Fleet & Industrial Supply Center, Norfolk Detachment Washington, Washington Navy Yard, 1014 N Street SE, Suite400, Washington DC 20374-5014

36 -- WAX INJECTION SYSTEM WITH WAX PREPARATION AND TRANSFER UNIT SOL N00600-00-Q-2270 POC For a copy of the solicitation, contact Customer Service Center (202)433-2951 or fax in your request(202)433-2903 or download from www.neco.navy.mil. For additional infomation contact Chiara Alsop at (202) 433-2137. WEB: click on business opportunities and enter in solicitation, http://www.neco.navy.mil. The Fleet and Industrial Supply Center, Norfolk Detachment, Washington has a requirement to procure one wax injection system consisting of a wax injection machine for the Philadelphia Naval Business Center in Philadelphia, PA. This wax injection system shall consist of a wax injection machine, C-Frame Type, 50 Ton with a wax preparation and transfer unit. The procurement shall include all required attachments, controls, hardware, verification of installation, training, testing, and documentation. The procurement shall be a MPI (model 55-50) and MPI (model 94-25-100) or its equal. The requirement shall have all prescribed salient characteristics. The wax injection machine, C-frame type, 50 ton shall have the following salient characteristics: 1) Clamp force, 50 ton, 2) Platen Speed Close Rapid, 2.2 in./sec, 3) Platen Speed Close Slow, 1.1 in./sec, 4) Platen Speed Open, 2.3 in/sec, 5) Stroke, 20 in., 6) Daylight Maximum, 24 in. 7) Day light Minimum, 4 in., 8) Width of Platens, 24 in., 9) Depth of Platens, 30 in., 10) Nozzle In/Out Adjustment, 3-13 in., 11) Nozzle Up/Down Adjustment 2.25-10in., 12) Overall Height, 103 in., 13) Overall Width, 86 in., 14) Overall Depth, 72 in., 15) Platen to Floor, 36 in., 16) Work Area Width, 40 in., 17) Work Area Depth, 46 in., 18) Die Mount Holes, 3/8-16, 19) Wax Reservoir Capacity, 30 gal., 20) Wax Reservoir Cooling Capacity, 200 lb./hr @ 30 degrees F., 21) Single Shot Capacity, 400 cu. in/sec, 22) Injection Pressure, 50-1000 PSI, 23) Injection Rate, 0-15 cu. in./sec., 24) Injection Time, 0-999 sec., 25) Nozzle tip, 3/8 in. radius, 26) Hydraulic Pump Output, 11.2, GPM, 27) Hydraulic Reservoir Capacity, 33 gal., 28) Hydraulic Cooling Water, 3GPM @ 80 degrees F, 29) Power Requirement, 14.5 KVA, 30) Quick Change Die Clamping and 31) Hydraulic Pattern Ejector. The Wax Preparation and Transfer Unit shall have the following salient characteristics: 1) Melt capacity, 100lbs., 2) Melt Rate, 100 lbs. per hour, 3) Conditioner Capacity, 25 gal (200 lbs.), 4) Conditioner Rate, 30 lbs. per hour (3.7 GPH), 5) Pump Capacity, 1.4 GPM, 6) Pump Pressure, 200 psi Wax @ 72 psi Air, 7) Transfer Hose (Heated), 8ft. long, 8)Length, 66 in., 9) Width, 46 in. 10) Height, 66 in., 11) Power Requirement, 6.6 KVA, 12) Pump, Single Action Pneumatic Piston Type, 13) Mixer, Full Sweep 45 degree Inclined Blades, 14) Mixer Speed, 8 Rpm, 15) Mixer Motor HP, 1/6, 16) Temperature Control, Digital Time Proportioning (PID), 17) Heaters, Electric, 4 zone (Melter, Conditioner, Pump & Hose) 18) High Temperature Cutout, Snap Action Switch (Melter Conditioner Pump), 19) Reservoir Level Control and 20) Low Level Alarm. This procurement shall be of the manufacturer's current production model. The FSC code is 3680. This is a commercial item. This is being procured under FAR 13.5, " Test Program for Certain Commercial Item." This requirement is being procured on an unrestricted basis. This is a Firm Fixed Price procurement. Delivery shall be F.O.B. Destination to the Philadelphia Naval Business Center, Philadelphia, PA. All offerors must be registered with Central Contractor Register before award. Copies of the solicitation and necessary amendments can be obtained at www.neco.navy.mil or through Customer Service Center at (202) 685-1299. All responsible sources may submit a proposal for consideration. Posted 07/13/00 (W-SN474507). (0195)

Loren Data Corp. http://www.ld.com (SYN# 0249 20000717\36-0001.SOL)

| 36 - Special Industry Machinery Index  |  Issue Index |