C -- ARCHITECTURE AND ENGINEERING SERVICES FOR THE NEW CENSUS BUREAU HEADQUARTERS BUILDING, SUITLAND, MARYLAND. -- AMENDMENT 5

Notice Date

June 29, 2001

Contracting Office

GSA, NCR, PBS, Portfolio Development Division, Room 2002, 7th & D Streets, SW, Washington, DC 20407

ZIP Code

20407

Solicitation Number

GS11P01MKC0010

Response Due

July 17, 2001

Point of Contact

Chrischanda Smith, (202) 358-3573

E-Mail Address

Contract Specialist (chrischanda.smith@gsa.gov)

Description

The General Services Administration (GSA), National Capital Region, Washington, D. C. announces an opportunity for Design Excellence in Public Architecture. The GSA is seeking Architect-Engineering (A-E) Services for the concept design of a New Census Bureau Headquarters office complex located on the Suitland Federal Center at the intersection of Suitland Road and Silver Hill Road in Suitland, Maryland. The proposed facilities are two new office buildings of approximately 71,630 gross square meters each, plus two new parking structures, totaling approximately 3,100 spaces. The estimated total construction cost is approximately $306 million, with estimated construction duration of 36 months. Depending on funding constraints and timing, the buildings may be phased in a foundations/site package and a superstructure package. The concept design, in addition to the buildings and parking structures, will include, but not be limited to, office space, storage, health facility, food service, conference and training facilities, light industrial, fiber optic cable network distribution to desktops, state-of-the-art data and telephone communication systems, flexible/reconfigurable spaces, dedicated computer circuits and stabilized power with power distribution units, uninterruptible power system with standby generators, switchgear, all new underground utilities (i.e., electrical, water, sewage), building automation system, and the standard architectural, civil, structural, mechanical, fire/life safety, plumbing, HVAC, electrical, vertical transportation, and compliance with the Americans with Disabilities Act (ADA). The GSA is anticipating the utilization of a Bridging Method, where the concept design services are completed by an A/E under this solicitation, then the Design/Build services are completed under a separate RFP solicitation. The Bridging Method A/E services required under this solicitation will include a Master Plan for the Suitland Federal Center, siting for the office buildings and parking structures, site plan/site studies, Environmental Assessment, Program Verification and Design (up to concepts). For this solicitation, A-E design services will require, but are not limited to, preparation of drawings in metric, specifications, cost estimates, schedules, renderings, mock-ups, computer graphics, color/material selections and presentations, detailed design investigations, constructability reviews, systems design and calculations, life cycle costing, value engineering, site design, programming, space planning, construction documents, and other similar services as determined to be required. The following optional services may also be negotiated: Construction services such as submittal and shop drawing reviews, partnering, and other similar services. The A-E selection will be completed in the following stages: STAGE I: The first stage will establish the experience and capabilities of the A-E Design firm, and its lead designer. The Lead Designer is the individual or design studio who will have the primary responsibility to conceive the concept design for this facility. Each firm will be reviewed and evaluated during this stage using the following CRITERIA: (1) PAST PERFORMANCE ON DESIGN (35%). The A/E design firm shall submit graphics (maximum three graphics per project with maximum graphic size not to exceed 8-1/2" x 11") and a written description (maximum one single sided typed page per project) of five (5) construction projects completed within the last ten years. All five project descriptions shall include architectural and engineering design requirements. The A-E design firm shall clearly identify the portions of the submitted designs for which they have responsibility. The narrative shall address the design approach for and the important features of each project (include tangible evidence where possible, i.e., certificates, awards, peer recognition, etc. demonstrating design excellence). Provide a client reference contact for each project, including name, title, address, phone, and fax number. (2) PHILOSOPHY AND DESIGN INTENT (25%). In the lead designer's own words, (maximum of two single sided typed pages), state his/her overall design philosophy and approach to the challenge of public architecture, issues, and parameters that may apply in creating state-of-the-art headquarters office buildings for the Census Bureau, and in developing a Master Plan for the Suitland Federal Center. (3) LEAD DESIGNERS PORTFOLIO (25%). Submit a description (maximum one single sided typed page per project) and graphics (maximum three graphics per project with maximum graphic size not to exceed 8-1/2" x 11") of three (3) construction projects completed within the last ten years, attributed to the lead designer. Descriptions shall include a discussion of design challenges and resolutions. (4) LEAD DESIGNER PROFILE (15%). Submit a biographical sketch including education, professional experience and recognition for design efforts on projects. Identify and describe areas of responsibility. The biographical sketch should not exceed two single sided typed pages. Submit SF-254 and SF-255 for lead A-E firm only. Please note: In block 8 of the SF-254, please specify only current payroll (non-contract) personnel. Complete the SF 255 as follows: On page 3, complete items 1 through 3, and item 4 (B). Do not respond to item 5. On pages 4-10 inclusive, no response is required. On page 11, under item 10, respond to the Stage I evaluation criteria stated in this announcement. And in block 11, sign, name and title, and date the submittal. The Stage I short list will be published in the CBD and EPS approximately four to eight weeks following the due date for Stage I submissions. STAGE II: In the second stage of evaluation, each of the short listed firms will submit information for the total PROJECT TEAM. The Project Team shall be considered to include the A-E design firm, its designated lead designer, and ALL consultants who will be involved on the project. A sufficient period will be provided for the A-E design firms to establish the full project team and to respond to the Stage II requirements. The short listed A/E design firms will resubmit the SF 254 for any joint venture and/or consultants and a composite SF 255 for the proposed team. The Government will establish the criteria for the Stage II review and evaluation, and the date the Stage II submissions are due. The Stage II evaluations will culminate with an interview with members of the A-E Evaluation Board. The evaluations conducted in Stage I will be used solely for the purpose of establishing the short list and will not be used in the Stage II final selection process. Contact person for this solicitation is Chrischanda Smith, Contract Specialist, located at General Services Administration, National Capital Region, 7th & D Streets, S.W., Room 2021, Washington, D. C. 20407, telephone (202) 358-3573. The procurement is open to both large and small business concerns under the Small Business Competitiveness Demonstration Program. Before award of the contract, the A-E (if not a small business of $4,000,000 gross average annual sales receipts for the past three years) shall be required to present an acceptable Small Business Subcontracting Plan in accordance with Public Law 95-507. As part of its commitment to socioeconomic initiatives of the Federal Government, the General Services Administration has established national subcontracting goals of 40 percent for Small Businesses, which includes 5 percent for Small Disadvantaged Businesses, 3 percent for HUBZone small businesses, 2 percent for Veteran-Owned small businesses, and 5 percent for Woman-Owned Small Businesses. In support of the agency's efforts, firms seeking consideration for this contract shall demonstrate a proactive effort to achieve the above goals. The use of subcontractor consultants will be reflected in a Small Business Subcontracting Plan to be submitted with the Stage II submittal. Firms must provide a brief written narrative of outreach efforts made to utilize Small, Small Disadvantaged, HUBZone Small, Veteran-Owned Small and Woman-Owned Small Business concerns during Stage II. The narrative shall not exceed one single sided 8-1/2" x 11" typed page. An acceptable subcontracting plan must be agreed to before award. Small, Small Disadvantaged, HUBZone small, Veteran-Owned small, and Woman-Owned Small Business firms are strongly encouraged to participate as prime contractors or as members of joint ventures with other small businesses. All interested large business firms are reminded that the successful firm will be expected to place subcontracts to the maximum practical extent possible with Small, Small Disadvantaged, HUBZone Small, Veteran-Owned Small, and Woman-Owned Small Business firms as a part of their originally submitted teams. A-E firms having the capability to perform the services described in this announcement are invited to respond by submitting the required documents as outlined above for Stage I, along with a letter of interest to Vincent E. Matner, P.E., Contracting Officer, Bid Room #1065, GSA/NCR, 7th & D Streets, SW, Washington, DC 20407, . Stage I submittals are due no later than 3:00 P.M. local time on the due date of this notice. The following information shall be on the outside of the sealed envelope(s): 1) Solicitation Number/Title, 2) Due Date, 3) Closing Time. Late responses are subject to FAR Provision 52.214.7. Award of this contract is contingent upon Congressional funding approval. This contract is being procured under the Brooks Act and FAR Part 36. This is not a request for proposals.

Web Link

Electronic Posting System (http://www.eps.gov)

Record

Loren Data Corp. 20010703/CSOL004.HTM (W-180 SN50Q5F1)