Navy Public Works Center Code 846 Bldg 3213 2730 McKean St Ste 1 San Diego CA 92136-5294

56 -- METAL DOORS AND FRAMES SOL N63387-97-Q-J221 DUE 031097 POC Linda Hersey, Purchasing agent, (619)556-7248, FAX: (619)556-7775 Jessie Bermudez, Supervisory Purchasing Agent, (619)556-7244. 21 EACH Metal door and frame, 1.5 hour fire rated, furnished with smoke seals and hydraulic closer. 10 inch X 10 inch vision light centered in upper section of door. Prep for and furnish with 3 each 4.5 inch X 4.5 inch ball bearing hinges, Von Duprin 9975 NL-F mortise exit device, with best lock cylinder (7-pin) less core. Door to be 18 GA metal. Frame to be 16 GA metal K.D. construction furnished with masonry anchors. Overall frame width to be 7 inches. Hardware finish 626 satin chrome. Furnish frames punched and dimpled with S-3 strike plate. Door and frame to have W.H.I. or U.L. label for 1.5 hour fire rating. Vendor is required to field verify dimensions for all doors and frames. Doors and frames are to be furnished to fit existing masonry openings which vary from 39 13/16 inches to 40 3/16 inches width and 84 11/16 inches to 85 3/4 inches height. 1 EACH Metal door and frame. Prep for and furnish with 3 each 4.5 inch X 4.5 inch ball bearing hinges, Von Duprin 9975 NL-F mortise exit device, with best lock cylinder (7- pin) less core, door closer, smoke seals, and 10 inch X 10 inch wire impregnated light centered in the upper section od the door. Door size 1 3/4 inch X 3.0 feet X 7.0 feet. Door to be 18 GA metal. Frame to be 16 GA metal K.D. with mounting hardware for metal stud/gypboard walls. Throat size to be 4 7/8 inch. Hardware finish 626 satin chrome. Door and frame to have W.H.I. or U.L. label for 1.5 hour fire rating. Viewed from the outside, the door opens out with hinges on the right side of the door. Furnish with S-3 strike plate. 1 EACH Metal door and frame. Prep for and furnish with 3 each 4.5 inch X 4.5 inch ball bearing hinges, Von Duprin 9975 NL-F mortise exit device, with best lock cylinder (7- pin) less core, door closer, smoke seals, and 10 inch X 10 inch wire impregnated light centered in the upper section od the door. Door size 1 3/4 inch X 3.0 feet X 7.0 feet. Door to be 18 GA metal. Frame to be 16 GA metal K.D. with mounting hardware for metal stud/gypboard walls. Throat size to be4 7/8 inch. Hardware finish 626 satin chrome. Door and frame to have W.H.I. or U.L. label for 1.5 hour fire rating. Viewed from the outside, the door opens out with hinges on the left side of the door. Furnish with S-3 strike plate. (0051)

Loren Data Corp. http://www.ld.com (SYN# 0254 19970224\56-0001.SOL)