13 -- HANDLE ASSY, BOTTOM BAILOUT

Notice Date

December 3, 2001

Contracting Office

Department of the Air Force, Air Force Materiel Command, OO-ALC, OO-ALC/PKXD 6038 Aspen Ave (Bldg 1289), Hill AFB, UT, 84056

ZIP Code

84056

Solicitation Number

F42630-02-R-0141

Response Due

January 18, 2002

Point of Contact

Linda Woodall, Procurement Technician, Phone 801-775-2093, Email linda.woodall@hill.af.mil

Description

PR NUMBER FD2020-02-60377. Item 0001 NSN 1377-01-207-7089ES P/N: 2674100-101-03, Aircraft ejection system life support ballistic device. Predominant material is steel. Dimensions: 5.25" X 3.75" X 3.00" with a net expl wt of. 0020 lb. and is ballistically initiated. Function: sends explosive signal to jettison crew entry door during emergency egress. 4ea. Applicable to: B-1b. Destn: FV2172. Delivery: 30 SEP 2003 4 ea Item 0002 NSN 1377-01-207-7090ES Hdl Hatch Jtsn P/N: 2674300-301-02, Acft ejection sys (life support) ballistic device. Predominant matl aluminum with explosive charge of. 0003 lbs, length 3.8 in, width 3.8 in x 1.75 in. mechanical initiated. 80ea. Applicable to: B1b. Destn: FB2172. Delivery: 30 SEP 2003 80 ea Item 0003 NSN 1377-01-207-7091ES Handle Hatch P/N: 2674200-201-02, Acft ejection sys (life support) ballistic device. Predominant matl aluminum wi Th explosive charge of. 0003 lbs, length 3.8 in, width 3.8 in x 1.75 in. Mechan Ical initiated. 123ea. Applicable to: B-1b. Destn: FB2172. Delivery: 30 SEP 2003 123 ea Item 0004 NSN 1377-01-209-3847ES Handle Assy Cabin Air P/N: 2674100-101-03, Acft ejection sys (life support) ballistic device. Predominant matl aluminum with explosive charge of. 2116 lbs, length 5.00 in, width 3.8 in x 1.75 in. mechanical initiated. All suppliers of this item must meet all requirements of drawing L320C2004 Cage 43999 115ea. Applicable to: B-1b. Destn: FB2172. Delivery: 30 SEP 2003 115 ea. Electronic procedure will be used for this solicitation. See our Web page. To: Oea Aerospace Inc, Fairfield Ca 94533-0000. Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor, concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call Roger Porter if your concerns are not satisfied by the contracting officer (801)777-6991. ATTENTION: Contractor must be registered with Central Contractor Registration to be eligible for contact award or payment from any DOD activity. Information on registration and annual confirmation requirements may be obtained by calling 1-888-227-2423, or via the Internet at http://www.ccr2000.com This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. This acquisition involves data that are subject to export control laws and regulations. Only contractors who are registered and certified with the Defense Logistics Services Center (DLSC) shall be provided copies of the solicitation or other data subject to foreign disclosure restrictions. Contact the Defense Logistics Services Center, 74 Washington Avenue N., Battle Creek, Michigan 40917-3084 (1-800-352-3572) for further information on the certification process. You must submit a copy of your approved DD Form 2345, Military Critical Technical Data Agreement, with your request for the solicitation. See Note (s) 22.=20

Web Link

Visit this URL for the latest information about this (http://www.eps.gov/spg/USAF/AFMC/OOALC/F42630-02-R-0141/listing.htm l)

Record

Loren Data Corp. 20011205/13SOL003.HTM (D-337 SN5141X7)