Loren Data Corp.

'

 
 

COMMERCE BUSINESS DAILY ISSUE OF SEPTEMBER 10,1999 PSA#2429

Department of the Air Force, Air Combat Command, 20 CONS, 305 Blue Jay St, Bldg 1033, Shaw AFB, SC, 29152-5004

72 -- PURCHASE AND INSTALL CARPET SOL F38601-99-T0568 DUE 092199 POC Todd Synder, Contract Administrator, Phone (803) 895-6005 X272, Fax (803) 895-6020, Email todd.synder@shaw.af.mil WEB: Visit this URL for the latest information about this, http://www.eps.gov/cgi-bin/WebObjects/EPS?ACode=P&;ProjID=F38601-99-T05 68&LocID=793. E-MAIL: Todd Synder, todd.synder@shaw.af.mil. Furnish all labor, tools, equipment, material and transportation to purchase, remove and install 800 sq. yds. of carpet and 1850 lin. ft. carpet covebase in building 1130. Contractor is responsible for field measurement on both carpet and covebase. Carpet to be purchased and installed shall be 100% Monsanto Ultron VIP Filament nylon, multicolor textured loop, 30oz per sq. yd face weight, 1/10 gauge, woven ploypropylene primary backing and ActionBac secondary backing, style Wallasey, color #WL30B-6215 Thornfield, as manufactured by Bentley Carpet, or approved equal. Contractor shall purchase and install the carpet adhesive recommended by the manufacture. Carpet is to be installed in accordance with the manufacturer's instructions. Contractor shall be responsible for preparation of floor surfaces as necessary to receive carpeting. All surfaces to be free of voids and protrusions. Installed carpet shall be smooth, uniform and secure. Patterned goods will be accurately matched. Fit cutouts such as doors, jambs, columns, ducts, etc. neatly, securely and professionally. Contractor shall trim and butt edges together to form seams. Extra attention is to be observed while butting seams together. Contractor shall apply generous bead of seam adhesive to the edges to seal the seams and prevent fraying and raveling. Contractor shall vacuum carpet after installation. Contractor to provide a five year warranty against fraying, raveling, and separating buckling and on workmanship. The existing floor surface is suitable for installation without filling of holes or cracks. Contractor will furnish all cement, tape, and cap down moldings, and will be allowed to work from 0730 to 1630 without any special security requirements. The contractor shall bind carpet for cove base and install same. Carpet shall be the same color and style as field carpet. Cove base to be installed shall be 4" high, bound carpet. The contractor shall remove and dispose of all debris off base and in accordance with enviromental specifications, after carpet installation is completed and excess offered to Facility Monitor. Posted 09/08/99 (D-SN377257). (0251)

Loren Data Corp. http://www.ld.com (SYN# 0224 19990910\72-0001.SOL)


72 - Household and Commercial Furnishings and Appliances Index Page