Contracting Officer, Crane Army Ammunition Activity, 300 Highway 361, SIOCN-CT, Crane, IN 47522-5099

13 -- STRIKER, STRIKER ARM, SEAL RING, END DISK, OUTER CONTAINER, RELEASE LATCH, SMOKE PRIMER HOLDER, PRIMER INSERT HOUSING, END ITEM USE IS MK124-0 SIGNAL SMOKE POC Richard Inman (812) 854-2919, Ronald E Wise, Contracting Officer. Sources are sought for the following parts (Drawings are DEPARTMENT OF THE NAVY NAVAL SEA SYSTEMS COMMAND): Striker (Drawing # 2114077), qty 60,000; 1. material: steel bars, corrosion-resisting, QQ-S-763, class 302, 303, 304 and 316 condition A, cold drawn. Striker Arm (Drawing # 2114078), qty 60,000; 1. Material: steel strip, corrosion-resisting, QQ-S-766, class 302 or 304, condition A, finish 2. Seal Ring (Drawing # 2114082), qty 30,000; 1. material: aluminum alloy rod, QQ-A-225/8, aluminum alloy tube, WW-T-700/6, 6061-T6, type I. End Disk (Drawing #2114085), qty 30,000; 1. material: aluminum 1100, QQ-A-250/I, temper O or aluminum alloy 3003, QQ-A-250/2, temper O. Outer container (drawing # 2128203), qty 30,000; 1. material: tube, aluminum alloy, WW-T-700/6, 6061-T6, type I, 2. Finish accordance with MIL-STD-171, 7.2.1, 3. Dimensional limits and surface texture designations apply after anodizing, 4. wall thickness shall not be less than .021 min, 5. diameter applies from .60 to 1.50 on ring end of container. Release Latch (Drawing # 2128204) qty 60,000, 1. material: steel strip, corrosion resisting, ASTM A 240 and ASTM A 666, class 302 or 304, condition A, finish 2, 2. finish IAW MIL-STD-171, 1.1.2.2. Smoke Primer Holder, (Drawing # 2128328), qty 30,000, 1. material: aluminum alloy rod, QQ-A-225/8, 6061-T6. Primer Insert (Drawing # 2151771), qty 30,000, material: aluminum alloy rod, QQ-A-225/8, 6061-T6. Housing, (Drawing #3139732), qty 60,000, 1. material: aluminum alloy die casting, ASTM B 85, alloy # A380.0, alternate alloy no. 380.0. These drawings may be requested in writing to Richard Inman, SIOCN-IOC, Crane Army Ammunition Activity, Crane IN 47522-5099 or by facsimile machine via FAX machine number (812) 854-3407. Firms responding to the synopsis should state their business size and submit sufficient information which will permit evaluation of technical capabilities. Responses to this synopsis must be received 30 days from date of publication of this announcement. (033)

Loren Data Corp. http://www.ld.com (SYN# 0191 19960207\13-0006.SOL)