General Services Administration, Federal Supply Service (FSS), Hardware and Appliance Center (6FE), 1500 East Bannister Road, Kansas City, MO, 64131

51 -- INSPECTION MIRROR SOL Reference-Number-AWY0455M-D8 DUE 051900 POC Elaine Rasmussen, Contract Specialist, Phone 816-823-1326, Fax 816-823-3109, Email elaine.rasmussen@gsa.gov WEB: Visit this URL for the latest information about this, http://www.eps.gov/cgi-bin/WebObjects/EPS?ACode=R&ProjID=Reference-Num ber-AWY0455M-D8&LocID=7. E-MAIL: Elaine Rasmussen, elaine.rasmussen@gsa.gov. This is a simplified acquisition for 5120-00-278-9926, Inspection Mirror. These will be delivered to a Warehouse Distribution Center (Stockton, CA; Fort Worth, TX; Burlington, NJ; and Palmetto, GA). Bar Code Marketing is required. The following clauses will apply: 552.225-71 -- Notice of Procurement Restriction; D-FSS-475 -- Bar Code Marking of National Stock Number; 552.246-70 Source Inspection by Quality Approved Manufacturer; 52.247-34 F.O.B. Destination. Please respond by Fax to 816-823-1326 or e-mail to elaine.rasmussen@gsa.gov, by May 19, 2000. 5120-00-278-9926 -- MIRROR, INSPECTION In accordance with GSA Purchase Description 5120-00-278-9926, dated 09/18/98. Size: 1 TECHNICAL SPECIFICATIONS WORKMANSHIP 2.1 Details of workmanship shall be in accordance with the best commercial standards and practices. Paints, coatings, platings, and finishes shall be smooth, dry, adherent, continuous, and not stained or discolored. Fasteners shall be firmly secured and show no evidence of deformation, cross threading, or hazardous burrs. Adhesives and lubricants adequate for their intended purpose shall be properly and neatly applied. Adhesives shall be adequately cured. Wires and cables shall be neatly dressed and shall not be frayed or in contact with sharp edges. Wire and cable insulation shall show no evidence of burns, abrading, or pinch marks. There shall be no interference, binding, or galling of parts. External and bearing surfaces shall be free of tool and gouge marks, nicks, or other surface imperfections. The item shall be clean and free of corrosion and debris (e.g., chips, shavings, slivers) or other foreign material. The item shall be free from manufacturing workmanship defects (e.g., loose, missing, binding or misaligned parts, sharp or rough external edges, corners or surfaces) and material workmanship defects (e.g., pits, rips, fins, burrs, tears, nodules, cracks, blisters) which may adversely impact the item's serviceability, durability, safety, or appearance. ITEM MARKING 3.1 Each item (including all items within a set or kit) shall be marked with the manufacturer's name and identifying symbol, and the state or country of manufacture, unless otherwise specified. All marking shall be engraved, etched, molded, or indented. PACKAGING 4.1 One (1) item shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling, and storage. PROHIBITION OF PLASTIC PACKAGING AND PACKING 4.3 Plastic in packaging, packing and associated marking materials are prohibited. The definition of plastic shall be as defined in ASTM D883-93. PACKING 5.1 The unit packages shall be packed in a close fitting fiberboard box, grade 200 minimum. The complete pack shall be in compliance with the Uniform Freight Classification and the National Motor Freight Classification. MARKING 6.1 All unit, intermediate, exterior shipping containers, and palletized or unitized loads shall be marked for delivery to civilian activities in accordance with latest version of FED-STD-123 or for delivery to military activities in accordance with latest version of MIL-STD-129, as applicable. 5120-00-278-9926 Price___________ Delivery Time ____________ UI EA Qty Requested 3888 (six purchase orders) Posted 05/05/00 (D-SN452035). (0126)

Loren Data Corp. http://www.ld.com (SYN# 0170 20000509\51-0001.SOL)