|
COMMERCE BUSINESS DAILY ISSUE OF JUNE 15,1999 PSA#2367USDA, Forest Service, SW Idaho/Nevada Acquisition Office, 1249 S.
Vinnell Way, Boise, ID 83709 80 -- SUPPLY EQUIPMENTLESS FOAM TO THE BOISE, PAYETTE AND SAWTOOTH
NATIONAL FORESTS SOL Commercial Item R4-12-99-07 DUE 062899 POC Cheryl
Molis, Contracting Officer 208-373-4131 or Ethel Hill, Procurement
Assistant, 208-373-4128 This is a combined synopsis/solicitation for
commercial items prepared in accordance with Subpart 12.6, as
supplemented with additional information included in this notice. This
announcement constitutes the only solicitation; proposals are being
requested and a written solicitation will not be issued. This is
Request for Proposals R4-12-99-07. The solicitation document and
incorporated provisions and clauses are those in effect through Federal
Acquisition Circular 97-11. This solicitation is not set-aside for
small businesses -- SIC Code: 2191 Size Standard: 500 Line item as
follows: 1. Supply Equipmentless Foam to be used in the closing of
abandoned mine shafts and adits to the Boise National Forest, 1249
South Vinnell Way, Boise, ID 83709, the Payette National Forest, 800 W.
Lakeside Avenue, McCall, ID 83638, and the Sawtooth National Forest,
2647 Kimberly Road East, Twin Falls, ID 83301. This will be an
indefinite delivery indefinite quantity contract. The minimum amount to
be purchased is 200 cubic yards and the maximum amount to be purchased
is 600 cubic yards. The foam must meet the following specifications
which are listed as follows: Physical Property, Test (if there is one),
Result -- DENSITY(CORE) PCF, ASTM D-1622, 2.30-2.60, COMPRESSIVE
STRENGTH, ASTM-D 1621, Parallel psi 22-23; Perpendicular psi 10-26,
TENSILE ADHESION-PSI, ASTM-D 1623 type c, 20-30, SHEAR STRENGTH-PSI,
ASTM-C-273, 28-40, CLOSED CELL CONTENT %, ASTM-D-2856, 80-95, K
FACTOR-INITIAL BTU IN.HR.FT 2 DEGREES F, ASTM-D-518, 0.140-0.165, WATER
ABSORPTION LB/SQ FOOT, ASTM-D-2842-69, 0.01-0.04, PERCENT VOLUME
CHANGE, Humid Age-28 days (158 degrees F, 95% humidity) -- -2.0 to
+5.0, Dry Age-28 days (158 degrees F dry), +1.0 -- +4.6, Freeze -5 days
(-20 degrees F dry), -0.2 -- -0.5, COAST GUARD IMMERSION TEST PER ASTM,
Coast Guard, D-2842-69 REPORTED AS BUOYANCY LOSS IN VARIOUS LIQUIDS
AFTER 30 DAYS, DOT Subpart F, Bilge Solution 0.7 -- 1.8, Fuel 0.5 --
1.0, Oil 0.3 -- 0.6, FOAM/FIBERGLASS STRUCTURAL SURFACE ADHESION 70 --
75 DEGREES F SURFACE TEMPERATURE. Foam is to be in a two part solution
packaged for hand mixing. Typical properites are: Initiation of
Rise,sec. 20-30, Gel Time,sec. 130-160, Tack Free Time,sec. 190-240,
Core Density,pcf 2.30 -- 2.60. Delivery will be made to the offices
listed above, FOB Destination, within 14 days of receipt of a delivery
order. The following FAR clauses apply to this acquisition: 52.212-1
Instructions to Offers -- Commercial Items, 52.212-3 Offeror
Representations and Certifications -- Commercial Items, 52.212-4
Contract Terms and Conditions Required to Implement Statutes or
Executive Orders -- Commercial Items, 52.216-18 Ordering, 52.216-19
Order Limitations, 52.216-22 Indefinite Delivery. Note: Offerors must
include a copy of the provisions at 52.213-3, Offeror Representations
and Certifications -- Commercial Items with their proposal. They can be
obtained at http://www.arnet.gov/far. Proposals shall include a
description of the product offered and the price percubic yard
delivered. Proposals are due by June 28, 1999 at 2:00 P.M. at the SW
Idaho/Nevada Acquisition Office, 1249 South Vinnell Way, Boise, ID
83709. Proposals may be faxed to 208-373-4197. Posted 06/11/99
(W-SN342223). (0162) Loren Data Corp. http://www.ld.com (SYN# 0304 19990615\80-0001.SOL)
80 - Brushes, Paints, Sealers and Adhesives Index Page
|
|