U.S. Army Aviation and Missile Command, Acquisition Center, Bldg 4488, Redstone Arsenal, AL 35898-5280

15 -- DUCT ASSEMBLY, AIR SOL DAAH23-98-Q-0613 DUE 083198 POC POC-Phil Eatherton, (256)842-7070, Contracting Officer-Dan Fuller, (256)955-9258, FAX: (256)842-7070 E-MAIL: Click here to reach the Point of Contact vai e-mail., eatherton-ph@redstone.army.mil. THIS IS A COMBINED SYNOPSIS/SOLICITATION NUMBER: DAAH23-98-Q-0613, NOUN: Duct Assembly, Air C; NSN: 1560-01-244-6433, PRON: AX8F0139AX, CLOSING DATE: 31 AUG 1998, SIC CODE: 3672, POC: Phil Eatherton; e-mail: eatherton-ph@redstone.army.mil. This is restricted to Sikorsky Aircraft Corporation of Stratford, Connecticut. Item No. 0001AA, 105 each, P/N: 70309-02103-045, applicable to the UH-60 Aircraft. Inspection and acceptance at Origin. Inspection requirements: 52.246-2, 52.246-11 (ISO 9002 or equivalent), Selection/Terminology/Calibration: ISO 8402 (Terminology), and ANSI/NCSL Z540-1-1994 or ISO 10012-1-1992 (Calibration) (USAATCOM 52.246-4002). FOB Point: Destination with deliveries to Texarkana, TX. The required delivery date is 150 days after receipt of order. Level of Preservation/Packing: A/B. PRESERVATION AND PACKAGING: Items shall be preserved and packaged as coded below IAW MIL-STD-2073-2C, -- -- - MP/I: 10, CD/II: 1, PM/III: 00, WM/IV: EB, CD/V: BG, CT/VI: X, UC/VII: ED, IC/VII: 00, LOP/VIII: A, QUP: 001, ICQ: 000, OPI/VIIIb: 0. PACKAGING -- Items preserved and packaged as above shall be packed IAW MIL-STD-2073-2C, Table IX, Code F. MARKING -- Special markings in accordance with MIL-STD-2073-2C, Table X, Code 99. This acquisition is subject to availability of funds. Procurement History: Award Date: 89 Aug 29, Quantity: 99 ea., $672.66 ea., Contractor: Sikorsky Aircraft Corp. The history provided has not been screened in any manner to ascertain the actual circumstances of a procurement and should not be considered as a reliable indicator of an appropriate price level for this solicitation. This announcement constitutes the only solicitation document; quotations are being requested and a formal solicitation will not be issued. Cite Request for Quotation (RFQ) No. in your response. Submit quotations to arrive no later than close of business 31 Aug 1998. Any award resulting from this RFQ will be issued on DD Form 1155 and will contain all clauses required by Law, the Federal Acquisition Regulation (FAR), and the Defense Federal Acquisition Regulation Supplement (DFARS) as appropriate for the dollar value of the award. FAR 52.252-1, Solicitation Provisions Incorporated by Reference (Jun 1988) and FAR 52.252-2, Clauses Incorporated by Reference (Jun 1988) -- This solicitation incorporates one or more solicitation provisions/clauses by reference, with the same force and effect as if they were given in full text. Upon request, the contracting officer will make their full text available. Quotations shall provide the following information, representations, and certifications: 1. FOB point if other than destination. 2. Quotation is firm for 90 days unless otherwise stated. 3. Furnish vendors part number(s) if other than listed with each item. 4. Point(s) of shipment, performance, preservation, packaging, and marking. 5. Remittance address. 6. Taxpayer Identification Number (TIN) per FAR 52.204-3, Taxpayer Identification (Mar 1994). 7. Commercial and Government Entity (CAGE) Code Reporting (Dec 1991). 8. Offeror's Recommended Economic Purchase Quantity, Unit Price, Total Amount per FAR 52.207-4, Economic Purchase Quantity -- Supplies (Aug 1987). 9. Information required by FAR 52.211-5, Material Requirements (Oct 1997) if applicable. 10. FAR 52.219-1, Small Business Program Representations (Oct 1995). The standard industrial classification (SIC) code is 3728. The small business size standard is 1,000 employees. 11. FAR 52.222-22, Previous Contracts and Compliance Reports (Apr 1984). 12. FAR 52.222-25, Affirmative Action Compliance (Apr 1984). 13. DFARS 252.225-7035, Buy American Act -- North American Free Trade Agreement Implementation Act -- Balance of Payments Program Certificate (May 1995). 14. DFARS 252.219-7000, Small Disadvantaged Business Concern Representation (DoD Contracts) (Apr 1994). Quotations may be submitted in contractor format. See Number Notes 23 and 26. Justification for other than full and open competition is FAR 6.302-1, Only One Source or Only a Limited Number of Responsible Sources. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source require acquisition of the part from the approved source. The approved source retains the data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government Engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. All responsible sources may submit an offer which will be considered. The time required for approval of new supplies is such that award and delivery cannot be delayed pending approval of a new source. Firms are encouraged to seek source approval in order to compete for future solicitations by submitting a source approval request (SAR) package to: AMCOM, ATTN: AMSAM-AR-E-I-F-S/Ramon Campos, (256) 313-4909, Bldg. 5681, Redstone Arsenal, AL 35898-5280. THIS IS A COMBINED SYNOPSIS/SOLICITATION NUMBER: DAAH23-98-Q-0613, NOUN: Duct Assembly, Air C; NSN: 1560-01-244-6433, PRON: AX8F0139AX, CLOSING DATE: 31 AUG 1998, SIC CODE: 3672, POC: Phil Eatherton; e-mail: eatherton-ph@redstone.army.mil. This is restricted to Sikorsky Aircraft Corporation of Stratford, Connecticut. Item No. 0001AA, 105 each, P/N: 70309-02103-045, applicable to the UH-60 Aircraft. Inspection and acceptance at Origin. Inspection requirements: 52.246-2, 52.246-11 (ISO 9002 or equivalent), Selection/Terminology/Calibration: ISO 8402 (Terminology), and ANSI/NCSL Z540-1-1994 or ISO 10012-1-1992 (Calibration) (USAATCOM 52.246-4002). FOB Point: Destination with deliveries to Texarkana, TX. The required delivery date is 150 days after receipt of order. Level of Preservation/Packing: A/B. PRESERVATION AND PACKAGING: Items shall be preserved and packaged as coded below IAW MIL-STD-2073-2C, -- -- - MP/I: 10, CD/II: 1, PM/III: 00, WM/IV: EB, CD/V: BG, CT/VI: X, UC/VII: ED, IC/VII: 00, LOP/VIII: A, QUP: 001, ICQ: 000, OPI/VIIIb: 0. PACKAGING -- Items preserved and packaged as above shall be packed IAW MIL-STD-2073-2C, Table IX, Code F. MARKING -- Special markings in accordance with MIL-STD-2073-2C, Table X, Code 99. This acquisition is subject to availability of funds. Procurement History: Award Date: 89 Aug 29, Quantity: 99 ea., $672.66 ea., Contractor: Sikorsky Aircraft Corp. The history provided has not been screened in any manner to ascertain the actual circumstances of a procurement and should not be considered as a reliable indicator of an appropriate price level for this solicitation. This announcement constitutes the only solicitation document; quotations are being requested and a formal solicitation will not be issued. Cite Request for Quotation (RFQ) No. in your response. Submit quotations to arrive no later than close of business 31 Aug 1998. Any award resulting from this RFQ will be issued on DD Form 1155 and will contain all clauses required by Law, the Federal Acquisition Regulation (FAR), and the Defense Federal Acquisition Regulation Supplement (DFARS) as appropriate for the dollar value of the award. FAR 52.252-1, Solicitation Provisions Incorporated by Reference (Jun 1988) and FAR 52.252-2, Clauses Incorporated by Reference (Jun 1988) -- This solicitation incorporates one or more solicitation provisions/clauses by reference, with the same force and effect as if they were given in full text. Upon request, the contracting officer will make their full text available. Quotations shall provide the following information, representations, and certifications: 1. FOB point if other than destination. 2. Quotation is firm for 90 days unless otherwise stated. 3. Furnish vendors part number(s) if other than listed with each item. 4. Point(s) of shipment, performance, preservation, packaging, and marking. 5. Remittance address. 6. Taxpayer Identification Number (TIN) per FAR 52.204-3, Taxpayer Identification (Mar 1994). 7. Commercial and Government Entity (CAGE) Code Reporting (Dec 1991). 8. Offeror's Recommended Economic Purchase Quantity, Unit Price, Total Amount per FAR 52.207-4, Economic Purchase Quantity -- Supplies (Aug 1987). 9. Information required by FAR 52.211-5, Material Requirements (Oct 1997) if applicable. 10. FAR 52.219-1, Small Business Program Representations (Oct 1995). The standard industrial classification (SIC) code is 3728. The small business size standard is 1,000 employees. 11. FAR 52.222-22, Previous Contracts and Compliance Reports (Apr 1984). 12. FAR 52.222-25, Affirmative Action Compliance (Apr 1984). 13. DFARS 252.225-7035, Buy American Act -- North American Free Trade Agreement Implementation Act -- Balance of Payments Program Certificate (May 1995). 14. DFARS 252.219-7000, Small Disadvantaged Business Concern Representation (DoD Contracts) (Apr 1994). Quotations may be submitted in contractor format. See Number Notes 23 and 26. Justification for other than full and open competition is FAR 6.302-1, Only One Source or Only a Limited Number of Responsible Sources. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source require acquisition of the part from the approved source. The approved source retains the data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government Engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. All responsible sources may submit an offer which will be considered. The time required for approval of new supplies is such that award and delivery cannot be delayed pending approval of a new source. Firms are encouraged to seek source approval in order to compete for future solicitations by submitting a source approval request (SAR) package to: AMCOM, ATTN: AMSAM-AR-E-I-F-S/Ramon Campos, (256) 313-4909, Bldg. 5681, Redstone Arsenal, AL 35898-5280. Posted 08/05/98 (W-SN232837). (0217)

Loren Data Corp. http://www.ld.com (SYN# 0240 19980807\15-0010.SOL)