locks, magnetic locks, unit locks, office equipment locks, cam/cabinet locks, weapon racks, security chain, key-control software, key-control boxes, security seals, security consoles, information & emergency destruction equipment. Intrusion Detection Systems (IDS) and IDS sensors will not be addressed in the revised Manual. Other physical security items submitted for inclusion in the Manual will be considered on a case-by-case basis. Manufacturers/distributors of physical security equipment listed above are invited to submit product information for possible inclusion in the Manual. Information concerning the use and installation of manufacturer's equipment is required for inclusion of commercial physical security equipment in the Manual. Specific information submitted must include, but not be limited to: (1) Type and application of submitted products/equipment (annotate products which are sold under the Federal Supply Schedule), (2) Manufacturer's/distributor's name, address, and POC along with their ``800'', local, and FAX phone numbers, (3) Any special capabilities needed/desired for installation and/or use of your components or equipment. Send information for inclusion in the Manual to MCA Engineers, Inc., 1721 Pacific Avenue - Suite 160, Oxnard, CA 93033, Attention: Bart Hanchett prior to 19 June 1995. Manufacturers and distributors are encouraged to contact Kim Stoddard at 805/486-8881, or by FAX 805/486-2886 for any further information or clarification desired. MCA Engineers, Inc., does not intend to award a contract on the basis of this solicitation or to otherwise pay for the information solicited. This work is being performed under Navy Contract No. N47408-93-D-7300. (139)

Loren Data Corp. http://www.ld.com (SYN# 0454 19950522\99-0011.SOL)