Loren Data Corp.

'

 
 

COMMERCE BUSINESS DAILY ISSUE OF SEPTEMBER 2,1998 PSA#2172

NASA/George C. Marshall Space Flight Center, Procurement Office, Marshall Space Flight Center, AL 35812

70 -- ONE HUNDRED CHANNEL DATA SYSTEM WITH FREE SOFTWARE UPGRADE SOL 1-8-16-B9901 DUE 091498 POC Debbie R. Matthews, Contract Specialist, Phone (256) 544-8945, Fax (256) 961-0059, Email debbie.r.matthews@msfc.nasa.gov -- Michael R. Sosebee, Contracting Officer, Phone (256) 544-0415, Fax (256) 544-8641, Email michael.sosebee@msfc.nasa.gov WEB: Click here for the latest information about this notice, http://nais.nasa.gov/EPS/MSFC/date.html#1-8-16-B9901. E-MAIL: Debbie R. Matthews, debbie.r.matthews@msfc.nasa.gov. This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This procurement is being conducted under the Simplified Acquisition Procedures (SAP). DESCRIPTION: LINE ITEM 1. MEASUREMENTS GROUP WIN5000/5000 PC SOFTWARE AND INTERFACE HARDWARE PACKAGE INCLUDING BOTH PCMCIA AND ISA INTERFACE CARDS: SUPPORTS MEASUREMENTS GROUP 5100 SERIES MEASUREMENT ACQUISITION HARDWARE FROM A PC WINDOWS ENVIRONMENT. DATA REDUCTION FOR DELTA, RECTANGULAR, AND TEE STRAIN GAGE ROSETTES INCLUDING PRINCIPAL STRAIN/STRESS AND THERMAL OUTPUT COMPENSATION CALCULATIONS. WHEATSTONE BRIDGE NONLINEARITY CORRECTION. ON-LINE MONITORING OF KEY CHANNELS AND/OR ROSETTES IN FULLY REDUCED NUMERIC AND GRAPHIC FORMATS. QUANTITY 1 EA. LINE ITEM 2. MEASUREMENTS GROUP MODEL 5100 SCANNER: SCAN ALL MEASUREMENT INPUTS WITHIN A ONE MILLISECOND WINDOW. INTERVAL BETWEEN SCANS AS SHORT AS 100 MILLI- SECONDS. ACCEPT INPUTS FROM FOUR MEASUREMENTS GROUP SERIES 5100 MEASUREMENT INPUT CARDS. ANALOG-TO-DIGITAL CONVERSION: 15 BITS PLUS SIGN BIT. QUANTITY 5 EA. LINE ITEM 3. MEASUREMENTS GROUP MODEL 5050-5 BENCH-TOP CABINET: SUPPORTS 5 MEASUREMENTS GROUP MODEL 5100 SCANNERS. QUANTITY 1 EA. LINE ITEM 4. MEASUREMENTS GROUP MODEL 5110 FIVE CHANNEL STRAIN GAGE CARD: INTERFACES TO MEASUREMENTS GROUP MODEL 5100 SCANNER. BUILT-IN BRIDGE COMPLETION FOR 120, 350, AND 1000 OHM QUARTER BRIDGE STRAIN GAGE INPUTS.JUMPER SELECTABLE COMPLETION RESISTORS. INPUTS FROM STRAIN GAGE-BASED TRANSDUCERS WITH 60 TO 5000 OHM IMPEDANCE. STRAIN MEASUREMENT RANGE +/- 16383 MICROSTRAIN; STRAIN GAGE-BASED TRANSDUCER MEASUREMENT RANGE +/- 8 MILLIVOLT/VOLT. SOFTWARE PROGRAMMABLE EXCITATION SETTINGS OF 0, 0.5, 1, 2, 5, 10 VOLTS DC. TWO SHUNT CALIBRATION POINTS AVAILABLE ON EACH CHANNEL. QUANTITY 16 EA. LINE ITEM 5. MEASUREMENTS GROUP MODEL 5120 FIVE CHANNEL THERMOCOUPLE CARD: INTERFACES TO MEASUREMENTS GROUP MODEL 5100 SCANNER. INPUTS FROM THERMOCOUPLE TYPES J, K, T, E, R, S, B. SOFTWARE SELECTABLE ELECTRONIC COMPENSATION FOR EACH THERMO-COUPLE TYPE. MEASUREMENT RANGE +/- 81.9 MILLIVOLTS. QUANTITY 2 EA. LINE ITEM 6. MEASUREMENTS GROUP MODEL 5130A HIGH-LEVEL INPUT CARD: INTERFACES TO MEASUREMENTS GROUP MODEL 5100 SCANNER. DIFFERENTIAL DC VOLTAGE INPUTS IN THE RANGE OF +/- 10 VOLTS DC. PROVIDES EXCITATION SETTINGS OF 0, 0.5, 1, 2, 5, 10, 15, 20, 25, 30 VOLTS DC. SUPPORTS 250 MILLIAMP CURRENT AT 1 TO 15 VOLTS DC EXCITATION. OVER-CURRENT PROTECTION. QUANTITY 2 EA. LINE ITEM 7. MEASUREMENTS GROUP WIN4000/4000 PC SOFTWARE: WINDOWS-BASED SOFTWARE UPGRADE FOR MEASUREMENTS GROUP SYSTEM 4000 MEASUREMENT ACQUISITION SYSTEM. QUANTITY 1 EA. The provisions and clauses in the RFQ are those in effect through FAC 97-6. This procurement is a total small business set-aside. The SIC code and the small business size standard for this procurement are 7371 and $18.0 respectively. The quoter shall state in their quotation their size status for this procurement. All qualified responsible business sources may submit a quotation which shall be considered by the agency. Delivery to MSFC is required within 90 days ARO. Delivery shall be FOB Destination. The DPAS rating for this procurement is DO-C9. Quotations for the items described above may be mailed or faxed to the identified point of contact, by the date/time specified and include, solicitation number, FOB destination to this Center, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. Quoters are encouraged to use the Standard Form 1449, Solicitation/Contract/Order for Commercial Items form found at URL: http://procure.arc.nasa.gov/Acq/Standard_Forms/Index.html to submit a quotation. Quoters shall provide the information required by FAR 52.212-1 with exception of (d), (h), (i). If the end products quoted is other than domestic end products as defined in the clause entitled "Buy American Act -- Supplies," the quoter shall so state and shall list the country of origin. The Representations and Certifications required by FAR 52.2l2-3 may be obtained via the internet at URL: http://ec.msfc.nasa.gov/msfc/pub/reps_certs/sats/ FAR 52.212-4 is applicable. Addenda to FAR 52.212-4 are as follows: FAR 52.204-4, 52,211-15 AND 52.247-34. FAR 52.212-5 is applicable and the following identified clauses are incorporated by reference. 52.222-26, 52.222-35, 52.222-37, and 52.225-3. Questions regarding this acquisition must be submitted in writing no later than September 9, 1998.. Quotations are due by September 14, 1998 to the address specified above. Selection and award will be made on an aggregate basis to the lowest priced, technically acceptable quoter. Technical acceptability will be determined by information submitted by the quoter providing a description in sufficient detail to show that the product quoted meets the Government's requirement. Quoters must provide copies of the provision at 52.212-3, Offeror Representation and Certifications -- Commercial Items with their quote. See above for where to obtain copies of the form via the Internet. It is the quoter's responsibility to monitor this site for the release of amendments (if any). Potential quoters will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any). Any referenced notes can be viewed at the following URL: http://genesis.gsfc.nasa.gov/nnotes.htm. Posted 08/31/98 (D-SN243799). (0243)

Loren Data Corp. http://www.ld.com (SYN# 0306 19980902\70-0004.SOL)


70 - General Purpose ADP Equipment Software, Supplies and Support Eq. Index Page