Sa-Alc/Propulsion Directorate, 485 Quentin Roosevelt Rd, Kelly Afb, Texas 78241-6427

53 -- LOOP CLAMP SOL F41608-98-R-44035 DUE 011698 POC For copy, Fax request to LPKAF at (210)925-8496, For additional information contact Willis, Suzanne/Lpkaf/[210]925-6566 Item 0001 NSN 5340-01-340-5201 This part is critical in desing and operation, cushion material is source controlled by Pratt & Whitney, per drawing PWA36450 specification. Quality of this part is essentail to safe engine operation. The reliability of the component is dependent upon establishing and maintaining effective process control. Item requires engineering source approval by the design control activity in order to assure that prospective offerors are capable of establishing and maintaining effective process control. Qualification Requirments will be made available upon request to SA-ALC/LPFE (210) 925-0792 John Solberg First article inspection is required. All specs and standards listed on drawing as well as sub-tier spec and standards apply. Loop clamp is used on F100-200- 220-220E, total of 18 are used in various places on the engine. Delivery rqmt is Dec 97; however provide best delivery possible. 60ea. Applicable to: F100 Engine. Destn: Kelly Afb, Texas 78241-6427. Delivery: 30 DEC 97 60 ea Item 0002 NSN 5340-01-340-5201PT Loop Clamp P/N: ST1540-12, Size: ABMK: Overall width 0.516" nom/loop inside diameter 0.750" : ABPX thickness 0.031" nom/ABMZ tongue hole: round, unth. AZCY center to center distance between loop and mounting hole: 0.845" AZDC from loop center to tongue end: 1.063"/dia 0.204" Pred Matl: Clamp-AMS 5510, Fluoroslicone cushion material: (spec ta 9798) pwa 36450 Function: Provides retention for fuel and oil lines. Delivery: DEC 97 unrealistic, provide best possible del schedule There are 4 line items 0001, 0002, 0003, 0004 there is no duplicate line item 0004 (disregard the second line item 0004 6ea. Applicable to: F100/200/220 Engine. Destn: Kelly Afb, Texas 78241-6427. Delivery: 30 DEC 97 6 ea Item 0003 NSN 5340-01-340-5201PT Loop Clamp P/N: ST1540-12, Size: ABMK: Overall width 0.516" nom/loop inside diameter 0.750" : ABPX thickness 0.031" nom/ABMZ tongue hole: round, unth. AZCY center to center distance between loop and mounting hole: 0.845" AZDC from loop center to tongue end: 1.063"/dia 0.204" Pred Matl: Clamp-AMS 5510, Fluoroslicone cushion material: (spec ta 9798) pwa 36450 Function: Provides retention for fuel and oil lines. Delivery: DEC 97 unrealistic, provide best possible del schedule There are 4 line items 0001, 0002, 0003, 0004 there is no duplicate line item 0004 (disregard the second line item 0004 130ea. Applicable to: F100/200/220 Engine. Destn: Kelly Afb, Texas 78241-6427. Delivery: 30 DEC 97 130 ea Item 0004 NSN 5340-01-340-5201PT Loop Clamp P/N: ST1540-12, Size: ABMK: Overall width 0.516" nom/loop inside diameter 0.750" : ABPX thickness 0.031" nom/ABMZ tongue hole: round, unth. AZCY center to center distance between loop and mounting hole: 0.845" AZDC from loop center to tongue end: 1.063"/dia 0.204" Pred Matl: Clamp-AMS 5510, Fluoroslicone cushion material: (spec ta 9798) pwa 36450 Function: Provides retention for fuel and oil lines. Delivery: DEC 97 unrealistic, provide best possible del schedule There are 4 line items 0001, 0002, 0003, 0004 there is no duplicate line item 0004 (disregard the second line item 0004 13542ea. Applicable to: F100/200/220 Engine. Destn: Kelly Afb, Texas 78241-6427. Delivery: 30 DEC 97 13542 ea Item 0005 NSN 5340-01-340-5201PT Loop Clamp P/N: ST1540-12, Size: ABMK: Overall width 0.516" nom/loop inside diameter 0.750" : ABPX thickness 0.031" nom/ABMZ tongue hole: round, unth. AZCY center to center distance between loop and mounting hole: 0.845" AZDC from loop center to tongue end: 1.063"/dia 0.204" Pred Matl: Clamp-AMS 5510, Fluoroslicone cushion material: (spec ta 9798) pwa 36450 Function: Provides retention for fuel and oil lines. Delivery: DEC 97 unrealistic, provide best possible del schedule There are 4 line items 0001, 0002, 0003, 0004 there is no duplicate line item 0004 (disregard the second line item 0004 EA. Applicable to: F100/200/220 Engine. Destn: Kelly Afb, Texas 78241-6427. Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The requirements of FAR 9.202(A) have been completed and copies of the qualification requirements and standards may be obtained as described in the solicitation. These qualification requirements apply to line item(s) 0001-0004 This requirement is a Multi-year contract, FMS requirement The approximate issue/response date will be 17 Dec 97. The anticipated award date will be 27 FEB 98. Written procedure will be used for this solicitation. To: Ta Mfg Corp, Glendale Ca 91209-2500. To: Alamo Aircraft Supply Inc, San Antonio Tx 78237-0343. To: Umpco Inc, Garden Grove Ca 92645-0000. First article test required. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. All responsible sources solicited may submit a bid, proposal, or quotation which shall be considered. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty five-days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements is cited in each individual solicitation. See Note (s) Note 26 applies. (0331)

Loren Data Corp. http://www.ld.com (SYN# 0073 19971202\53-0001.SOL)