Loren Data Corp.

'

  
COMMERCE BUSINESS DAILY ISSUE OF NOVEMBER 14, 2001 PSA #2977
SOLICITATIONS

13 -- CARTRIDGE, FIRE EXT

Notice Date
November 9, 2001
Contracting Office
Department of the Air Force, Air Force Materiel Command, OO-ALC, OO-ALC/PKXD 6038 Aspen Ave (Bldg 1289), Hill AFB, UT, 84056
ZIP Code
84056
Solicitation Number
F42630-02-Q-0043
Response Due
December 10, 2001
Point of Contact
Linda Woodall, Procurement Technician, Phone 801-775-2093, Email linda.woodall@hill.af.mil
Description
PR Number: FD2020-02-60342 Item 0001 NSN 1377-00-756-1384ES P/N: 200230, P/N 841155-1, The fire ext cart is used to release fire retardant fluid from a container into the engine. Material-brass, length 1.4" Diameter-1", contains 2 electricall fired squibs and a slug projectile. Explosive weight. 0002 lbs 12ea. Applicable to: Common Acft. Destn: FMS Countries. Delivery: 31 JAN 2003 12 ea Item 0002 NSN 1377-00-756-1384ES Cartridge, Fire Ext P/N: 200230, P/N 841155-1, The fire ext cart is used to release fire retardant fluid from a container into the engine. Material-brass, length 1.4" Diameter-1", contains 2 electricall fired squibs and a slug projectile. Explosive weight. 0002 lbs 30ea. Applicable to: Common Acft. Destn: FMS Countries. Delivery: 31 JAN 2003 30 ea Item 0003 NSN 1377-00-756-1384ES Cartridge, Fire Ext P/N: 200230, P/N 841155-1, The fire ext cart is used to release fire retardant fluid from a container into the engine. Material-brass, length 1.4" Diameter-1", contains 2 electricall fired squibs and a slug projectile. Explosive weight. 0002 lbs 4ea. Applicable to: Common Acft. Destn: FMS Countries. Delivery: 31 JAN 2003 4 ea Item 0004 NSN 1377-00-756-1384ES Cartridge, Fire Ext P/N: 200230, P/N 841155-1, The fire ext cart is used to release fire retardant fluid from a container into the engine. Material-brass, length 1.4" Diameter-1", contains 2 electricall fired squibs and a slug projectile. Explosive weight. 0002 lbs 196ea. Applicable to: Common Acft. Destn: Hill Air Force Base, Ut 84056-5825. Delivery: 30 SEP 2002 196 ea Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The requirements of FAR 9.202(A) have been completed and copies of the qualification requirements and standards may be obtained as described in the solicitation. These qualification requirements apply to line item(s) 0001-0004 The anticipated award date will be 10 DEC 2001. Electronic procedure will be used for this solicitation. See our Web page. To: Applied Energy Technology Corp, Tempe Az 85282-1924. To: Kidde Technologies, Inc., Wilson Nc 27893-9643. Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements is cited in each individual solicitation. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor, concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call Roger Porter if your concerns are not satisfied by the contracting officer (801)777-6991. ATTENTION: Contractor must be registered with Central Contractor Registration to be eligible for contact award or payment from any DOD activity. Information on registration and annual confirmation requirements may be obtained by calling 1-888-227-2423, or via the Internet at http://www.ccr2000.com This part must be acquired from a manufacturing sources(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. Suitable technical data, government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application. Although, by DoD-STD-100 definition, altered and selected items shall have an adequate technical data package, data review discloses that required data or data rights are not in Government possession and cannot be economically obtained. This acquisition involves data that are subject to export control laws and regulations. Only contractors who are registered and certified with the Defense Logistics Services Center (DLSC) shall be provided copies of the solicitation or other data subject to foreign disclosure restrictions. Contact the Defense Logistics Services Center, 74 Washington Avenue N., Battle Creek, Michigan 40917-3084 (1-800-352-3572) for further information on the certification process. You must submit a copy of your approved DD Form 2345, Military Critical Technical Data Agreement, with your request for the solicitation. See Note (s) 26.=20
Web Link
Visit this URL for the latest information about this (http://www.eps.gov/spg/USAF/AFMC/OOALC/F42630-02-Q-0043/listing.htm l)
Record
Loren Data Corp. 20011114/13SOL004.HTM (D-313 SN5127C2)

13 - Ammunition and Explosives Index  |  Issue Index |
Created on November 9, 2001 by Loren Data Corp. -- info@ld.com