93 -- PLASTIC SHEET

Notice Date

October 17, 2001

Contracting Office

General Services Administration, Federal Supply Service (FSS), General Products Center (7FX), 819 Taylor Street Room 6A24, Fort Worth, TX, 76102

ZIP Code

76102

Solicitation Number

Reference-Number-9330-01-358-7521

Response Due

October 18, 2001

Point of Contact

Joyce Scott, Purchasing Agent, Phone 817-978-8382, Fax 817-978-2041, Email joyce.scott@gsa.gov

Description

Looking for sources for plastic sheets. Please e-mail me at joyce.scott@gsa.gov. THIS IS NOT A QUOTE! NSN: 9330-01-358-7521 PLASTIC SHEET: Plain plastic sheet (no adhesive backing), with polished finish. Shall be in accordance with the following characteristics: Unit of issue ? Package of 20 sheets. Dimensions. Length 50 ? 1/16 inch, width 20 ? 1/16 inch, thickness 0.030 +0.003, -0.002 inch. Adjacent edges of sheets shall intersect at an angle of 90 ? 2?. Composition. Extruded plastic sheet consisting of polyethylene terephthalate (PET) or glycol-modified polyethylene terephthalate (PETG) in conformance with the following table of physical properties. Physical Properties Property, Units Property Value ASTM Test Method Density, g/cm? PET PETG 1.29 -- 1.411.23 -- 1.29 D 792 orD 1505 Spectral transmittance forClass 1 material, % Thickness * 0.030 inch Thickness 0.125 inch 85 minimum80 minimum D 1003 Tensile strength at yield, MPa 37 minimum D 882 orD 638 Finish. Plastic sheets shall have a polished finish on both sides. Workmanship. The plastic sheet shall be free from ragged edges, die lines, cracks, holes, pits, gel marks, blisters, discoloration, and other defects which would affect the appearance and serviceability of the item. The material shall be uniform in color, transparency or opacity, finish, density, and other physical properties. The terms cited in this paragraph shall be as defined in ASTM D 883. PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this Item Purchase Description, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. UNIT PACKAGING: Twenty (20) sheets shall be interleaved with paper, overwrapped with at least one layer of kraft paper, and sealed with tape. The packaged sheets shall be packed in a close-fitting corrugated fiberboard box, minimum bursting strength 200 psi (minimum edge crush strength 32 lb per inch width). PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the selected mode of transportation. The package shall be the same as that normally provided by the supplier. In the event a pallet or skid is used for shipping, the following notice shall apply: NOTICE: All lumber used inside or outside a shipment shall be BARK FREE. MARKING: Unit and intermediate packages shall include normal commercial marking. The shipping container shall be marked with the National Stock Number (NSN) and the requisition number in addition to any normal commercial markings present.

Web Link

Visit this URL for the latest information about this (http://www.eps.gov/spg/GSA/FSS/7FX/Reference-Number-9330-01-358-7521/listing.html)

Record

Loren Data Corp. 20011019/93SOL001.HTM (D-290 SN5108H0)